|
Bids Are invited for Operation Ot Table - Height Adjustment , Lateral Tilt , Trendelenburg & Reverse Trendelenburg , Flex & Reflex , Back Up/Down Movement , Longitudinal Shift , 0 Position , It Should Have Electro - Hydraulic Base Locking Feature. , Base Cover Made Of Rugged Glass Fiber Reinforced Laminate/ Stainless Steel,Resistant To Impact, Breakage And Disinfectants,Dark Colored Dyed Throughout With Additional Scratch-Proof Enamel Finish. , Entire Table Top Frame And Column Cladding Should Be Made Of Stainless Steel To Avoid Rusting. , Special Double Layer Soft Padding With Latex Free Bi-Elastic Cover , Fixed With Velcro Straps On Plastic Carrier Plates, Radio Translucent. , Patient Orientation Should Be Possible On Both Sides Of The Table Top. , Minimum Loading Capacity Should Be 250Kg At Any Position. , The Table Top Is Fully Free Without Transverse Shadows On X-Ray Images And It Does Not Cast Shadows That Obstruct C-Arm Images. , The Clarity Of The C-Arm Image Should Not Be Compromised Due To Quality Of Table. , The Table Top Should Be Stable Throughout The Procedure To Ensure Patient Safety. , Special-Design, Maintenance-Free Rechargeable Batteries With Capacity For About A Weeks Use/Minimum 20 Operations On Single Charge,In The Operating Room. , Recharging Of The Batteries And Supply Of The Operating Table By Means Of Mains Cord. , Nominal Mains Voltage : 230-240V Ac Via A Mains Cord , Mains Frequency , 50/60Hz. , Electrical Safety Confirms To The Standards For Electrical Safety Iec 60601- 1 General Requirements And Iec 60601-2-46 For Particular Requirement For Ot Table.Shall Meet Internationally Recognized Iec 60601-1-2 For Electromagnetic Compatibility (Emc) And Electromagnetic Interference (Emi) , Height Without Padding : 650 - 950Mm Or Better , Trendelenburge / Reverse Trendelenburg: +25°/25° Or Better , Lateral Tilt , Both Directions : 15° Or Better , Back Plate Up/Down :75° / -35° Or Better , Flex / Reflex
|
