Tenders Are Invited For Delivery Of A 3D Scanner For Metrological Control in Bulgaria

Work Detail

The Offer Must Include: Delivery Of A Laser 3D Scanner For Metrological Control With Scanning Software - 1 Pc.; Installation, Calibration And Initial Commissioning Of The Scanner And Training Of Operators To Work With The Supplied Equipment; Documentation – Description, Operating Instructions And Calibration Of The Scanner; Warranty And Support. Place Of Execution Of The Order: City Of Varna, 9003, Quarter Asparuhovo, P.K. 58, William Froude St. No. 1 - Center For Hydro - And Aerodynamics - Varna. Basic Minimum Scanner Requirements Hand-Held Free Scanner With An Accuracy Of 0.02 Mm Traceable To The Requirements Of The Iso 17025 Standard Or Equivalent. To Be Light And Convenient For The Manual Operation Of The Operator; The Scanner Guarantees Accurate Measurement Results When Measuring Objects Of Different Materials And Colors. To Be Able To Scan Both Large Objects (Ship Models Up To 9 M Long, 1.5 M Wide And 0.8 M High) Without Using Markers, As Well As Small Objects. The Optical Measurement Technology Used (Including A Hybrid Laser System) Must Be Capable Of Maintaining The Specified Measurement Accuracy And Performance When Scanning The Following Surfaces – Metal (Brass, Aluminum Steel), Composite And Polymer Surfaces, Plastic Details And Models, Wooden Models Unpainted And Painted In Yellow Color Including Dark And Reflective Objects; Have A Minimum Of Four Scanning Modes – Multi-Line, Single-Line, Fine And Infrared To Be Able To Scan Both Small Objects With High Accuracy And Large Objects; The Scanner Must Be Capable Of High-Speed Scanning, Fine-Detail Scanning, And Depth Scanning Of Openings Or Depressions In The Area Under Study; The Scanner Should Have A High Speed Of Over 3,000,000 Points/S To Ensure Optimal Time For Scanning Large Objects; The Working Distance Should Be Greater Than Or Equal To 300 Mm; The Depth Of The Scanning Field Should Be In The Range Of At Least 600 Mm; The Maximum Single Scan Range Should Be Greater Than Or Equal To 600 Mm X 600 Mm; The Scanner Must Be Able To Connect To A Computer/Laptop With A Usb 3.0 Interface; Volumetric Accuracy Not Worse Than 0.02+/-0.033Mm/M The Scanner Has Available Scanning Software With A Perpetual License; One Of The Output File Formats Of The Scan Result Is Stl Type The Software Should Have The Ability To Import The Scan Data Into The Software To Compare With The Design File And Check For Deviations. The Scanner Must Be Equipped With: Calibration Board; Markers Of 3 Mm And 6 Mm Minimum 200 Pcs. Suitcase For Transportation.​​​​​​​ More Details The Documentation Of The Op.

Contact Information