|
Tender for Construction/ Fabrication Of Milk Parlours Cum Amrit Pharmacies At Sant Shiromani Shri Dhanna Bhagat Ji Government Medical College, Jind , Booth , 4.4.1Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Up To 50 M And Lift Up To 1.5 M. , 4.14.1Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , 10.100.2Cement Concrete 1:8:16 With Stone Aggregate 40 Mm Size In Foundation And Plinth. , 7.21.1Brick Work With Common Burnt Clay Non-Modular Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) , 7.22.2Brick Work With Common Burnt Clay Non-Modular Bricks Of Class Designation 10.5 In Superstructure Above Plinth Level Up To Floor Iv Level In All Shapes And Sizes In : Cement Mortar 1:6 (1 Cement : 4 Coarse Sand) , 11.5.312 Mm Cement Plaster Of Mix : 1 :4 (1 Cement: 4 Fine Sand) , 10.73Providing And Fixing Ceramic & Glazed Tiles/ Vitrified Tiles/ Of Any Size Of Sqm Approved Make In Floors / Dados, Laid In Any Pattern As Specified Over Base Of 3 Mm Thick Adhesive Of Reputed Brands As Per Is Specification 15477-2004 Using 5 Kg. Adhesive Area Of Tiles And Jointed With White Cement Slurry Mixed With Pigment To Match The Shade Of Tiles Excluding Cost Of Tiles. , 10.70Extra For Grouting Joints Of Floor Tiles Using Epoxy Grout Mix , 12.160.1Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is : 6315, Having Brand Logo Embossed On The Body / Plate With Double Spring Mechanism And Door Weight Up To 125 Kg, For Doors, Including Cost Of Cutting Floors, Embedding In Floors As Required And Making Good The Same Matching To The Existing Floor Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Engineer-In-Charge. With Stainless Steel Cover Plate Minimum 1.25 Mm Thickness , 7.28.1Half Brick Masonry With Common Burnt Clay Non-Modular Bricks Of Class Designation 10.5 In Superstructure Above Plinth Level Up To Floor Iv Level , 8.32 Aluminium Composite Sheet Of Required Colour And Design As Per Directions Of Engineer-In-Charge , 9.31Providing And Fixing Hi, Rib Profiled Sheets 0.60Mm Tt (Total Thickness) Sqm (Only± 0.2Mm Tolerance Allowed) Hi Tensile Galvalume/Zincalume Steel Sheet Of The Approved Make Having A Hot Dip Metallic Zinc-Aluminium Alloy (Az-150) Coating Of Minimum (150 Gms/Sqm) With 550 Mpa Yield Strength Of Approved Blue Colour (Ral-5012) The Colour Coating Shall Be As Per Is 15965 Of Smp Or Super Durable Polyester Paint Xrw Fixed With Hex Head Self-Drilling Screw Sloping Roof Without Curvature As Per Approved Specification, Drawing And Design. , 12.177.1Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . With Toughened Glass Panes Of 6 Mm Thickness , Nsproviding And Fixing Acrylic Letter Without Module Led Size 12 Height Inclusive The Cost Of Fitting And Wiring Complete In All Respect As Per The Direction Of Engineer-In-Charge. , 12.88Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 356 4, Embossed On The Body, Door Weight Up To 35 Kg And Door Width Up To 700 Mm), With Necessary Accessories And Screws Etc. Complete. , 13.29.3 Steel Work Welded In Tubular Section, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. , 9.34.2Flashing/Apron , 9.34.6Gutter , 11.73.1Finishing With Epoxy Paint (Two Or More Coats) At All Locations Prepared And Applied As Per ManufacturerS Specifications Including Appropriate Priming Coat, Preparation Of Surface, Etc. Complete. On Steel Work , 22.2.1Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm Dia Cp Brass Single Hole Basin Mixer Of Approved Quality And Make, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required:- White Vitreous Chinaware Wash Basin Size 550X400 Mm With A 15 Mm Cp Brass Single Hole Basin Mixer , 22.5Providing And Fixing White Vitreous Chinaware Pedestal For Wash Basin Completely Recessed At The Back For The Reception Of Pipes And Fittings. , 22.10.2.1Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is:13983 With C.I. Brackets And Stainless Steel Plug 40 Mm, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required : Kitchen Sink Without Drain Board 610X510 Mm Bowl Depth 200 Mm , 22.14.1.2Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. Semi Rigid Pipe, 40 Mm Dia , 22.17.2Providing And Fixing 40Mm I/D Chromium Plated Trap With Chromium Plated Pipe To Wall With Walflange Completed For Use With Sinks , 22.20.2Providing And Fixing In Position C.I. Plain Nahani Trap Conforming To I.S.I. Specifications And Of Self Cleaning Design With C.P. Brass Hinged Grating With Frame Complete, With 75 Mm Internal Diameter Outlet , 22.108.1Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 , 22.86.3Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. 25 Mm Nominal Outer Dia Pipes , 22.85.3Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. 25 Mm Nominal Outer Dia Pipes , 22.86.2Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. 20 Mm Nominal Outer Dia Pipes , 22.104.1Providing And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Is:8931 : 15 Mm Nominal Bore Ea , 22.101.2.2Providing And Fixing Unplasticised Pvc Connection Pipe With Brass Unions : 45 Cm Length 20 Mm Nominal Bore , 22.105.1Providing And Fixing C.P. Brass Long Nose Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 810 Gms. 15 Mm Nominal Bore , 22.109Providing And Fixing C.P. Brass Extension Nipple (Size 15Mmx50mm) Of Approved Make And Quality As Per Direction Of Engineer-In-Charge. , 22.117Providing And Fixing Ptmt Liquid Soap Container 109 Mm Wide, 125 Mm High And 112 Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour, Weighing Not Less Than 105 Gms. , 22.173.1Constructing Masonry Chamber 30X30x50 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement :4 Coarse Sand) For Stop Cock, With C. I. Surface Box 100X100 X75 Mm (Inside) With Hinged Cover Fixed In Cement Concrete Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size), I/C Necessary Excavation, Foundation Concrete 1:5:10 ( 1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : With Common Burnt Clay Non-Modular Bricks Of Class Designation 7.5 , 22.181Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And S , 22.222.1.2Providing And Fixing In Position Singel Socket Swr Upvc Soil Waste Or Antisyphonage Pipes As Per Is 13592 Of E.D.C Manufacture Or Of Any Other Reputed Firm Including Cutting, Jointing, Wastage, But Excluding Cost Of Jointing. 1.1 Single Socket Type A 110Mm O/D Swr Upvc Pipe Lines Laid Complete , 22.222.1.4Providing And Fixing In Position Singel Socket Swr Upvc Soil Waste Or Antisyphonage Pipes As Per Is 13592 Of E.D.C Manufacture Or Of Any Other Reputed Firm Including Cutting, Jointing, Wastage, But Excluding Cost Of Jointing. 1.1 Single Socket Type A 75 Mm O/D Swr Upvc Pipe Lines Laid Complete , 9.57.3Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I) Single Socketed Pipes. 150 Mm Diameter , 9.58.5.1Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/ Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion. Bend 87.5° 75 Mm Bend , 9.58.5.2Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/ Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion. Bend 87.5° 110 Mm Bend , 9.58.5.3Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/ Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion. Bend 87.5° 150 Mm Bend , 9.58.3.2Single Tee With Door 110X110x110 Mm , 9.58.2.2Single Push Fit Coupler 110 Mm , 9.58.2.1Single Push Fit Coupler 75 Mm , 13.41Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories And Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , 6.14.1Providing And Laying In Position Cement Concrete Of Specifiedgrade Excluding The Cost Of Centering And Shuttering - All Work Below Plinth Level And Up To Floor Iv Level: 1 : 1 ½: 3 , 12.73.1Butt Hinges , 12.75.2Ss Handles , 26.2Good Earth , 10.1.1Providing And Laying Of Base Course Of Floors Consisting Of 100 Mm Thick Sqm Cement 1 :8: 16 And 100 Mm Sand Or Stone Filling. , 9.32.2Providing & Fixing Uv Stabilised Fibreglass Reinforced Plastic Sheet Roofing Up To Any Pitch, Including Fixing With Polymer Coated J Or L Hooks, Bolts & Nuts 8Mm Dia. G.I Plain/Bitumen Washers Complete But Excluding The Cost Of Purlins, Rafters, Trusses Etc. The Sheets Shall Be Manufactured Out Of 2400 Tex Panel Rovigs Incorporating Minimum 0.3% Ultra-Violet Stabiliser In Resin System Under Approximately 2400 Psi And Hot Cured. They Shall Be Of Uniform Pigmentation And Thickness Without Air Pockets And Shall Conform To Is 10192 And Is 12866.The Sheets Shall Be Opaque Or Translucent, Clear Or Pigmented, Textured Or Smooth As Specified. 2 Mm Thick Flat , 23.22.1.9Supply And Erection Of Modular Case Circuit Breaker Single Pole/4 Pole On Existing Wall/Pedestal/Panel Including Bounding To Earth And Making Necessary Connections Required To Complete The Job In All Respect Up To The Entire Satisfaction Of The Engineer-In-Charge Of The Work. 4 Pole Mccb 6 annual periodical maintenance To 100 annual periodical maintenance , 25 Ka , 23.22.2.1Mccb Enclosure Made Of Sheet Steel Suitable For Mounting Mccb Of Following Ratings Mccb Up To 125 A Fp , 23.22.4.9Supply And Erection Of Double Door Sheet Steel Enclosure Distribution Board Suitable For Mcbs And Elcbs Etc. Recessed In Wall Including Bonding To Earth With All Labour And Material Required To Complete The Job In All Respect Up To The Entire Satisfaction Of The Engineer-In-Charge Of The Work. Vertical Tpn Db Double Door 4 Way ( 8 Incoming 3Phase*12 Outgoing) , 23.22.5.4Supply And Erection Of Miniature Circuit Breaker 240/415 V In The Existing Distribution Board Including Making Necessary Connections:- 40 annual periodical maintenance To 63 Amp. Mcbs Double Pole , 23.22.5.1Supply And Erection Of Miniature Circuit Breaker 240/415 V In The Existing Distribution Board Including Making Necessary Connections:- 6 Amp. To 32 annual periodical maintenance Single Pole , 24.1.3Earthing With Tinned Gi Earth Plate 600Mmx600mmx6mm Thick Including Accessories And Providing Masonry Enclosures With Cover Plate Having Locking Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) Etc. Complete As Required. , 24.1.5Extra For Charcoal Or Coke And Salt For G. I. Plate Or Copper Plate Earth Electrode. , 24.1.7Providing And Fixing 25 Mm X 5Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required With All Labour And Material. , 23.5.3Wiring Only In Existing Conduit And Ms Box For Light/Fan/Call Bell Point In 1.5 Sqmm Frls Pvc Insulated Copper Conductor Cable , Without Separate , 23.5.5Wiring In Existing Conduit System For 3-Pin 15Amp. Plug Point By Using 2 No 4 Sqmm Frls Copper Wire And 1 No 4 Sqmm Frls Copper Wire For Earthling, Including Providing 1 No 15/16 annual periodical maintenance 3/6 Pin Socket And 1 No 15/16 annual periodical maintenance Switch Etc Complete As Required , 23.5.6.2Wiring Main And Sub Mains In Two Single Core For Phase And Neutral Wire And One Single Core For Earth Wire Pvc Insulated Copper Conductor Cable 1100 Volts Grade In Existing Ms/Pvc Conduit Etc As Required. 1 Run Of Size 2.50 Sqmm(1.1.80Mm) , 23.5.6.1Wiring Main And Sub Mains In Two Single Core For Phase And Neutral Wire And One Single Core For Earth Wire Pvc Insulated Copper Conductor Cable 1100 Volts Grade In Existing Ms/Pvc Conduit Etc As Required. 1 Run Of Size 1.50 Sqmm(1.1.80Mm) , 23.5.6.3Wiring Main And Sub Mains In Two Single Core For Phase And Neutral Wire And One Single Core For Earth Wire Pvc Insulated Copper Conductor Cable 1100 Volts Grade In Existing Ms/Pvc Conduit Etc As Required. 1 Run Of Size 4 Sqmm(1.1.80Mm) , 23.5.6.4Wiring Main And Sub Mains In Two Single Core For Phase And Neutral Wire And One Single Core For Earth Wire Pvc Insulated Copper Conductor Cable 1100 Volts Grade In Existing Ms/Pvc Conduit Etc As Required. 1 Run Of Size 6 Sqmm(1.1.80Mm) , 23.7.6.2Supply And Erection Of Pvc Conduit Isi Marked (Medium) Recessed In Walvceiling Etc. Including The Cost Of Pvc Bends, Inspection Boxes, Iron Hooks And Cement Concrete Etc. Complete In All Respect Up To The Entire Satisfaction Of Engineer-In-Charge Of Work. Pvc Pipe Of 25 Mm Dia. , 23.7.6.4Supply And Erection Of Pvc Conduit Isi Marked (Medium) Recessed In Walvceiling Etc. Including The Cost Of Pvc Bends, Inspection Boxes, Iron Hooks And Cement Concrete Etc. Complete In All Respect Up To The Entire Satisfaction Of Engineer-In-Charge Of Work. Pvc Pipe Of 40 Mm Dia. , 23.8.11.1Providing And Fixing Modular Type Accessories Of Approved Make In Existing Box Including Fixing And Making Necessary Connections, Complete In All Respect. 5 annual periodical maintenance 1 Way Switch , 23.8.11.315 annual periodical maintenance 1 Way Switch , 23.8.11.45 annual periodical maintenance Socket , 23.8.11.515 annual periodical maintenance 6 Pin Socket , 23.8.11.7Step Type Fan Regulator 2 Modules 300 Watt , 23.8.11.10Blanking Plate , 23.8.1.5Ceiling Rose Flush/Surface Type , 23.8.10.3Providing And Fixing Gi Concealed Sheet Metal Boxes With Inner And Outer Face Plate Including Concealing The Box In Wall And Fixing In Position With Inner Plate And Face Plate With All Labour And Material Required For The Job Complete In All Respects. 4 Modules , 23.8.10.4Providing And Fixing Gi Concealed Sheet Metal Boxes With Inner And Outer Face Plate Including Concealing The Box In Wall And Fixing In Position With Inner Plate And Face Plate With All Labour And Material Required For The Job Complete In All Respects. 6 Modules , 23.8.10.5Providing And Fixing Gi Concealed Sheet Metal Boxes With Inner And Outer Face Plate Including Concealing The Box In Wall And Fixing In Position With Inner Plate And Face Plate With All Labour And Material Required For The Job Complete In All Respects. 8 Modules , 23.8.10.6Providing And Fixing Gi Concealed Sheet Metal Boxes With Inner And Outer Face Plate Including Concealing The Box In Wall And Fixing In Position With Inner Plate And Face Plate With All Labour And Material Required For The Job Complete In All Respects. 12 Modules , 23.8.10.2Providing And Fixing Gi Concealed Sheet Metal Boxes With Inner And Outer Face Plate Including Concealing The Box In Wall And Fixing In Position With Inner Plate And Face Plate With All Labour And Material Required For The Job Complete In All Respects. 3 Modules , 23.8.4Supply And Erection Of 10.5 Cm Dia M.S.Fan Box Including 8 Mm Dia 30 Cm Long M.S. Road Made Into Suitable Suspension Hook And Erected In Reinforced Cement Concrete Slab For The Erection Of Fan Complete With All Labour And Material Required To Complete The Job. , 20.72Supplying, Errection, Testing Of Exhaust Fan (As Per Is Code 374) Having A Capacity Of 45 Cubic Metre Per Minute Complete With Suitable G.I Sheet Ducting In Structure Confirming To Latest Is Specifications Complete In All Respect To Satisfaction Of Engineer-In-Charge. , Nsproviding And Fixing Of Cob Lights 15W Of Make Hilips, Havells, Wipro, Crompton Or Equivalent Reputed Brand As Approved By Engineer-In-Charge. , 24.14.23Providing& Erection/ Laying Of Pvc/ Xlpe Insulated Underground Aluminium Conductor Underground Cable Onsurface/ Existing Cable Tray Complete In All Respect With Necessary Connection Upto The Entire Satisfaction Of Engineer In Charge Of The Work 16 Sq Mm 4 Core (Unarm.) , 23.23.7.1Supply And Erection Of Cable Tray Cover Made Of 1.25 Mm Thick Gi Sheet As Required Including Erection Of The Same On Existing Cable Tray With Necessary Fixture And Other Material Required To Complete The Job In All Respect Up To The Entire Satisfaction Of Engineer-In Charge Of The Work.
|
