Tender For Supply, Installation, Testing And Commissioning Of Rotary Drum Dryer For Hay Making 20 Hp (2.5 Mt ... in India

Work Detail

Tender for Supply, Installation, Testing And Commissioning Of Rotary Drum Dryer For Hay Making 20 Hp (2.5 Mt/Hr) , Supply, Installation,Testing & Commissioning Of Of Rotary Drum Dryer For Hay Making 20 Hp (2.5 Mt/Hr) Equipment With Minimum Technical Specification Mentioned In The Bid Document. , Rotary Drum Dryer For Hay Making 20 Hp (2.5 Mt Per Hr)- • A Rotary Drum Dryer Is Continuous Drying Equipment Used For Reducing Moisture Content From Bulk Materials By Direct Or Indirect Heating. The Machine Consists Of A Rotating Cylindrical Drum Mounted At A Slight Inclination, Allowing Material To Move From The Feed End To The Discharge End While Being Exposed To Hot Air. • Machine Type: Continuous Rotary Drum Dryer • Drum Material: Mild Steel (Ss316) Or Any Food Grade Equivalent • Drum Diameter: Approx. 1600 Mm - 2600 Mm • Drum Length: Approx. 7 To 9 Meter • Capacity: Minimum 2.5 Mt Per Hour • Moisture Reduction: Up To 70 % To Below 8-15% • Drum Speed: Minimum 0.5 - 11 Rpm • Heating Type: Direct / Indirect Heating • Heat Source: Biomass, Coal Etc. • Operating Temperature: Minimum 65°C - 300°C • Motor Power: Approx. 3 Kw - 160 Kw Or Minimum 20 Hp • Air Flow System: Co-Current / Counter-Current • Inclination Angle: Approx. 3° - 5° • Thermal Efficiency: Up To 80% • Operation Mode: Automatic / Semi-Automatic • Fuel Consumption: Depends On Material Moisture And Capacity • Control Panel: Plc / Electrical Control Panel • Drive System: Gearbox With Motor & Chain/Sprocket Drive • Support System: Tyre Rollers & Support Rollers • Dust Collection: Cyclone Separator / Bag Filter • Feeding System: Screw Conveyor / Belt Conveyor • Discharge System: Screw Conveyor / Rotary Valve • Following Machinery Equipment Shall Be Included: 1. Rotary Drum Shell: Heavy-Duty Rotating Cylindrical Body. 2. Internal Flights / Lifters: Lift And Shower Material Through Hot Air For Efficient Drying. 3. Burner / Furnace: Generates Hot Air Using Biomass, Gas, Diesel, Or Coal. 4. Drive Assembly: Motor, Gearbox, Girth Gear, And Pinion Arrangement. 5. Support Rollers: Support Drum Rotation And Alignment. 6. Feeding Hopper: Controlled Feeding Of Wet Material. 7. Cyclone Separator: Separates Dust Particles From Exhaust Air. 8. Induced Draft Fan: Maintains Airflow And Negative Pressure. 9. Control Panel: ControlS Temperature, Rpm, Airflow, And Safety Systems. 10. Blower Specification- 45000-60000 Cfm Motor Specification 15 Hp Hopper Size: Minimum 260 Liter , Supply, Loading-Unloading, Erection, Installation, Testing, Commissioning And Training- Supply, Loading-Unloading, Erection, Installation, Testing, Commissioning And Trial Run Shall Be Included. Training For Operators Shall Be Provided. Operation & Maintenance Manual Should Be Provided.

Contact Information