|
Bids Are invited for Custom Bid For Services - Renovation And Tile Flooring Works At General Administrative And Main Time Office Building, Mcp - Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Fixing With Cement Based High Polymer Modified Quick-Set Tile Adhesive (Water Based) Conforming To Is: 15477 In Average 3 Mm Thickness Complete. Size Of Tile 600X600 Mm. , Dismantling Cement Concrete Including Disposal Of Materials/Rubbish Within 50M. Lead, 1:3:6 Or Richer Mix. , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm , Providing And Laying App (Atactic Polypropylene Polymer) Modified Prefabricated Five Layer 3 Mm Thick Water Proofing Membrane, Black Finished Reinforced With Non-Woven Polyester Matt Consisting Of A Coat Of Bitumen Primer For Bitumen Membrane @ 0.40 Litre/Sqm By The Same Membrane Manufacture Of Density At 25°C, 0.87-0.89 Kg/ Litre And Viscocity 70-160 Cps. Over The Primer Coat The Layer Of Membrane Shall Be Laid Using Butane Torch And Sealing All Joints Etc, And Preparing The Surface Complete. The Vital Physical Andchemical Parameters Of The Membrane Shall Be As Under : Joint Strength In Longitudinal And Transverse Direction At 23°C As 650/450N/5Cm. Tear Strength In Longitudinal And Transverse Direction As 300/250N. Softening Point Of Membrane Not Less Than 150°C. Cold Flexibility Shall Be Upto -2°C When Tested In Accordance With Astm, D - 5147. The Laying Of Membrane Shall Be Got Done Through The Authorised Applicator Of The Manufacturer Of Membrane : 3 Mm Thick , Grading Roof For Water Proofing Treatment With Cement Concrete 1:2:4 ( 1Cement:2 Coarse Sand:4 Graded Stone Aggregates 20 Mm Nominal Size) Only Crusher Broken Aggregate To Be Used. , Finishing Walls With Water Proofing Cement Paint Of Approved Brand And Manufacture (Viz Snowcem Plus Or Equivalent Quality) And Of Required Shade To Give An Even Shade For All Heights:Old Work One Or More Coats , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture:Old Work One Or More Coats. , Carriage Of Material By Mechanical Transport Including Loading, Unloading And Stacking:Lime, Moorum, Building Rubbish:Lead 1 Km. , Painting With Synthetic Enamel Paint Of Approved Brand (Asian, Nerolac, Berger Etc.) And Manufacture To Give An Even Shade:Old Work One Or More Coats On Wall/Steel/Wooden Surface Etc. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade.Two Or More Coats On New Work Over An Under A Coat Of Suitable Primer Of Approved Quality. , Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Meters And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 M Lead: With Cement Mortor 1:6 (1 Cement:6 Sand) , 6 Mm Cement Plaster Of Mix 1:4 (1 Cement: 4 Sand). , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length ( Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).Sal Wood , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means Over Areas (Exceeding 30Cm In Depth. 1.5M In Width As Well As 10 Sqm On Plan) Including Disposal Of Excavated Earth, Lead Upto 50M.: In All Kinds Of Soils Except Rocks. , Providing And Laying 60Mm Thick Factory Made Cement Concrete Interlocking Paver Block Of M -30 Grade Made By Block Making Machine With Strong Vibratory Compaction, Of Approved Size, Design & Shape, Laid In Required Colour And Pattern Over And Including 50Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Line Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge. , Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls(Any Thickness) Including Attached Pilasters, Columns, Piers,Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses,Parapets, Coping, Bed Block Etc.: 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size). , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete. , Providing And Laying Brick Work With Locally Best Available Bricks In Cement Mortar 1:6 (1Cement:6 Sand) In Super Structure Above Plinth (Floor One Level) To Floor Two Level. , Providing 40X5 Mm Flat Iron Hold Fast 40 Cm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 30X10x15cm 1:3:6 Mix (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size).Only Crusher Broken Aggregate To Be Used. , Replacing Broken Glass Panes With Transparent Acrylic Sheet In Doors/Windows/Ventilators At Any Height Including Provide Fixing Putty, Clips Etc Wherever Required.-( 6 Mm Thick). , Providing And Fixing Isi Marked Oxidized M.S. Handles Conforming To Is: 4992 With Necessary Screws Etc. Complete. 100 Mm , Providing And Fixing M.S. Sliding Door Bolts, With Nuts And Screws Etc. Complete Of Size 300 X 16 Mm. , Providing And Fixing M.S. Tower Bolt (Barrel Type) With Necessary Screws, Etc. Complete.Size 150 X 10 Mm. , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area 3 Sq. Metres And Below.
|
