|
Tender For Repair, Painting And Polishing Of Certain Furniture At Zone-I & Ii At Likabali Mil Stn Under Ge 872 Ews- 1 S & F In Repair Lock, 40Mm Size, 6 Lever Lock, Brass With Duplicate Keys Fixed To Almirah Large/Med Steel Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-1031/1032/ & Fd/E6Map/18) 2 S & F In Repair Mild Steel Handle, 120Mm Size,Chromium Plated Fixed To Almirah Large/Med Steel Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-1031/1032 & Fd/E6Map/18) 3 M & L For Repair To Almirah Large/Medium Steel By Taking Down/Removing The Existing Broken /Unserviceable Corner Cleat Carefully Without Disturbing The Adjoining Parts And Supply And Fixing Of New Corner Cleat Made Of 3 Mm Thick Ms Sheet Fixed To Almirah Steel With Cleats, Nuts & Bolts And Applying One Coat Of Synthetic Enamel Paint (1St Quality) Over A Coat Of Red Oxide Zinc Chrome Primer By Spraying Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-1031/1032 & Fd/E6Map/18) 4 M & L For Repairs To Bed Hard Plywood Top By Taking Down The Existing Broken /Unserviceable Wooden Long Rail And Replacing The Same With New Long Rail Of Size 1980X90X35Mm Made Of Well Seasoned First Class Teak Wood After Cutting, Made To Shape And Size As Required All As Shown On Drawing Complete All As Specified And Directed. (Drg No. Fd- 246/247) 5 M & L For Repairs To Bed Hard Plywood Top By Taking Down The Existing Broken /Unserviceable Plywood Top And Replacing The Same With New Top Of 12Mm Thick Plywood Bwr, Grade-Aa Of Size 1980Mm X 900Mm With 12 Nos Of 40Mm Long Countersunk Wood Screw, Made To Shape And Size As Required All As Shown On Drawing Complete All As Specified & Directed.(Drg No. Fd- 246/247). 6 M & L For Repairs To Bed Hard Plywood Top By Taking Down The Existing Broken /Unserviceable Plywood Top And Replacing The Same With New Top Of 12Mm Thick Plywood Bwr, Grade-Aa Of Size 1980Mm X 900Mm With 12 Nos Of 40Mm Long Countersunk Wood Screw, Made To Shape And Size As Required All As Shown On Drawing Complete All As Specified & Directed.(Drg No. Fd- E6/Map/08 (R)) 7 M & L For Repairs To Charpoy Gi Pipes By Taking Down The Existing Broken /Unserviceable Long Rail And Replacing The Same With New Long Rail Made Of 32Mm Bore Gi Pipe, Medium Grade, 1.98M Long, Made To Shape And Size And Threading Both End Upto 25Mm And Free For Elbow As Required Complete All As Shown On Drawing Complete All As Specified And Directed. (Drg No. Fd- 220) 8 Tm & L For Repairs To Charpoy Gi Pipes By Taking Down The Existing Broken /Unserviceable Short Rail And Replacing The Same With New Short Rail Made Out From Serviceable Portion Of Long Rail As Obtained From Abovem Item, 820Mm Long, Made To Shape And Size And Threading Both End Upto 25Mm And Free For Elbow As Required Complete All As Shown On Drawing Complete All As Specified And Directed. (Drg No. Fd- 220) 9 M & L For Repairs To Charpoy Gi Pipes By Taking Down The Existing Broken /Unserviceable Leg And Replacing The Same With New Leg Made Out From Serviceable Portion Of Long Rail As Obtained From Above Item, 380Mm Long, Made To Shape And Size And Threading Both End Upto 25Mm And Free For Elbow As Required Complete All As Shown On Drawing Complete All As Specified And Directed. (Drg No. Fd- 220) 10 M & L For Repairs To Charpoy Gi Pipes By Taking Down The Existing Broken /Unserviceable Check Nuts And Replacing The Same With Check Nut, Galvanised Iron, Suitable For 32Mm Bore Gi Pipe Complete All As Shown On Drawing Complete All As Specified And Directed. (Drg No. Fd- 220) 11 M & L For Repairs To Charpoy Gi Pipes By Taking Down The Existing Broken /Unserviceable 3-Way Elbow And Replacing The Same With 3-Way Elbow, Galvanised Iron, Suitable For 32Mm Bore Gi Pipe Complete All As Shown On Drawing Complete All As Specified And Directed. (Drg No. Fd- 220) 12 M & L For Repairs To Charpoy Gi Pipes By Taking Down The Existing Broken /Unserviceable Mild Steel Square Pipe As In Support For Top And Replacing The Same With Mild Steel Square Pipe Of Size 25X25X2.0Mm Thick, 900Mm Long Welded To Gi Pipe Complete All As Shown On Drawing Complete All As Specified And Directed.(Drg No. Fd- 220) 13 M & L For Repair To Charpoy Gi Pipe By Taking Down/Removing The Existing Broken /Unserviceable Plytop And S & F New Plytop Pf 12Mm Thick Plywood, Bwr Grade-Aa Of Size 1980X900Mm By Making Necessary Cutting At Edges Duly Fixed On Gi Pipe Frame With 6 Nos, 10Mm Dia Nuts, Ms Bolts, Nuts And Washer Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-220). 14 M & L For Repair To Charpoy Gi Pipe By Taking Down/Removing The Existing Broken /Unserviceable Plytop And S & F New Plytop Pf 12Mm Thick Plywood, Bwr Grade-Aa Of Size 1980X900Mm By Making Necessary Cutting At Edges Duly Fixed On Gi Pipe Frame With 6 Nos, 10Mm Dia Nuts, Ms Bolts, Nuts And Washer Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd/Map-Ii/01). 15 M & L For Repair To Chair Dining By Taking Down/Removing The Existing Broken /Unserviceable Front Leg Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Front Leg (Size 30X65X460Mm) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-279) 16 M & L For Repair To Chair Dining By Taking Down/Removing The Existing Broken /Unserviceable Rear Leg Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Rear Leg (Size 30X55X890Mm) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-279) 17 M & L For Repair To Chair Dining By Taking Down/Removing The Existing Broken /Unserviceable Front Rail Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Front Rail (Size 30X65X440Mm) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-279) 18 M & L For Repair To Chair Dining By Taking Down/Removing The Existing Broken /Unserviceable Rear Rail Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Rear Rail (Size 30X65X405Mm) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-279) 19 M & L For Repair To Chair Dining By Taking Down/Removing The Existing Broken /Unserviceable Seat Side Rail Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Seat Side Rail (Size 30X65X430Mm) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-279) 20 M & L For Repair To Chair Dining By Taking Down/Removing The Existing Broken /Unserviceable Side Stiffner Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of Newside Stiffner (Size 20X25X430Mm) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-279) 21 M & L For Repair To Chair Dining By Taking Down/Removing The Existing Broken /Unserviceable Pvc Seat Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Pvc Seat, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd/Map-Ii/05) 22 M & L For Repair To Chair Writing By Taking Down/Removing The Existing Broken /Unserviceable Front Leg Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Front Leg (Size 30X55X660Mm) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-280) 23 M & L For Repair To Chair Writing By Taking Down/Removing The Existing Broken /Unserviceable Rear Leg Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Rear Leg (Size 30X55X890Mm) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-280) 24 M & L For Repair To Chair Writing By Taking Down/Removing The Existing Broken /Unserviceable Front Rail Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Front Rail (Size 30X65X535Mm Including Drilling Holes @ 12.5Mm C/C For Canning) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed.(Drg No. Fd-280) 25 M & L For Repair To Chair Writing By Taking Down/Removing The Existing Broken /Unserviceable Rear Rail Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Rear Rail (Size 30X65X470Mm Including Drilling Holes @ 12.5Mm C/C For Canning) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-280) 26 M & L For Repair To Chair Writing By Taking Down/Removing The Existing Broken /Unserviceable Seat Side Rail Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Seat Side Rail (Size 30X65X535Mm Including Drilling Holes @ 12.5Mm C/C For Canning) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-280) 27 M & L For Repair To Chair Writing By Taking Down/Removing The Existing Broken /Unserviceable Arm Rest Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Arm Rest (Size 60X25X520Mm) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-280) 28 M & L For Repair To Chair Writing By Taking Down/Removing The Existing Broken /Unserviceable Side Stiffner Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Side Stiffner (Size 25X20X470Mm) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-280) 29 M & L For Repair To Chair Writing By Taking Down/Removing The Existing Broken /Unserviceable Centre Stiffner Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Centre Stiffner (Size 25X20X535Mm) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-280) 30 M & L For Repair To Chair Easy By Taking Down/Removing The Existing Broken /Unserviceable Front Leg Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Front Leg (Size 55X25X545Mm) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-229) 31 M & L For Repair To Chair Easy By Taking Down/Removing The Existing Broken /Unserviceable Rear Leg Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Rear Leg (Size 55X25X490Mm) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-229) 32 M & L For Repair To Chair Easy By Taking Down/Removing The Existing Broken /Unserviceable Seat Front Rail Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Seat Front Rail (Size 55X25X510Mm Including Drilling Holes @ 12.5Mm C/C For Canning) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-229) 33 M & L For Repair To Chair Easy By Taking Down/Removing The Existing Broken /Unserviceable Seat Rear Rail Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Seat Rear Rail (Size 50X25X480Mm Including Drilling Holes @ 12.5Mm C/C For Canning) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-229) 34 M & L For Repair To Chair Easy By Taking Down/Removing The Existing Broken /Unserviceable Seat Side Rail Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Seat Side Rail (Size 70X40X575Mm Including Drilling Holes @ 12.5Mm C/C For Canning) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-229) 35 M & L For Repair To Chair Easy By Taking Down/Removing The Existing Broken /Unserviceable Arm Rest Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Arm Rest (Size 65X25X610Mm) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-229) 36 M & L For Repair To Chair Easy By Taking Down/Removing The Existing Broken /Unserviceable Front/Back Base Stiffner Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Front/Back Base Stiffner (Size 55X25X510Mm) Made Of 1St Class Teak Wood Including Tightening The Joints, Pinning, Screwing, Nailing, Wedging Glueing, As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-229) 37 M & L For Repair To Chair Dining/Chair Writting By Taking Down/Removing The Existing Broken /Unserviceable Cane Plastic And Recanning The Chairs In True Godrej Pattern With 1St Quality Virgin Plastic Cane, 2Mm To 2.5Mm Wide, 0.50Mm Thick Of White Colour, The Border Of Seat / Back Shall Be Weaved With 4Mm Wide 1St Quality Virgin Plastic Cane As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-279, 280)(Note: The Caning Of Chairs Shall Be Carried Only After Finishing With Painting / Polishing All As Required At Site.) 38 M & L For Repair To Chair Easy Seat/ & Back By Taking Down/Removing The Existing Broken /Unserviceable Cane Plastic And Recanning The Chairs In True Godrej Pattern With 1St Quality Virgin Plastic Cane, 2Mm To 2.5Mm Wide, 0.50Mm Thick Of White Colour, The Border Of Seat Shall Be Weaved With 4Mm Wide 1St Quality Virgin Plastic Cane As Required With Standard Workmanship Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-229, 201, 17)(Note: The Caning Of Chairs Shall Be Carried Only After Finishing With Painting / Polishing All As Required At Site.) 39 M & L For Repair To Chair Verandah (Map) By Taking Down/Removing The Existing Broken /Unserviceable Seat & Back Carefully Without Disturbing The Adjoining Parts Supply And Fixing Of New Seat & Back Made Of Pvc 4Mm Thick, 4X10Mm Thick Ribs Moulded Alonwith Seat In Single Piece (As Per Approved Make) Screwed To Seat Rails Or Fix Over Additional Support Frame Duly Provided From Centre To Centre Complete All As Shown On Drawing And As Directed. (Drg No. Fd/E6/Map/06) 40 M & L For Repair To Peg Table By Taking Down The Existing Broken /Unserviceable Top And Supply And Fixing Of New Top As Per The Existing Size Made Out Of 18Mm Thick Prelaminated Mdf Board Exterior Grade As Per Existing Shade With Edges Duly Covered With 4 Mm Thick Beading Of Teak Wood Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-384) 41 M & L For Repairs To Table Centre Two Tier By Taking Down The Existing Broken /Unserviceable Top And Replacing The Same In Position With New Top Made Of 18Mm Thick Prelaminated Mdf Board, Exterior Grade Of Size 900Mm X 450Mm With 4Mm Thick Teak Wood Beading Alround Its Edges Duly Fixed With Suitable Wooden Screw All As Shown On Drawing, Complete All As Specified And Directed. (Drg No. Fd-274) 42 M & L For Repair To Teapoy Wooden By Taking Down The Existing Broken /Unserviceable Top And Supply And Fixing Of New Top Of Size 600Mmx450Mm Made Out Of 18Mm Thick Prelaminated Mdf Board Exterior Grade As Per Existing Shade With Edges Duly Covered With 4 Mm Thick Beading Of Teak Wood Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-278) 43 M & L For Repair To Table 3X2 With Drawer By Taking Down The Existing Broken /Unserviceable Top And Supply And Fixing Of New Top Of Size 900Mmx600Mm Made Out Of 18Mm Thick Prelaminated Mdf Board Exterior Grade As Per Existing Shade With Edges Duly Covered With 4 Mm Thick Beading Of Teak Wood. Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-283) 44 M & L For Repair To Table 3X2 Without Drawer By Taking Down The Existing Broken /Unserviceable Top And Supply And Fixing Of New Top Of Size 900Mmx600Mm Made Out Of 18Mm Thick Prelaminated Mdf Board Exterior Grade As Per Existing Shade With Edges Duly Covered With 4 Mm Thick Beading Of Teak Wood. Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-284) 45 M & L For Repair To Table Writing By Taking Down The Existing Broken /Unserviceable Top And Supply And Fixing Of New Top Of Size 1145Mmx600Mm Made Out Of 18Mm Thick Prelaminated Mdf Board Exterior Grade, Natural Teak Color, Edges Duly Covered With 4 Mm Thick Beading Of Teak Wood Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-275) 46 M & L For Repair To Table Dining For 6 Persons By Taking Down The Existing Broken /Unserviceable Leg And Supply And Fixing Of New Legs Of Size 760Mmx40Mmx75Mm Made Of 1St Class Teak Wood As Per Drg Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-273) 47 M & L For Repair To Table Dining For 6 Persons By Taking Down The Existing Broken /Unserviceable Top Short Rail And Supply And Fixing Of New Top Short Rail Of Size 900Mmx25Mmx100Mm Made Of 1St Class Teak Wood As Per Drg Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-273) 48 M & L For Repair To Table Dining For 6 Persons By Taking Down The Existing Broken /Unserviceable Corner Bracket And Supply And Fixing Of Corner Shape Wooden Bracket Of Size 100Mmx100Mmx25Mm Thick Shall Be Fixed To Legs And Rail With Adhesive And Screws Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-273) 49 M & L For Repair To Table Dining For 6 Persons By Taking Down The Existing Broken /Unserviceable Top Long Rail And Supply And Fixing Of New Top Long Rail Of Size 900Mmx25Mmx100Mm Made Of 1St Class Teak Wood As Per Drg Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-273) 50 M & L For Repair To Table Dining For 6 Persons By Taking Down The Existing Broken /Unserviceable Top And Supply And Fixing Of New Top Of Size 1500Mmx900Mm Made Out Of 18Mm Thick Prelaminated Mdf Board Exterior Grade, Natural Teak Color, Edges Duly Covered With 4 Mm Thick Beading Of Teak Wood Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-273) 51 M & L For Repair To Chair Steel Tubular With Arm By Taking Down/Removing The Existing Broken /Unserviceable Seat From The Frame Of Chair And Supply And Fix New Seat Frame Made Of 1St Class Teak Wood, Duly Polished In Natural Shade, Duly Plastic Canned In Godrej Pattern With 1St Quality Virgin Plastic Cane Not Less Than 2.0Mm To 2.5Mm Width And 0.4 Mm Thick And Borders With 4Mm Wide And 0.6 Mm Thick Plastic Cane And Fixed With Screws 4 Nos And Nut Bolts And Washers Of Length 60- 65Mm Length To Chair Frame Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-75(M)) 52 M & L For Repair To Chair Steel Tubular With Arm By Taking Down/Removing The Existing Broken /Unserviceable Back From The Frame Of Chair And Supply And Fix New Back Frame Made Of 1St Class Teak Wood, Duly Polished In Natural Shade, Duly Plastic Canned In Godrej Pattern With 1St Quality Virgin Plastic Cane Not Less Than 2.0Mm To 2.5Mm Width And 0.4 Mm Thick And Borders With 4Mm Wide And 0.6 Mm Thick Plastic Cane And Fixed With Screws 4 Nos And Nut Bolts And Washers Of Length 60- 65Mm Length To Chair Frame Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-75(M)) 53 M & L For Repair To Chair Steel Tubular With Arm By Taking Down/Removing The Existing Broken /Unserviceable Arm And Supply And Fix New Arm Made Of 1St Class Teak Wood, Duly Polished In Natural Shade Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-75(M)) 54 M & L For Repair To Chair Steel Tubular With Arm By Taking Down/Removing The Existing Broken /Unserviceable Rusted Mild Steel Flat From The Chair Carefully And S & F New Mild Steel Flat Of Size 25X4Mm, Wlded Beneath In Between The Width Of The Chair For Support Of Seat, Fixed By Proper Gas Welding Complete All As Per The Existing Specifications, Shown On Drawing And As Directed. (Drg No. Fd-75(M)) 55 M & L For Repair To Chair Steel Tubular With Arm By Painting Entire Frame Of The Chair With Two Coats Of Synthetic Enamel Paint Of Approved 1St Quality After Complete Removal Of Existing Paint And Preparation Of Steel Surface By Sanding With Sand Emery Paper And Dusting The Surface With Clean Cloth And Make Smooth By Applying Metal Putty Where Required Complete All As Directed By Engineer-In-Charge And As Specified. (Drg No. Fd-75(M)) 56 M & L For Repair To Table Office Officer Steel By Taking Down/Removing The Existing Broken /Unserviceable Top Carefully And Supply And Fixing New Top Of Size 1680Mmx870Mm Made Of 18Mm Thick Prelaminated Mdf Board Exterior Grade Both Side Laminated With Same Shade Duly Providing With 4Mm Thick Teak Wood Edging All Around, Fixed With Adhesive And Headless Nails Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-1003) 57 M & L For Repair To Table Office Officer Steel By Taking Down/Removing The Existing Broken /Unserviceable Drawer Complete Supply And Fixing New Drawer Made Of 1Mm Ms Sheet As Per The Existing Size And Dimension And Provided With 100 Mm Long Chrome Plated Handle Fixed At Front Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-1003) 58 M & L For Repair To Table Office Clerk Steel By Taking Down/Removing The Existing Broken /Unserviceable Top Carefully And Supply And Fixing New Top Of Size 1200Mmx610Mm Made Of 18Mm Thick Prelaminated Mdf Board Exterior Grade Both Side Laminated With Same Shade Duly Providing 4Mm Thick Teak Wood Edging All Around Fixed With Adhesive And Headless Nails Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-84(M)/1004) 59 M & L For Repair To Table Office Clerk Steel By Taking Down/Removing The Existing Broken /Unserviceable Lock From Shutter And Drawer Carefully Without Disturbing The Adjoining Parts, Supply And Fixing Of New 4 Lever Lock, Brass With Duplicate Keys Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-1004) 60 M & L For Repair To Table Office Clerk Steel By Taking Down/Removing The Existing Broken /Unserviceable Drawer Complete Supply And Fixing New Drawer Made Of 1Mm Ms Sheet As Per The Existing Size And Dimension And Provided With 100 Mm Long Chrome Plated Handle Fixed At Front Complete All As Specified, Shown On Drawing And As Directed. (Drg No. Fd-1004) 61 M & L For Repair To Sofa Five/Four/Three/Single Seater By Removing Broken Arm Of Sofa Chairs Carfeuly Without Damaging The Adjacent Parts, Supply And Fixing The New Arm Of Size 70X35X745Mm Made Of 1St Class Teak Wood Using Screw Complete All As Specified And As Shown On Drawing And As Directed. (Drg No. Fd-281) 62 M & L For Repair To Sofa Five/Four/Three/Single Seater By Removing Broken Legs Of Sofa Chairs Carfeuly Without Damaging The Adjacent Parts, Supply And Fixing The New Legs Of Size 70X35X515Mm Made Of 1St Class Teak Wood Using Screw Complete All As Specified And As Shown On Drawing And As Directed. (Drg No. Fd-281) 63 M & L For Repair To Sofa Single Seater By Removing Broken Bearer Of Sofa Seat/Back Carfeuly Without Damaging The Adjacent Parts, Supply And Fixing The New Bearer Of Size 40X40X530Mm Made Of 1St Class Teak Wood Using Screw Complete All As Specified And As Shown On Drawing And As Directed. (Drg No. Fd-281) 64 M & L For Repair To Sofa Single Seater By Removing Broken Front/Back Rail Of Sofa Carfeuly Without Damaging The Adjacent Parts, Supply And Fixing The New Front Rail Of Size 40X40X 570Mm Made Of 1St Class Teak Wood Using Screw Complete All As Specified And As Shown On Drawing And As Directed. (Drg No. Fd-281) 65 M & L For Repair To Sofa Single Seater By Removing Broken Side Rail Of Sofa Carfeuly Without Damaging The Adjacent Parts, Supply And Fixing The New Side Rail Of Size 100X35X625Mm Made Of 1St Class Teak Wood Using Screw Complete All As Specified And As Shown On Drawing And As Directed. (Drg No. Fd-281) 66 M & L For Repair To Sofa Single Seater By Taking Out Old Pressed /Torn Cushions From Each Set And Supply Of 40 Density,100Mm Thick Pu Foam Cushion Of Size 530Mmx560Mmx100Mm Duly Covered With Inner Linen Cloth And Best Tapestry Cloth Not Less Than Rs 200.00 Per Metre Of Approved Color And Shade. Each Cushion Cover Shall Be Provided With Best Quality Polyester Zipper Stitched On One Edge Of Cushion Cover Covered Under The Flap Of Cloth With Standard Fitting Complete All As Specified, Shown On Drawing And As Directed. (Note: Tapestry Cloth:- It Shall Be Heavy Linen Look Fabric, Plain Velvet Fabric Or As Per Approved Sample Placed In Bso Yard) (Drg No. Fd-281) 67 M & L For Repair To Sofa Single Seater By Taking Out Old Damaged Tapestry Cloths From Cushions From Each Set And Supply And Stritch Best Tapestry Cloth Not Less Than Rs 200.00 Per Metre Of Approved Color And Shade And Each Cushion Cover Shall Be Provided With Best Quality Polyester Zipper Stitched On One Edge Of Cushion Cover Covered Under The Flap Of Cloth With Standard Fitting Complete All As Specified, Shown On Drawing And As Directed. (Note: Tapestry Cloth:- It Shall Be Heavy Linen Look Fabric, Plain Velvet Fabric Or As Per Approved Sample Placed In Bso Yard) (Drg No. Fd-281) 68 M & L For Removing Denting And Making Good Bends (If Any), Re-Fixing Of Loose Shelves With Mild Steel Stay Hook (As Required), Preparing Old Painted/ Treated Both Internal & External Surfaces Of Almirah Large Steel By Removing Loose Paints And Providing Putty And Primer Where Required To Obtain A Smooth Surface And Applying A Coat Of Synthetic Enamel Paint (Ist Quality Smoke Grey Or Olive Green Colour As Ordered) With Spray Painting Machine Complete All As Specified And As Directed. (Drawing No. Fd-1031) 69 M & L For Removing Denting And Making Good Bends (If Any), Re-Fixing Of Loose Shelves With Mild Steel Stay Hook (As Required), Preparing Old Painted/ Treated Both Internal & External Surfaces Of Almirah Medium Steel By Removing Loose Paints And Providing Putty And Primer Where Required To Obtain A Smooth Surface And Applying A Coat Of Synthetic Enamel Paint (1St Quality Smoke Grey Or Olive Green Colour As Ordered) With Spray Painting Machine, Complete All As Specified And As Directed. (Drawing No. Fd-1032) 70 M & L For Removing Denting And Making Good Bends (If Any), Re-Fixing Of Loose Shelves With Mild Steel Stay Hook (As Required), Preparing Old Painted/ Treated Both Internal & External Surfaces Of Locker Bed Side Steel By Removing Loose Paints And Providing Putty And Primer Where Required To Obtain A Smooth Surface, Applying A Coat Of Synthetic Enamel Paint (Smoke Grey Or Olive Green Colour As Ordered) With Spray Painting Machine, Complete All As Specified And As Directed. (Drawing No. Fd-1029) 71 M & L For Removing Denting And Making Good Bends (If Any), Re-Fixing Of Loose Shelves With Mild Steel Stay Hook (As Required), Preparing Old Painted/ Treated Steel Surfaces Of Table Office Officer Steel By Removing Loose Paints And Providing Putty And Primer Where Required To Obtain A Smooth Surface, Applying A Coat Of Synthetic Enamel Paint (Smoke Grey Or Olive Green Colour As Ordered) With Spray Painting Machine, Complete All As Specified And As Directed. (Drg No. Fd-1003) 72 M & L For Removing Denting And Making Good Bends (If Any), Re-Fixing Of Loose Shelves With Mild Steel Stay Hook (As Required), Preparing Old Painted/ Treated Steel Surfaces Of Table Office Clerk Steel By Removing Loose Paints And Providing Putty And Primer Where Required To Obtain A Smooth Surface, Applying A Coat Of Synthetic Enamel Paint (Smoke Grey Or Olive Green Colour As Ordered) With Spray Painting Machine, Complete All As Specified And As Directed. (Drg No. Fd-1004) 73 Material And Labour For Polishing To Chair Dining By Adhering To Following Steps Complete All As Specified And As Shown On Drawing:-A) The Wooden Surfaces Shall Be Made Smooth By Sanding The Surface With Sand Paper Of About 120 Grit In The Direction Of Grains Of Wood.B) Repeat The Process With Progrssively Finner Grains With 180-220 Grit Sanding Paper To Make The Surface More Finer.C) Wipe Out The Surface And Remove The Dust With A Fine Cloth.D) Examine The Surface And Fill Yellow Oxide Or Wood Filler/Putty In The Holes And Sand The Surface Again To Achieve A Smooth And Cleaner Surface.E) Wipe It Again With Cloth And Apply A Coat Of French Polish And Let It Dry.F) Sand The Surface Again And Apply Next Coat With A Soft Brush Or Cloth.G) Let The Surface Dry Completely And Apply A Clear Coat French Polish Over It For Glossy Finish Surface.(Note: The Work Will Be Excecuted At Various Units Locations/Residential Accn Or Inside/Outside Restricted Area As Per The User Requirement) (Drg No. Fd-279) 74 All As Per Serial Item No. 71 Above But For Chair Writing Complete Ditto (Drg No. Fd-280) 75 All As Per Serial Item No. 71 Above But For Chair Easy Complete Ditto. (Drg No. Fd-229) 76 All As Per Serial Item No. 71 Above But For Table Peg Complete Ditto. (Drg No. Fd-384) 77 All As Per Serial Item No. 71 Above But For Table Centre 2 Tier Complete Ditto. (Drg No. Fd-393)
|
