Bids Are invited for Repair And Overhauling Service - Rc For Repair Overhauling Of Electrical Boat Davit For ... in India

Work Detail

Bids Are invited for Repair And Overhauling Service - Rc For Repair Overhauling Of Electrical Boat Davit For In Ships; Any Other Suitable Brand; Yes; Buyer Premises - Corvette Class.Whole Single Arm Boat Davit: Degutting/ Regutting Of Entire Davit From/ To Foundation, Separation/ Detachment Arm And Vertical Column, De-Coupling Of Motors And Gear Boxes And Dismantling Of Its Sub-Assemblies: While Re-Gutting The Davit Suitable Ht Bolts May Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation: , Corvette Class.Whole Single Arm Boat Davit: Hydro Blasting Of Entire Davit Structure And Sub-Assemblies (To Hpps) To Remove Paint And Arrive At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes And Repair As Per Survey Reports: , Corvette Class.Whole Single Arm Boat Davit: Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required:In Case Of Repair Of Gearbox Housing, Trueness And Alignment Of Drive And Driven Shaft Also Be Undertaken , Corvette Class.Luffing Gear Box: Dismantling, Defect Identification And Overhauling Of Luffing Gear Box: Which Includes Replacement Of Worn-Out / Damaged Bearings, Screw Shaft, Gears, Pinions, Shafts Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals,Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators, Oil Drain Plug And Fasteners:Ensure For No Oil Lekage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Repair Accordingly: Qc To Be Offeref Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails (Which Includes Load Trails) , Corvette Class.Hoisting/Lowering Gear Box And Its Winch: Dismantling, Defect Identification And Overhauling Of Hoisting/Lowering Gear Box And Its Winch: Which Includes Replacement Of Worn Out/ Damaged Bearings, Gears, Pinions, Shafts, Bearing End Covers, Inspection Covers,Bushes, Circlips, Oil Seals, Washers/ Spring Washers/ Thrust Washers, Deadman Weight/Counter Weight, Oil Level Indicators, Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage ,Repair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Corvette Class.Slewing Arrangement & Slewing Gear Box: Dismantling, Defect Identifiaction And Overhauling Of Slewing Gear Box: Which Includes Replacement Of Worn Out / Damages Bearings, Gears, Slewing Ring Gear (If Installed), Pinions, Shafts, Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals, Cylindrical Rollers, Worn Wheel & Worm Shaft, Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators , Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Reapair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Corvette Class.Clutch Cum Coupling, Centrifugal Brake Unit,Engaging And Dis-Engaging Mechanism & Manual Hand Operation: Dismantling, Defect Identification And Overhauling Of Clutch Cum Coupling, Centrifugal Brake Unit, Engaging And Dis-Engaging Mechanism: Which Includes Replacement/Repair Of Clutch Plates: Qc To Be Offered Before And After Assembly: , Corvette Class.Charge Oil In Gear Boxes With Servo Gear Oil 140 Or As Specified In The Oem Manual:Charge Grease Into Grease Nipples:Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Corvette Class.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Corvette Class.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Corvette Class.After Completion Of Load Test, Re-Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: If Any Flaws Observed Those Flaws Must Be Examined By Ndt Techniques And Accordingly Carry Out Repairs As Necessary And Reoffer To Load Testing Like Wise: , Lst Class.Whole Single Arm Boat Davit: Degutting/ Regutting Of Entire Davit From/ To Foundation, Separation/ Detachment Arm And Vertical Column, De-Coupling Of Motors And Gear Boxes And Dismantling Of Its Sub-Assemblies: While Re-Gutting The Davit Suitable Ht Bolts May Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation: , Lst Class.Whole Single Arm Boat Davit: Hydro Blasting Of Entire Davit Structure And Sub-Assemblies (To Hpps) To Remove Paint And Arrive At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes And Repair As Per Survey Reports: , Lst Class.Whole Single Arm Boat Davit:Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required:In Case Of Repair Of Gearbox Housing, Trueness And Alignment Of Drive And Driven Shaft Also Be Undertaken: , Lst Class.Hoisting/Lowering Gear Box And Its Winch: Dismantling, Defect Identification And Overhauling Of Hoisting/Lowering Gear Box And Its Winch: Which Includes Replacement Of Worn Out/ Damaged Bearings, Gears, Pinions, Shafts, Bearing End Covers, Inspection Covers,Bushes, Circlips, Oil Seals, Washers/ Spring Washers/ Thrust Washers, Deadman Weight/Counter Weight, Oil Level Indicators, Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage ,Repair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Lst Class.Slewing Arrangement & Slewing Gear Box: Dismantling, Defect Identifiaction And Overhauling Of Slewing Gear Box: Which Includes Replacement Of Worn Out / Damages Bearings, Gears, Slewing Ring Gear (If Installed), Pinions, Shafts, Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals, Cylindrical Rollers, Worn Wheel & Worm Shaft, Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators , Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Reapair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Lst Class.Clutch Cum Coupling, Centrifugal Brake Unit,Engaging And Dis-Engaging Mechanism : Dismantling, Defect Identification And Overhauling Of Clutch Cum Coupling, Centrifugal Brake Unit, Engaging And Dis-Engaging Mechanism: Which Includes Replacement/Repair Of Clutch Plates: Qc To Be Offered Before And After Assembly: , Lst Class.Charge Oil In Gear Boxes With Servo Gear Oil 140 Or As Specified In The Oem Manual:Charge Grease Into Grease Nipples:Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Lst Class.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Lst Class.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Lst Class.After Completion Of Load Test, Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: Suspectd Flaws Must Be Examined By Ndt Techniques: Carry Out Repairs As Necessary And Retesting Like Wise: , Delhi Class.Whole Single Arm Boat Davit: Degutting/ Regutting Of Entire Davit From/ To Foundation, Separation/ Detachment Arm And Vertical Column, De-Coupling Of Motors And Gear Boxes And Dismantling Of Its Sub-Assemblies: While Re-Gutting The Davit Suitable Ht Bolts May Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation: , Delhi Class.Whole Single Arm Boat Davit: Hydro Blasting Of Entire Davit Structure And Sub-Assemblies (To Hpps) To Remove Paint And Arrive At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes And Repair As Per Survey Reports: , Delhi Class.Whole Single Arm Boat Davit:Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required:In Case Of Repair Of Gearbox Housing, Trueness And Alignment Of Drive And Driven Shaft Also Be Undertaken: , Delhi Class.Hoisting/Lowering Gear Box And Its Winch: Dismantling, Defect Identification And Overhauling Of Hoisting/Lowering Gear Box And Its Winch: Which Includes Replacement Of Worn Out/ Damaged Bearings, Gears, Pinions, Shafts, Bearing End Covers, Inspection Covers,Bushes, Circlips, Oil Seals, Washers/ Spring Washers/ Thrust Washers, Deadman Weight/Counter Weight, Oil Level Indicators, Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage ,Repair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Delhi Class.Slewing Gear Box: Dismantling, Defect Identifiaction And Overhauling Of Slewing Gear Box: Which Includes Replacement Of Worn Out / Damages Bearings, Gears, Slewing Ring Gear (If Installed), Pinions, Shafts, Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals, Cylindrical Rollers, Worn Wheel & Worm Shaft, Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators , Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Reapair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Delhi Class.Clutch Cum Coupling, Centrifugal Brake Unit,Engaging And Dis-Engaging Mechanism : Dismantling, Defect Identification And Overhauling Of Clutch Cum Coupling, Centrifugal Brake Unit, Engaging And Dis-Engaging Mechanism: Which Includes Replacement/Repair Of Clutch Plates: Qc To Be Offered Before And After Assembly: , Delhi Class.Charge Oil In Gear Boxes With Servo Gear Oil 140 Or As Specified In The Oem Manual:Charge Grease Into Grease Nipples:Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Delhi Class.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Delhi Class.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Delhi Class.After Completion Of Load Test, Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: Suspectd Flaws Must Be Examined By Ndt Techniques: Carry Out Repairs As Necessary And Reoffer To Load Testing Like Wise: , Opv Class.Degutting/ Regutting Of The Davit Gear Box From/ To Foudation And Dismantling Of Davit Gear Box For Survey Or Inspection And Gauging Of Its Parts:While Regutting The Davit Suitable Ht Bolts Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation , Opv Class.Hydro Blasting Of Entire Gear Box Structure And Sub-Assemblies (To Hpps) To Remove Paint And Arrive At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes And Repair As Per Survey Reports: , Opv Class.Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required:In Case Of Repair Of Gearbox Housing, Trueness And Alignment Of Drive And Driven Shaft Also Be Undertaken: , Opv Class.Reduction Gear Box: Dismantling, Defect Identifiaction And Overhauling Of Luffing Gear Box: Which Includes Replacement Of Worn Out / Damages Bearings, Screws Shaft, Gears, Pinions, Shafts, Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals, Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators , Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Reapair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Opv Class.Charge Oil In Gear Boxes With Servo Gear Oil 140: Charge Grease Into Grease Nipples:Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Opv Class.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Opv Class.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Opv Class.After Completion Of Load Test, Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: Suspectd Flaws Must Be Examined By Ndt Techniques: Carry Out Repairs As Necessary And Retest , Bangaram Class.Whole Single Arm Boat Davit: Degutting/ Regutting Of Entire Davit From/ To Foundation, Separation/ Detachment Arm And Vertical Column, De-Coupling Of Motors And Gear Boxes And Dismantling Of Its Sub-Assemblies: While Re-Gutting The Davit Suitable Ht Bolts May Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation: , Bangaram Class.Whole Single Arm Boat Davit: Hydro Blasting Of Entire Davit Structure And Sub-Assemblies (To Hpps) To Remove Paint And Arrive At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes And Repair As Per Survey Reports: , Bangaram Class.Whole Single Arm Boat Davit:Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required:In Case Of Repair Of Gearbox Housing, Trueness And Alignment Of Drive And Driven Shaft Also Be Undertaken: , Bangaram Class.Hoisting/Lowering Gear Box And Its Winch: Dismantling, Defect Identification And Overhauling Of Hoisting/Lowering Gear Box And Its Winch: Which Includes Replacement Of Worn Out/ Damaged Bearings, Gears, Pinions, Shafts, Bearing End Covers, Inspection Covers,Bushes, Circlips, Oil Seals, Washers/ Spring Washers/ Thrust Washers, Deadman Weight/Counter Weight, Oil Level Indicators, Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage ,Repair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Bangaram Class.Slewing Arrangement & Slewing Gear Box: Dismantling, Defect Identifiaction And Overhauling Of Slewing Gear Box: Which Includes Replacement Of Worn Out / Damages Bearings, Gears, Slewing Ring Gear (If Installed), Pinions, Shafts, Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals, Cylindrical Rollers, Worn Wheel & Worm Shaft, Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators , Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Reapair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Bangaram Class.Clutch Cum Coupling, Centrifugal Brake Unit,Engaging And Dis-Engaging Mechanism & Manual Hand Operation: Dismantling, Defect Identification And Overhauling Of Clutch Cum Coupling, Centrifugal Brake Unit, Engaging And Dis-Engaging Mechanism: Which Includes Replacement/Repair Of Clutch Plates: Qc To Be Offered Before And After Assembly: , Bangaram Class.Charge Oil In Gear Boxes With Servo Gear Oil 140 Or As Specified In The Oem Manual:Charge Grease Into Grease Nipples:Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Bangaram Class.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Bangaram Class.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Bangaram Class.After Completion Of Load Test, Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: Suspectd Flaws Must Be Examined By Ndt Techniques: Carry Out Repairs As Necessary And Retesting Like Wise: , Ammunition/Gemini Davit.Degutting/ Regutting Of Theammunition/Gemini Davit From/ To Foudation And Dismantling Of Davit For Survey Or Inspection And Gauging Of Its Parts: While Re Gutting The Davit Suitable Ht Bolts Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation: , Ammunition/Gemini Davit.Hydro Blasting / Sand Blasting Of Entire Davit Structure And Sub-Assemblies To Remove Paint And Attain At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes Etc , Ammunition/Gemini Davit.Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required: , Ammunition/Gemini Davit.Gear Box : Dismantling, Defect Identification, And Overhauling Of Gear Box And Ratchet Mechanism, Operating Handle End Pulleys/Guiding Pulleys, Springs And Its Bush Bearings All Gears / Sector Gears, Springs Operating Handle, Pulleys To Be Cleaned From Rust And Inspected Same To Be Replaced/ Renewed If Necessary: Qc To Be Offerd Before And After Assembly: , Ammunition/Gemini Davit.Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Ammunition/Gemini Davit.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Ammunition/Gemini Davit.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Ammunition/Gemini Davit.After Completion Of Load Test, Re- Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: If Any Flaws Observed Those Flaws Must Be Examined By Ndt Techniques And Accordingly Carry Out Repairs As Necessary And Reoffer Tp Load Testing Like Wise: , Mandatory Spares.Corvet Class.7481240.Oil Level Indicator , Mandatory Spares.Corvet Class.7481250.Drain Plug , Mandatory Spares.Corvet Class.7481270.Worm Shaft , Mandatory Spares.Corvet Class.7481271.Key , Mandatory Spares.Corvet Class.7481280.Taper Roller Bearing , Mandatory Spares.Corvet Class.7481315.Oil Seal , Mandatory Spares.Corvet Class.7481340.Worm Wheel , Mandatory Spares.Corvet Class.7481370.Worm Shaft , Mandatory Spares.Corvet Class.7481380.Taper Roller Bearing , Mandatory Spares.Corvet Class.7481430.Worm Wheel , Mandatory Spares.Corvet Class.7481450.Main Shaft , Mandatory Spares.Corvet Class.7481460.Ball Bearing , Mandatory Spares.Corvet Class.7481485.Oil Seal , Mandatory Spares.Corvet Class.7481511.Allen Bolt , Mandatory Spares.Corvet Class.7482220.Coupling , Mandatory Spares.Corvet Class.748235.Oil Seal , Mandatory Spares.Corvet Class.7482350.Oil Level Indicator , Mandatory Spares.Corvet Class.7482370.Worm Shaft , Mandatory Spares.Corvet Class.7482380.Taper Roller Bearing , Mandatory Spares.Corvet Class.7482435.Oil Seal , Mandatory Spares.Corvet Class.7482460.Worm Wheel , Mandatory Spares.Corvet Class.7482470.Worm Shaft , Mandatory Spares.Corvet Class.7482480.Taper Roller Bearing , Mandatory Spares.Corvet Class.7482540.Bearing , Mandatory Spares.Corvet Class.7482560.Main Shaft , Mandatory Spares.Corvet Class.7482610.Pinion , Mandatory Spares.Corvet Class.7482752.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7483290.Oil Level Indicator , Mandatory Spares.Corvet Class.7483300.Drain Plug , Mandatory Spares.Corvet Class.7483320.Worm Shaft , Mandatory Spares.Corvet Class.7483330.Taper Roller Bearing , Mandatory Spares.Corvet Class.7483352.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7483361.Packing , Mandatory Spares.Corvet Class.7483362.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7483365.Oil Level Indicator , Mandatory Spares.Corvet Class.7483390.Worm Wheel , Mandatory Spares.Corvet Class.7483420.Worm Shaft , Mandatory Spares.Corvet Class.7483430.Taper Roller Bearing , Mandatory Spares.Corvet Class.7486480.Worm Wheel , Mandatory Spares.Corvet Class.7483500.Main Shaft , Mandatory Spares.Corvet Class.7483510.Ball Bearing , Mandatory Spares.Corvet Class.7483535.Oil Seal , Mandatory Spares.Corvet Class.7483625.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7484201.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7484240.Slewing Ring , Mandatory Spares.Corvet Class.7485201.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7485260.Bush Bearing , Mandatory Spares.Corvet Class.7485305.Grease Nipple , Mandatory Spares.Corvet Class.7485350.Bush Bearing , Mandatory Spares.Corvet Class.7485360.Thrust Washer , Mandatory Spares.Corvet Class.7485531.Grease Nipple , Mandatory Spares.Corvet Class.7485720.Sheave , Mandatory Spares.Corvet Class.7485730.Bush Bearing , Mandatory Spares.Corvet Class.7485751.Grease Nipple , Mandatory Spares.Corvet Class.Hew/P-302/Emb-Size 18/9.Spring Washer For Brake Mounting Screw , Mandatory Spares.Corvet Class.7483500A.Screw Shaft , Mandatory Spares.Lst Class.Gew040661754262280.Adapter For Oil Level Indicator , Mandatory Spares.Lst Class.Gew040661754262284.Oil Level Indicator , Mandatory Spares.Lst Class.Gew040661754262290.Adaptor For Drain Plug , Mandatory Spares.Lst Class.Gew040661754262295.Drain Plug , Mandatory Spares.Lst Class.Gew040661754262340.Reduction Gear Wheel , Mandatory Spares.Lst Class.Gew040661754262350.Taper Roller Bearing , Mandatory Spares.Lst Class.Gew040661754262360.Bearing Housing Cover , Mandatory Spares.Lst Class.Gew040661754262365.Oil Seal , Mandatory Spares.Lst Class.Gew040661754262410.1St Reduction Gear Wheel , Mandatory Spares.Lst Class.Gew040661754262420.Pimion Shaft , Mandatory Spares.Lst Class.Gew040661754262440.Ball Bearing - 6214 , Mandatory Spares.Lst Class.Gew040661754262452.Hex:Bolt & Sp:Washer , Mandatory Spares.Lst Class.Gew040661754262462.Hex:Bolt & Sp:Washer , Mandatory Spares.Lst Class.Gew040661754262480.Main Shaft , Mandatory Spares.Lst Class.Gew040661754262510.Ball Bearing - 6217 , Mandatory Spares.Lst Class.Gew040661754262522.Hex:Bolt & Sp:Washer , Mandatory Spares.Lst Class.Gew040661754262540.Pinion , Mandatory Spares.Lst Class.Gew040661754262550.2Nd Reduction Gear Wheel , Mandatory Spares.Lst Class.Gew040661754262551.Hex:Bolt & Sp:Washer , Mandatory Spares.Lst Class.Gew040661754262581.Allen Bolt & Sp Washer , Mandatory Spares.Lst Class.Gew040661754262600.Idler Gear , Mandatory Spares.Lst Class.Gew040661754262610.Ball Bearing 6212 - 2Rs1 , Mandatory Spares.Lst Class.Gew040661754262630.Shaft For Idle Gear , Mandatory Spares.Lst Class.Gew040661754262681.Allen Bolt & Sp Washer , Mandatory Spares.Lst Class.Gew040661754262682.Allen Bolt & Sp Washer , Mandatory Spares.Lst Class.Gew040661754261330.Ball Bearing , Mandatory Spares.Lst Class.Gew040661754261360.Dog Clutch , Mandatory Spares.Lst Class.Gew040661754261370.Shifter Ring In Hlaves , Mandatory Spares.Lst Class.Gew040661754261385.Hex:Bolt Nut & Sp:Washer , Mandatory Spares.Lst Class.Gew040661754261390.Clutch Engaging Dis Engaging Lever , Mandatory Spares.Lst Class.Gew040661754261400.Bush Bearing , Mandatory Spares.Lst Class.Gew040661754261412.Hex: Bolt & Sp: Washer , Mandatory Spares.Lst Class.Gew040661754261421.Hex: Bolt & Sp: Washer , Mandatory Spares.Lst Class.Gew040661754261460.Pinion Shaft , Mandatory Spares.Lst Class.Gew040661754261461.Grease Nipple , Mandatory Spares.Lst Class.Gew040661754261483.Oil Seal 80 X 100 X 10 , Mandatory Spares.Lst Class.Gew040661754261490.Ball Bearing Sealed 6212-2Rs1 , Mandatory Spares.Lst Class.Gew040661754261500.Brake Disc , Mandatory Spares.Lst Class.Gew040661754261501.Key , Mandatory Spares.Lst Class.Gew040661754261502.Circlip External , Mandatory Spares.Lst Class.Gew040661754261526.Rivet , Mandatory Spares.Lst Class.Gew040661754261530.Spring , Mandatory Spares.Lst Class.Gew040661754261540.Eccentric , Mandatory Spares.Lst Class.Gew040661754261541.Oil Seal 50 X 65 X 7 , Mandatory Spares.Lst Class.Gew040661754261562.Hex: Bolt & Sp: Washer , Mandatory Spares.Lst Class.Gew040661754261595.Lining , Mandatory Spares.Lst Class.Gew040661754261596.Rivet , Mandatory Spares.Lst Class.Gew040661754261630.Dead Man Brake , Mandatory Spares.Lst Class.Gew040661754261660.Pinion Shaft , Mandatory Spares.Lst Class.Gew040661754261671.Key , Mandatory Spares.Lst Class.Gew040661754261680.Ball Bearing 6212 , Mandatory Spares.Lst Class.Gew040661754261685.Ball Bearing 6213 , Mandatory Spares.Lst Class.Gew040661754261692.Csk Screw , Mandatory Spares.Lst Class.Gew040661754261740.Ball Bearing 6224 , Mandatory Spares.Lst Class.Gew040661754261765.Oil Seal 120 X 150 X 12 , Mandatory Spares.Lst Class.Gew040661754261772.Hex: Bolt & Sp: Washer , Mandatory Spares.Lst Class.Gew040661754261795.Rope Cl , Mandatory Spares.Lst Class.Gew040661754261796.Allen Bolt & Sp Washer , Mandatory Spares.Lst Class.Gew040661754261801.Hex Bolt & Sp: Washer , Mandatory Spares.Lst Class.Gew040661754261495.O Ring , Mandatory Spares.Lst Class.Gew040661754261506.Csk Screw , Mandatory Spares.Delhi Class.7351510.Eccentric , Mandatory Spares.Delhi Class.7353340.Bush Bearing , Mandatory Spares.Delhi Class.7352320.Taper Roller Bearing , Mandatory Spares.Delhi Class.7351255.Ball Bearing , Mandatory Spares.Delhi Class.7351290.Ball Bearing , Mandatory Spares.Delhi Class.7351300.Ball Bearing , Mandatory Spares.Delhi Class.7352620.Ball Bearing , Mandatory Spares.Delhi Class.7352630.Ball Bearing , Mandatory Spares.Delhi Class.7352420.Ball Bearing , Mandatory Spares.Delhi Class.7351650.Ball Bearing , Mandatory Spares.Delhi Class.7351655.Ball Bearing , Mandatory Spares.Delhi Class.7351710.Ball Bearing , Mandatory Spares.Delhi Class.7351496.Rivet , Mandatory Spares.Delhi Class.7351566.Rivet , Mandatory Spares.Delhi Class.7351495.Brake Lining , Mandatory Spares.Delhi Class.7351565.Brake Lining , Mandatory Spares.Delhi Class.7351490.Brake Shoe , Mandatory Spares.Delhi Class.7351385.Oil Seal , Mandatory Spares.Delhi Class.7351452.Oil Seal , Mandatory Spares.Delhi Class.7351511.Oil Seal , Mandatory Spares.Delhi Class.7351735.Oil Seal , Mandatory Spares.Delhi Class.7352475.Oil Seal , Mandatory Spares.Delhi Class.7351330.Clutch , Mandatory Spares.Delhi Class.7351766.Allen Bolts + Washers , Mandatory Spares.Delhi Class.7352711.Allen Bolts + Washers , Mandatory Spares.Delhi Class.7351742.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351212.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351732.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351331.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351382.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7352713.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7352752.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351201.Hex Bolt + Nut + Sp: Washer , Mandatory Spares.Delhi Class.7351102.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351431.Graese Nipples , Mandatory Spares.Delhi Class.7352710.Slewing Bearing , Mandatory Spares.Delhi Class.7352670.Pinion , Mandatory Spares.Delhi Class.7351225.Oil Level Indicator , Mandatory Spares.Delhi Class.7351230.Drain Plug , Mandatory Spares.Opv Class.1754262280-1.Adaptor For Oil Level Indicator , Mandatory Spares.Opv Class.1754262280-2.Oil Level Indicator , Mandatory Spares.Opv Class.1754262280-3.Adaptor For Drain Plug , Mandatory Spares.Opv Class.1754262280-4.Drain Plug , Mandatory Spares.Opv Class.1754262280-5.Pinoin Shaft , Mandatory Spares.Opv Class.1754262280-6.Tapper Roller Bearing , Mandatory Spares.Opv Class.1754262280-7.Bearing Housing Cover , Mandatory Spares.Opv Class.1754262280-8.Oil Seal , Mandatory Spares.Opv Class.1754262280-9.Pinoin Shaft , Mandatory Spares.Opv Class.1754262280-10.Gear Wheel , Mandatory Spares.Opv Class.1754262280-11.Ball Bearing , Mandatory Spares.Opv Class.1754262280-12.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-13.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-14.Main Shaft , Mandatory Spares.Opv Class.1754262280-15.Ball Bearing , Mandatory Spares.Opv Class.1754262280-16.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-17.Pinion & Shaft , Mandatory Spares.Opv Class.1754262280-18.Gear Wheel & Shaft , Mandatory Spares.Opv Class.1754262280-19.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-20.Tapper Roller Bearing , Mandatory Spares.Opv Class.1754262280-21.Shaft For Idle Gear , Mandatory Spares.Opv Class.1754262280-22.Ball Bearing , Mandatory Spares.Opv Class.1754262280-23.Dog Clutch , Mandatory Spares.Opv Class.1754262280-24.Hex:Bolt Nut & Sp:Washer , Mandatory Spares.Opv Class.1754262280-25.Clutch Engaging Lever , Mandatory Spares.Opv Class.1754262280-11.Bush Bearing , Mandatory Spares.Opv Class.1754262280-121.Oil Seal 50 X 65 X 7 , Mandatory Spares.Opv Class.1754262280-13.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-15.Lining , Mandatory Spares.Opv Class.1754262280-12.Rivet , Mandatory Spares.Opv Class.1754262280-14.Dead Man Brake , Mandatory Spares.Opv Class.1754262280-16.Pinion Shaft , Mandatory Spares.Opv Class.1754262280-111.Key , Mandatory Spares.Opv Class.1754262280-112.Ball Bearing , Mandatory Spares.Opv Class.1754262280-135.Ball Bearing , Mandatory Spares.Opv Class.1754262280-125.Csk Screw , Mandatory Spares.Opv Class.1754262280-122.Ball Bearing , Mandatory Spares.Opv Class.1754262280-120.Oil Seal 120 X 150 X 12 , Mandatory Spares.Opv Class.1754262280-132.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-114.Rope Cl , Mandatory Spares.Bangaram Class.1:02048:025.Bearing , Mandatory Spares.Bangaram Class.1:02048:026.Bearing , Mandatory Spares.Bangaram Class.1:02048:027.Bearing , Mandatory Spares.Bangaram Class.1:02048:028.Bearing , Mandatory Spares.Bangaram Class.1:02048:029.Bearing , Mandatory Spares.Bangaram Class.1:02046:012.Bearing , Mandatory Spares.Bangaram Class.1:02085:022.Bearing , Mandatory Spares.Bangaram Class.1:02051:040.Bearing , Mandatory Spares.Bangaram Class.1:02051:041.Bearing , Mandatory Spares.Bangaram Class.1:02051:042.Bearing , Mandatory Spares.Bangaram Class.1:02051:54.Oil Seal , Mandatory Spares.Bangaram Class.1:02051:062.Oil Seal , Mandatory Spares.Bangaram Class.1:02048:030.Oil Seal , Mandatory Spares.Bangaram Class.1:02048:031.Oil Seal , Mandatory Spares.Bangaram Class.1:02048:032.Oil Seal , Mandatory Spares.Bangaram Class.1:02051:069.Oil Seal , Mandatory Spares.Bangaram Class.1:02048:052.Oil Seal , Mandatory Spares.Bangaram Class.1:02045:005.Worm Wheel , Mandatory Spares.Bangaram Class.1:02045:006.Worm Shaft , Mandatory Spares.Bangaram Class.2:02048:025.Internal Circlip , Mandatory Spares.Bangaram Class.2:02048:026.External Circlip , Mandatory Spares.Bangaram Class.2:02048:028.Drain Plug , Mandatory Spares.Bangaram Class.2:02048:029.Oil Level Indicator , Mandatory Spares.Bangaram Class.2:02046:012.Csk Screw , Mandatory Spares.Bangaram Class.2:02085:022.Split Pin , Mandatory Spares.Bangaram Class.2:02051:040.Spring , Mandatory Spares.Bangaram Class.2:02051:041.External Circlip , Mandatory Spares.Bangaram Class.2:02051:069-2.Pinion Gear , Mandatory Spares.Bangaram Class.2:02048:052-3.Pinion Gear Shaft , Mandatory Spares.Bangaram Class.2:02051:54.O Ring , Mandatory Spares.Bangaram Class.2:02051:62.Hex Screw With Spring Washer , Mandatory Spares.Bangaram Class.2:02048:30.Socket Hd Csk Screw , Mandatory Spares.Bangaram Class.2:02048:31.Hex Screw With Spring Washer , Mandatory Spares.Bangaram Class.2:02048:32.Socket Hd Bolt , Mandatory Spares.Bangaram Class.2:02051:069.Hex Screw With Spring Washer , Mandatory Spares.Bangaram Class.2:02048:052.Hex Screw With Spring Washer , Mandatory Spares.Bangaram Class.2:02045:005.Hex Screw With Spring Washer , Mandatory Spares.Bangaram Class.2:02045:006.Bush Bearing , Mandatory Spares.Bangaram Class.2:02048:032-1.Thrust Ball Bearing , Mandatory Spares.Bangaram Class.2:02045:006A.Hex:Bolt With Nut And Sp:Washer , Mandatory Spares.Bangaram Class.2:02048:052B.Hex:Bolt With Nut And Sp:Washer , Mandatory Spares.Bangaram Class.2:02045:005C.Hex:Bolt With Nut And Sp:Washer , Mandatory Spares.Bangaram Class.2:02045:0060.Hex:Bolt With Nut And Sp:Washer , Mandatory Spares.Bangaram Class.2:02051-069-2A.Pinion Gear , Mandatory Spares.Bangaram Class.2:02048-052-3A.Pinion Gear Shaft , Mandatory Spares.Bangaram Class.1:02045-001A.Worm Wheel For Secondary Gear Box , Mandatory Spares.Bangaram Class.1:02045-001B.Worm Shaft For Secondary Gear Box , Mandatory Spares.Bangaram Class.1:02045-009A.Cylindrical Rollers , Mandatory Spares.Ammunition/Gemini Davit.162280-1.Spring , Mandatory Spares.Ammunition/Gemini Davit.162280-2.Ratchet , Mandatory Spares.Ammunition/Gemini Davit.162280-3.Gear/Sector Gear/Pinion , Mandatory Spares.Ammunition/Gemini Davit.162280-4.Bush Bearing , Mandatory Spares.Ammunition/Gemini Davit.162280-5.Foundation Bolts/ Nuts/ Washers , Mandatory Spares.Ammunition/Gemini Davit.162280-6.Locking Pin And Chain

Contact Information