|
Tender for Supply, Installation, Testing & Commissioning Of Semi Automatic Besan Mill 0.5 Tph , Supply, Installation, Testing & Commissioning Ofsemi Automatic Besan Mill 0.5 Tph As Per Details Given In Bid Document , Raw Material Feeding Hopper- • Heavy-Duty Ms Hopper With Suitable Feeding Arrangement; Adequate Capacity For Continuous Feeding; Provision For Controlled Feeding To Pulveriser. , Bucket Elevator- • Box Size Minimum 7 × 7; • Cotton/Nylon Belt; • Minimum 4 Pvc Buckets; • Lifting Height 8-12 Ft Or As Required By Layout; • Minimum 2 Hp Motor; • Suitable Guards And Discharge Arrangement; • Capacity Compatible With 0.5 Tph Plant. , Impact Pulveriser- • Heavy-Duty Impact Pulveriser Suitable For Besan; • Minimum Rated Output 500 Kg/Hr. Under Specified Operating Conditions; • Ms Outer Body; • Suitable Grinding Chamber; • Ss/Food-Grade Product-Contact Components; • Ss Hammer/Blade As Applicable; • Suitable Screen/Mesh For Required Fineness; • En8 Shaft; • Heavy-Duty Bearings; • Cyclone Connection; • Belt Guard; • Machine Base; • Suitable Motor And Pulley Arrangement. , Pneumatic System- • Complete Pneumatic Conveying System Including Ms/Food-Grade Suitable Pipeline As Applicable, Cyclone, Blower, Air-Lock, Dust Collector, Cotton Filter Bags Where Applicable, Stands And Clamps. • System Shall Be Adequately Sized For 0.5 Tph Plant And Shall Minimize Dust Emission. , Centrifugal Machine (Heavy Duty)- • Heavy-Duty Centrifugal/Sieving Unit Suitable For Besan; • Ms Body And Hopper; • Suitable Food-Contact Sieve/Mesh; • En8 Shaft; • Screw Conveyor/Flight Where Required; • Belt And Pulley Drive; • Access Door And Cover; • Output Compatible With Minimum 0.5 Tph Plant , Storage Tank- • Minimum 4000 Kg Capacity Each; • Two Tanks; • Steel Or Equivalent Food-Grade Suitable Material; • Suitable Inlet/Outlet, Inspection/Access Arrangement And Discharge Control; • Adequate Structural Support. , Platform- • Ms Structural Platform Suitable For Complete Plant Layout; • Approximately 15 Ft × 20 Ft Or As Per Approved Site Layout; • Adequate Load-Bearing Capacity; • Staircase, Handrail, Toe Guard And Safety Arrangement; • Anti-Skid Flooring/Platform Surface. , Semi-Automatic Bagging & Weighing Machine- • Semi-Automatic Net/Gross Weighing Type; • Weighing Range 10-50 Kg; • Suitable For Besan; • Minimum Weighing Accuracy As Per Manufacturer Standard And Not Poorer Than ±50 G For 50 Kg Range; • Load-Cell Based Weighing; • Digital Controller/Display; • Bag Clamping And Gravity Discharge; • Suitable For Continuous Operation. , Electrical Motor- • All Motors Shall Be Reputed Make Or Equivalent, Ie2/Ie3 Efficiency Where Available, Suitable For Continuous Duty And 415 V, 3 Phase, 50 Hz. • Separate Motors For: Pulveriser, Blower, Centrifugal Unit And Elevator As Required. • No Arbitrary Over Sizing Shall Be Accepted. , Electrical Panel Board- • Floor/Wall Mounted Ms Powder-Coated Panel; • Minimum Ip54; 415 V, 3 Phase, 50 Hz; • Suitable Incomer Mccb/Isolator, Mcb/Mpcb/Overload Protection, Contactors, Relays, Indication Lamps, Emergency Stop, Proper Earthing And Cable Termination. • Panel Shall Be Adequately Rated For Installed Load. • Panel Rating Shall Be Stated In Kva/A, Not Kv. • Complete Internal Power/Control Cabling, Cable Trays/Conduits, Glands, Lugs, Earthing, Termination, Interlocking And Electrical Installation From Panel To All Supplied Machines. • Belt/Pulley Guards, Emergency Stop, Warning Labels, Earthing, Overload Protection, Suitable Foundation/Anchor Fasteners, Flexible Connections, Clamps, Supports And All Accessories Required For Safe Operation. , Supply, Loading-Unloading, Erection, Installation, Testing, Commissioning And Training- Supply, Loading-Unloading, Erection, Installation, Testing, Commissioning And Trial Run Shall Be Included. Training For Operators Shall Be Provided. Operation & Maintenance Manual Should Be Provided.
|
