Tenders Are Invited For Renovation (Modernization) Of The Roof Covering And Renovation Of The Sanitary And C ... in Poland

Work Detail

Part I - Renovation Of The Roof Covering Of The Sports Hall 1) The Intention Includes The Replacement Of The Existing Roof Covering Of The Sports Hall, I.E.: Disassembly And Demolition Works● Disassembly Of The Existing Lightning Protection Installation,● Dismantling Of Roof Equipment Elements Such As Snow Fences,● Dismantling Of Gutters And Sheet Metal Flashings,● Dismantling Of Trapezoidal Sheets From The Attic,● Dismantling Of Roofing Panels Polycarbonate Above The Entrance To The Hall. Replacement Of The Roof Covering ● Placing Steel Angles Along The Gable Walls For The Installation Of Wind Girders With A Height Of Min. Thickness Of Thermal Insulation, ● Repair Of Roof Coverings With Heat-Sealable Felt, One-Time Covering Of The Top Covering With Felt, ● Laying A Spacer On The Existing Covering With Sv 300 Membrane - On The Roof Of The Sports Hall, ● Covering With A Welded Fpo Roof Membrane, Min. 1.8 Mm Thick. Anchors At Least 4 Pcs. Per M2 - On The Roof Of The Sports Hall, Replacement Of Gutters, Installation Of A New Gutter On The Buildings Roof After Dismantling The Existing One. Coated Steel Gutter, Made Of Thick Sheet Metal. 0.6Mm. Drawn With A Rectangular Cross-Section. Installation Of Gutters In Eaves To The Fascia Board. Lay The Gutters With A Slope Of 1%. Replacement Of The Lightning Protection System, Installation Of A New Lightning Protection System Along The Existing Routes In The Air Terminals Of The Lightning Protection System, With The Implementation Of Control Joints. Execution Of Sheet Metal Workings, Execution Of New Sheet Metal Workings From Thick Steel Sheets. 0.6Mm. Gutter Belt And Wind Girders Of Gable Walls. Renovation Of Chimneys. Renovation Of Chimneys, Construction Of New Flanges And Chimney Caps From Coated Steel Sheets2) A Detailed Description Of The Subject Of The Order Is Included In The Design Documentation, Technical Specification For The Execution And Acceptance Of Works, Bill Of Quantities - Constituting Annex No. 2 To This Swz. 3) The Bill Of Quantities Is For Illustrative Purposes Only. 4) Works Not Specified In The Design Documentation And/Or The Bill Of Quantities, But Necessary And Indispensable For The Execution Of The Subject Of The Order, Shall Be Performed By The Contractor As Part Of The Remuneration Specified In The Contract. 5) The Drawings And The Descriptive Part Are Mutually Complementary Documents. All Elements Included In The Description And Not Included In The Drawings Or Included In The Drawings But Not Included In The Description Should Be Treated As If They Were Included In Both.6) The Contractor Is Obliged To Secure The Construction Site During The Duration And Execution Of The Order Until The Completion And Final Acceptance Of The Works.7) Construction Works Should Be Performed Within The Time Agreed With The Ordering Party And In A Way That Limits Their Inconvenience To The Ordering Party To A Minimum. The Contractor Should Ensure Special Safety For People Working And Staying In The Fac

Contact Information