|
Bids Are invited for Pan House Fabrication Work 1 , Pan House Fabrication Work 2 , Pan House Fabrication Work 3 , Pan House Fabrication Work 4 , Pan House Fabrication Work 5 , Pan House Fabrication Work 6 , Pan House Fabrication Work 7 , Pan House Fabrication Work 8 , Pan House Fabrication Work 9 , Pan House Fabrication Work 10 , Pan House Fabrication Work 11 , Pan House Fabrication Work 12 , Pan House Fabrication Work 13 , Pan House Fabrication Work 14 , Pan House Fabrication Work 15 , Pan House Fabrication Work 16 , Pan House Fabrication Work 17 , Pan House Fabrication Work 18 , Pan House Fabrication Work 19 , Pan House Fabrication Work 20 , Pan House Fabrication Work 21 , Pan House Fabrication Work 22 , Pan House Fabrication Work 23 , Pan House Fabrication Work 24 , Pan House Fabrication Work 25 , Pan House Fabrication Work 26 , Pan House Fabrication Work 27 , Pan House Fabrication Work 28 , Pan House Fabrication Work 29 , Pan House Fabrication Work 30 , Pan House Fabrication Work 31 , Pan House Fabrication Work 32 , Pan House Fabrication Work 33 , Pan House Fabrication Work 34 , Pan House Fabrication Work 35 , Pan House Fabrication Work 36 , Pan House Fabrication Work 37 , Pan House Fabrication Work 38 , Pan House Fabrication Work 39 , Pan House Fabrication Work 40 , Pan House Fabrication Work 41 , Pan House Fabrication Work 42 , Pan House Fabrication Work 43 , Pan House Fabrication Work 44 , Pan House Fabrication Work 45 , Pan House Fabrication Work 46 , Pan House Fabrication Work 47 , Pan House Fabrication Work 48 - Pan House Fabrication Work 1 - Pan House Dismantle The Damaged Pipeline At Various Locations Dispose Of It In The Scrap Yard And Install A New Pipeline (10Inch). , Pan House Fabrication Work 2 - Pan House Dismantle The Damaged Pipeline At Various Locations Dispose Of It In The Scrap Yard And Install A New Pipeline (8Inch). , Pan House Fabrication Work 3 - Pan House Dismantle The Damaged Pipeline At Various Locations Dispose Of It In The Scrap Yard And Install A New Pipeline (6Inch). , Pan House Fabrication Work 4 - Pan House Dismantle The Damaged Pipeline At Various Locations Dispose Of It In The Scrap Yard And Install A New Pipeline (4Inch). , Pan House Fabrication Work 5 - Pan House Dismantle The Damaged Pipeline At Various Locations Dispose Of It In The Scrap Yard And Install A New Pipeline (3Inch). , Pan House Fabrication Work 6 - Pan House Dismantle The Damaged Pipeline At Various Locations Dispose Of It In The Scrap Yard And Install A New Pipeline (2Inch). , Pan House Fabrication Work 7 - Pan House Dismantle The Bend At Various Locations. (500 Mm) , Pan House Fabrication Work 8 - Pan House Fabricate And Install A Bend At Various Locations. (500 Mm) , Pan House Fabrication Work 9 - Pan House Fabricate And Install A Bend At Various Locations. (10Inch) , Pan House Fabrication Work 10 - Pan House Fabricate And Install A Bend At Various Locations. (8Inch) , Pan House Fabrication Work 11 - Pan House Fabricate And Install A Bend At Various Locations. (6Inch) , Pan House Fabrication Work 12 - Pan House Fabricate And Install A Bend At Various Locations. (4Inch) , Pan House Fabrication Work 13 - Pan House Fabricate And Install A Flange At Various Locations. (500 Mm) , Pan House Fabrication Work 14 - Pan House Fabricate And Install A Flange At Various Locations. (10Inch) , Pan House Fabrication Work 15 - Pan House Fabricate And Install A Flange At Various Locations. (8Inch) , Pan House Fabrication Work 16 - Pan House Fabricate And Install A Flange At Various Locations. (6Inch) , Pan House Fabrication Work 17 - Pan House Fabricate And Install A Flange At Various Locations. (4Inch) , Pan House Fabrication Work 18 - Pan House Fabricate And Install A Flange At Various Locations. (3Inch) , Pan House Fabrication Work 19 - Pan House Fabricate And Install A Flange At Various Locations. (2Inch) , Pan House Fabrication Work 20 - Pan House Dismantle Fabricate And Install The Nipple At Various Locations. (500 Mm) , Pan House Fabrication Work 21 - Pan House Fabricate And Install A Nipple At Various Locations. (10Inch) , Pan House Fabrication Work 22 - Pan House Fabricate And Install A Nipple At Various Locations. (8Inch) , Pan House Fabrication Work 23 - Pan House Fabricate And Install A Nipple At Various Locations. (6Inch) , Pan House Fabrication Work 24 - Pan House Fabricate And Install A Nipple At Various Locations. (4Inch) , Pan House Fabrication Work 25 - Pan House Fabricate And Install A Nipple At Various Locations. (3Inch) , Pan House Fabrication Work 26 - Pan House Fabricate And Install A Nipple At Various Locations. (2Inch) , Pan House Fabrication Work 27 - Pan House Open And Close The Valve At Various Locations. (10Inch) , Pan House Fabrication Work 28 - Pan House Open And Close The Valve At Various Locations. (8Inch) , Pan House Fabrication Work 29 - Pan House Open And Close The Valve At Various Locations. (6Inch) , Pan House Fabrication Work 30 - Pan House Open And Close The Valve At Various Locations. (4Inch) , Pan House Fabrication Work 31 - Pan House Open And Close The Valve At Various Locations. (3Inch) , Pan House Fabrication Work 32 - Cut And Remove The Pan Distributor Dispose Of It In The Scrap Yard Fabricate A New One By Bending An 8/10 Mm Thick Ms Plate Install It Strengthen It And Carry Out A Satisfactory Trial. , Pan House Fabrication Work 33 - Cut And Remove The B Type Vacuum Crystallizer Capacity 45 Tons Installed On The Pan Dispose Of It In The Scrap Yard Fabricate A New One From The Supplied 12 Mm Thick Plate By Bending Install It At Its Original Location Complete All Connections Replace The Damaged Shaft Channel Angle Ribbon Carry Out Welding And Conduct A Leak-Proof Satisfactory Trial. Vacuum Crystallizer Size 7.30 M Length X 2.80 M Diameter) L.S. , Pan House Fabrication Work 34 - For The Molasses Receiving Tank (A-Heavy Syrup/C-Light Syrup) Cut And Remove The Damaged Shell And Partition Plate Dispose Of Them In The Scrap Yard Fabricate And Install A New Tank Similar To The Original Using 8/10 Mm Thick Plate Reconnect All Related Connections And Conduct A Leak-Proof Satisfactory Trial. Partition Plate Size Diameter 3.0 M Length 3.4 M (L.S.). Tank Bottom Shell Size Width 2950 Mm Length 4450 Mm. , Pan House Fabrication Work 35 - Remove The Damaged Catcher From The Pan Dispose Of It In The Scrap Yard Fabricate A New One From An 8/10 Mm Thick Plate Install The Element And Vapor Pipe As Before And Conduct A Trial. Size 1.5 M Diameter X 2.5 M Height. , Pan House Fabrication Work 36 - Dismantle The Corroded Portion Of The Tee Installed Above Dispose Of The Scrap In The Scrap Yard ( Size 1120 Mm Diameter X 3700 Mm Length.) , Pan House Fabrication Work 37 - Fabricate Tee From An 8/10 Mm Thick Plate Install It And Conduct A Satisfactory Trial. Size 1120 Mm Diameter X 3700 Mm Length. , Pan House Fabrication Work 38 - Fabricate And Install The Corroded Platform Of The Condenser And Crystallizer At The Pan Station Using Plate Material. , Pan House Fabrication Work 39 - Cut And Remove The Corroded Dome Plate Of Pan Nos. 1 And 6 Dispose Of The Scrap In The Scrap Yard Fabricate A New One From An 8/10 Mm Thick Plate And Install It. Size 3.10 M Diameter X 0.80 M Length. , Pan House Fabrication Work 40 - Cut And Remove The Weak/Damaged C-Light Molasses Conditioner (Approximate Size 2 M Length X 2 M Diameter) Dispose Of It In The Scrap Yard Fabricate And Install A New One From An 8 To 10 Mm Thick Plate Reinstall The Drive Shaft Arm Reduction Gearbox Etc. As Before Align Them And Conduct A Satisfactory Trial. (Work Location Height Approximately 45 Ft.) , Pan House Fabrication Work 41 - At The Pan Station Cut And Remove The Damaged Rectangular Cold Water And Hot Water Tank (Approximate Size Length 5.6 M Width 2.3 M Height 2.8 M) Dispose Of It In The Scrap Yard Fabricate And Install A New One From A 10/12 Mm Thick Plate Install All Connections Valves Etc. And Conduct A Leak-Proof Satisfactory Trial. (Work Location Height Approximately 60 Ft.) , Pan House Fabrication Work 42 - Dismantle The Weak Vapor Pipe Of Pan Nos. 1 To 6. (Size 1150 Mm Diameter Length 30 M) (Work Location Height Approximately 60 Ft.) , Pan House Fabrication Work 43 - Fabricate The Weak Vapor Pipe Of Pan Nos. 1 To 6 From 12 Mm Thick Plate. (Size 1150 Mm Diameter Length 30 M) (Work Location Height Approximately 60 Ft.) , Pan House Fabrication Work 44 - Fabricate And Replace The 600 Mm Diameter Manhole Of Pan No. 3 Using A 10 Mm Thick Plate. , Pan House Fabrication Work 45 - At Pan Nos. 5 And 6 Replace And Install The Corroded 6Inch Header Nipple Pipe And Flange Fit All Related Nipples Valves Etc. And Conduct A Satisfactory Trial. , Pan House Fabrication Work 46 - At Pan Nos. 4 And 5 Fabricate And Install The Catcher Element Using 75 X 75 X 8 Mm Angle. , Pan House Fabrication Work 47 - Cutting The Partition Plate Of The Syrup Tank Installed On The Pan And Putting It In The Scrap Yard And Replacing It With A New 10/12 Mm Plate. Size Width 2.72 M. Length 3.5 M. , Pan House Fabrication Work 48 - Cut And Remove The Syrup Header And Fabricate And Install A New Header.
|
