Request for Proposal For Restaurant & Security Room in Somalia

Work Detail

Request for proposals for Restaurant & Security Room 5.1 EARTHWORKS & EXCAVATION 5.1.1 Excavate oversite to remove loose coastal sand, topsoil, and organic roots to an average depth of 150mm. m3 5.439 5.1.2 Excavate trenches for strip foundation footings, width 600mm, depth 1.2m below stripped ground level. m3 29.952 5.1.3 Provide, lay, and compact approved granular hardcore material in 150mm layers under ground slabs. m3 5.439 5.1.4 Apply anti-termite chemical emulsion treatment to surface of compacted hardcore and excavation trench walls. m2 39.1 5.2 SUBSTRUCTURE CONCRETE WORKS & PROTECTION (SRPC) 5.2.1 50mm thick mass concrete blinding (Class 15/20) under strip footings. m3 1.248 5.2.2 Reinforced concrete Class 25/30 using Sulfate-Resisting Portland Cement (SRPC) in strip footings (600mm x 300mm). m3 7.488 5.2.3 Reinforced concrete Class 25/30 using SRPC in ground beams (200mm x 400mm) and 150mm thick ground floor slabs. m3 12.146 5.2.4 High-yield deformed steel bar reinforcement (Grade 460) to footings and ground structural frames. kg 1,420.00 5.2.5 Fabric reinforcement mesh (Ref. A142) embedded in restaurant and security floor slabs with 200mm overlaps. m2 39.1 5.2.6 Apply two coats of bitumen-based chloride/water-resistant emulsion protection to all buried concrete surfaces. m2 48.8 5.3 SUPERSTRUCTURE WALLING 5.3.1 Precast solid concrete block walling (200mm thick) bedded and jointed in cement-sand mortar (1:3) for external perimeter shells. m2 131.6 5.3.2 Precast solid concrete block walling (150mm thick) in cement-sand mortar (1:3) for internal kitchen, counter, and partition zones. m2 14 5.4 SUPERSTRUCTURE REINFORCED CONCRETE 5.4.1 Reinforced concrete Class 25/30 incorporating chloride-inhibiting admixtures for tie/ring beams (200mm x 300mm) and framing columns. m3 3.12 5.4.2 Sawn timber formwork/shuttering to vertical and horizontal faces of superstructure beams and columns. m2 29.6 5.4.3 High-yield deformed steel reinforcing bars (Grade 460) for superstructure column and beam skeletons. kg 342 5.5 ROOFING & CEILING SYSTEMS 5.5.1 Marine-grade treated timber roof structure including engineered trusses, purlins, and wall plates fixed to beams. m2 47.138 5.5.2 Gauge 28 Pre-painted Aluzinc (PPGL) corrugated roof sheeting with marine-grade PVDF coating, fixed to timber purlins with corrosion-resistant EPDM-washered roofing screws, all in accordance with Technical Specification. m2 47.138 5.5.3 600x600mm False Ceiling Tiles (Moisture-resistant, cleanable commercial grade) on an anti-corrosive aluminum T-grid system. m2 36.6 5.6 WINDOWS, DOORS & OPENINGS 5.6.1 Powder-coated Aluminum sliding windows (60-micron marine finish) with 6mm thick tinted glass and integrated fly-screens. m2 14.4 5.6.2 Heavy-duty commercial glass entrance doors with marine aluminum frames for main restaurant access. No. 1 5.6.3 Single-leaf semi-solid core flush wooden doors for the security office and kitchen storage zones. No. 2 5.6.4 Heavy-duty uPVC water-resistant flush doors for sanitary facilities. No. 1 5.6.5 Grade 316 Stainless Steel architectural ironmongery kits (heavy-duty hinges, handles, locks, door stops). Item 1 5.7 FINISHES & ARCHITECTURAL COATINGS 5.7.1 12mm thick internal cement-sand plastering (1:4) to masonry and concrete block surfaces, finished smooth. m2 246 5.7.2 15mm thick external render (1:3) applied to blockwork structures, finished with a rugged wood float texture. m2 84.2 5.7.3 Glazed ceramic wall tiles (minimum 200x300mm) up to 2.1m height in the kitchen preparation area and W.C. spaces. m2 34.2 5.7.4 Non-slip homogeneous ceramic floor tiles bedded in cement mortar, finished with durable epoxy tile grout. m2 36.26 5.7.5 Premium weather-resistant, anti-fungal exterior emulsion paint applied in 3 coats. m2 84.2 5.7.6 Washable, durable vinyl silk interior emulsion paint applied in 3 coats across dining and office layouts. m2 211.8 5.8 MEP & SANITARY INFRASTRUCTURE 5.8.1 Ceramic water closet (W.C.) suites complete with flushing apparatus and marine-grade sub-surface pipe lines. No. 1 5.8.2 Deep-bowl stainless steel kitchen catering sinks and standard wash hand basins (WHB) complete with tap infrastructure. No. 3 Tender Link : https://somalijobs.com/tenders

Contact Information