Tenders Are Invited For Construction Of Street Lighting At Ul. Kosciuszko (Us) in Poland

Work Detail

The Task Includes The Construction Of Lighting For The Connector Of The Municipal Road At Ul. Kościuszki With The 11-Go Listopada Road (Division 1509/1, 2337/2), Which Includes The Construction Of A Yakxs 4X35 Mm2 Cable Line With A Lighting Network Length Of Approx. 260 M, Together With Fezn 4*25 Mm Hoop Iron, Installation Of 6 Aluminum Lighting Poles, In A Color Similar To Ral 9011, Including 3 Pcs. With A Height Of 8 M (Poles No. 4, 5, 6) And 3 Pcs. With A Height Of 10 M (Poles No. 1, 2, 3), Poles Protected With Polyurethane Elastomer Up To The Height Of The Pole Recess, With Led Fixtures Mounted On Aluminum Booms In The Same Color As The Poles (Ral 9011). Fixtures With Factory-Installed Nema 5/7 Pin Or Zhaga Sockets, Along With Controllers Compatible With The Existing Smart City Street Lighting Control System. Luminaires On Poles No. 4, 5 And 6 And On Pole No. 1 With A Minimum Luminous Flux Of 5426 Lm And On Poles No. 2, 3 And On Pole No. 1 With A Minimum Luminous Flux Of 10836 Lm. The Shape Of The Fixtures Must Be Unified With The Existing Fixtures In The City Of Kolbuszowa, Due To The Aesthetics Of The City. The Construction Of This Network Requires The Use Of Pushes And Drillings, As Well As The Dismantling And Reconstruction Of The Sidewalk Surface (Paving Stones) In The Vicinity Of The Drillings And The Construction Of Poles No. 2 And 3. A Prior Site Visit Is Recommended. Work At Intersections With The Networks Of Other Operators (Energy, Gas) Should Be Carried Out In Consultation With The Network Owners And Acceptance Protocols For The Works To Be Covered Should Be Obtained. Before Starting The Work, The Materials To Be Installed Must Be Approved With The Investor. After Construction, The Lighting Network Must Be Submitted For Acceptance To Pge Dystrybucja Rejon Energetyczny Mielec And Completed With Positive Acceptance. Minimum Requirements For Control And Led Luminaires: The Offered Lighting Control And Management System For Each Luminaire Must Be Integrated With The Smartly.City System Already Installed In The Kolbuszowa Commune. The System Must Have Functionality At Least To The Extent That Is Already Installed And Operated By The Ordering Party. As Part Of The Delivery, The Ordering Party Expects The Delivery Of System Controllers Built Into Each Offered Fixture In The System - The Fixture Is Equipped With A Nema 5/7 Pin Or Zhaga Socket, A System Controller And A Current Jumper, Equipped With A Plug Suitable For Installation In This Socket. The Controllers Must Be Universal - Ensuring Control Of Both The Dali Digital Signal And The 0-10 V Analog Signal. Key Parameters Of The System Controller: Supply Voltage 230V, Impact Resistance Ik Minimum 06, Ip Tightness Level Minimum 66, Minimum Operating Temperature Range -40C To +50C, Radio Communication In The Unlicensed Frequency 868Mhz (In Accordance With The En 300 220 Standard) For Already Built-In The Ordering Partys Base Stations In The Kolbuszowa Commune. The Guardian Of Our Street L

Contact Information