Tenders Are Invited For Installation Of Built-In Furniture – Renovation Of Town Hall, Geyerswörth Castle - C ... in Germany

Work Detail

Installation Of Built-In Furniture – Renovation Of Town Hall, Geyerswörth Castle - Carpentry Work, Built-In Furniture. General Quality And Design Requirements: Fitted Kitchens Mineral Panels, D = 20Mm, Lead Manufacturer: Dekton Bromo Or Glw Are Used As Worktops. For Visible Front And Side Panels Of The Body Parts, Real Wood Veneer Panels, 20Mm, Finished, Matt, Should Be Used. For Internal Shelves And Partitions, Furniture Construction Panels Should Be Used On All Sides With Hpl Laminate Surface, Plain Color, According To Samples From The Manufacturers Standard Pallet V20 Or V100 Boil-Proof Glued Fronts With Attached Foils Are Not Permitted Due To Their Low Mechanical Resistance. Care Must Be Taken To Ensure That The Cut And Edging Are Carried Out Neatly, So-Called Thick Or Butt Edges (Minimum Thickness 0.8 Mm, Better 1.5 Mm) (All-Round Thick Or Butt Edges). The Same Applies To Drawers. All Metal Parts Used For Fittings, Handles, Pull-Outs, Etc. Must Be Made Of Stainless Steel And Approved For Heavy-Duty Commercial Use. Wall And Base Cabinets Must Have The Same Space/Divisions. When Selecting The Cabinet Format, It Should Be Taken Into Account That If The Cabinets Are Hung On Top Of Each Other On Both Sides, The Upper Cabinets Are Also At An Appropriate Height. Adequate Ventilation Of The Cabinet Interior Must Be Ensured. Colors Based On Samples Provided By The Client The Bidder Must Comply With The Following Specifications And Obtain Hand Samples For Presentation To The Client. Highly Durable Dekton Bromo 20Mm Mineral Panels Must Be Used For The Worktops Of The Fitted Kitchens. The Doors Lie Against The Body When Closed. They Close Automatically Approx. 15° (Or 10 Cm) Before The Closed State And Have Soft Close Stop Dampers. The Stop Dampers On The Doors Are To Be Installed Recessed (Drilled). The Rear Wall Is Grooved And Pulled Forward (Rear Ventilation) Into The Body. The Drawer Boxes And Pull-Outs Consist Of Steel Frames With An Approx. 15 Mm Thick Hpl Coated Base Plate And Height And Width Adjustment With Millimeter Precision. The Drawers Must Be Designed With A Ball-Bearing, Low-Noise Rail Or Roller System And Secured Against Unintentional Complete Pull-Out (Full Extension, End-Locked). The Design Has Automatic Closing And Soft Closing (System Load Capacity At Least 30 Kg). Unless Otherwise Stated, The Following Should Be Used For Handles On Doors And Drawers Of Cabinets: Handle Strips Made Of Stainless Steel, Anodized, Rounded At The Ends, Or Other Sufficiently Large And Stable Handles, Screwed Through And Locked When Mounted. Handles Must Be Easy To Clean (Surfaces And Cubature). Selection Is Made Based On Sampling. Snap Hinges/Cup Hinges Should Be Used As Door Hinges, Which Must Be Installed At A Maximum Distance Of 80 Cm. The Height Of The Work Surface Should Be 90 Cm. 10 Cm High Base / Base Panel, Height Adjustable And Removable With Seal

Contact Information