|
101 - Characteristics Of The Siren Warning System A Siren Warning System Is A Means Of Urgently Informing The Population About The Occurrence Or Threat Of Emergency Situations. Its Main Task Is To Quickly Attract Peoples Attention And Signal The Need For Further Information. • Purpose: Warning The Population About Danger (Natural Disasters, Man-Made Accidents, Military Threats And Other Emergency Situations). • Operating Principle: When The Siren Is Turned On, An Intermittent Or Continuous Loud Sound Signal Is Given, Which Is Clearly Audible Over A Large Area. • Range: Depends On The Power Of The Equipment And Terrain Conditions; Modern Sirens Can Cover Large Areas Of A Populated Area. • Power Source: Electrical Network, Backup Batteries Or Autonomous Power Supplies. Gost R 42.3.01–2021.T, 101 - Characteristics Of The Inspection Device This Is A Technical Device Designed To Detect Prohibited Items, Substances Or Objects When Checking People, Luggage, Cargo Or Transport. Key Features: • Purpose: Detection Of Weapons, Explosives, Metal Objects, Contraband And Other Prohibited Objects. • Device Types: O Metal Detectors (Hand-Held And Stationary); • Operating Principle: Based On The Use Of Electromagnetic Fields, X-Rays, Radio Waves, Sensor Technologies Or Chemical Analysis. • Basic Parameters: O Detection Sensitivity; O Verification Speed; O Zone Or Size Of The Control Area; O Recognition Accuracy; O Possibility Of Automatic Alarm; O Operating Conditions. • Advantages: High Speed Of Inspection, Increased Security, Reduced Influence Of The Human Factor. • Areas Of Application: Airports, Transport Hubs, Enterprises, Government Agencies, Crowded Places., 101 - Diesel Generator With Ats (Automatic Transfer Of Reserve) According To The Specifications, 101 - Technical Characteristics Of A Hand-Held Loudspeaker (Megaphone) A Hand-Held Loudspeaker (Megaphone) Is A Portable Electro-Acoustic Device Designed For Promptly Alerting People, Transmitting Voice Messages And Commands, As Well As Amplifying Sound Over Long Distances. Main Technical Characteristics: • Type: Hand-Held Portable Loudspeaker (Megaphone). • Rated Power: 25–50 W. • Sound Propagation Range: 500–1500 M (In Open Areas, Depending On Model). • Frequency Range: 300–8000 Hz. • Sensitivity: 95–110 Db. • Power Source: Rechargeable Battery Or Replaceable Batteries. • Continuous Operation Time: 6–10 Hours. • Additional Functions: Siren, Volume Control, In Some Models - Recording And Playback Of Voice Messages. • Housing Material: Impact-Resistant Plastic (Abs). • Operating Temperature: –20 °C To +50 °C. • Weight: 0.8–2.5 Kg (Depending On Model)., 101 - Characteristics Of A Hand-Held Metal Detector: • Device Type: Handheld Portable Metal Detector. • Operating Principle: Based On Creating An Electromagnetic Field And Recording Its Changes When Approaching A Metal Object. • Sensitivity: Ability To Detect Small Metal Objects (Eg Knives, Keys, Metal Parts, Weapons - Depending On Model). • Detection Range: Usually From A Few Centimeters To 20–30 Cm (Depending On The Size And Type Of Metal). • Operating Frequency: Most Often In The Range Of Several Tens Of Kilohertz (Depending On The Manufacturer). • Detection Indication: O Sound Signal; O Light Indicator (Led); O Vibration (In Some Models). • Power: Batteries Or Rechargeable Battery (Usually 9 V Or Built-In Battery). • Operating Time: Depends On The Model And Mode Of Use, Often Several Tens Of Hours Of Continuous Operation. • Housing: Impact-Resistant Plastic, Resistant To Mechanical Stress. • Weight: Typically 200-500G, Allowing For Comfortable One-Handed Use. • Operating Temperature Range: Approximately –10 °C To +50 °C (May Vary By Model). • Operating Modes: Standard Search Mode, Sensitivity Adjustment, Silent Mode (In Some Models). Advantages Of A Hand-Held Metal Detector: • Compactness And Mobility; • Ease Of Operation; • Quick Inspection; • High Speed Of Detection Of Metal Objects; • Possibility Of Use In Places Where Installation Of Stationary Systems Is Impossible. Gost R 53705-2009, 101 - Characteristics Of The Anchor Clamp: • Purpose: To Hold A Cable Or Wire While Ensuring The Necessary Tension And Preventing Its Displacement. • Construction: Typically Consists Of A Body, Wedge(S), Clamping Element And Mounting Hardware. • Material Of Manufacture: O Aluminum Alloys (For Lightness And Corrosion Resistance); O Galvanized Steel (For High Mechanical Strength); O Polymer Materials (For Insulating Options). • Types: O Wedge Anchor Clamps; O Bolted Anchor Clamps; O Tension Clamps For Self-Supporting Insulated Wires (Self-Supporting Insulated Wires); O Clamps For Fiber Optic Cables. • Cable Cross-Section Range: Depends On The Model (For Example, For Sips, Options From Approximately 2×16 To 4×150 Mm² Are Often Used). • Permissible Load: Determined By The Strength Of The Housing And Fastening Elements; Can Range From Hundreds To Several Thousand Newtons. • Operating Temperature Range: Usually From −40 °C To +50...70 °C (Depending On The Manufacturer). • Resistance: Resistance To Ultraviolet Radiation, Moisture, Corrosion And Mechanical Stress. • Installation: Performed Without Damaging The Cable Insulation (For Sip) And Ensuring Reliable Tension. Gost R 59156-2020, 101 - Characteristics Of The Outdoor Lighting Lamp (150 W) • Power: 150 W. • Purpose: Intended For Lighting Streets, Parking Lots, Industrial Areas, Parks, Sports Grounds And Adjacent Areas Of Buildings. • Supply Voltage: Typically 220–240 V, 50 Hz. • Luminous Flux: Depending On The Type Of Lamp - Approximately 15,000–22,500 Lm (For Led Lamps). • Color Temperature: 3000 K (Warm White), 4000 K (Neutral White) Or 6500 K (Cool White). • Degree Of Protection: Usually Ip65 Or Ip66 - Protection From Dust And Precipitation. • Operating Temperature: –40 °C To +50 °C. • Service Life: For Led Lamps - Up To 100,000 Hours. • Housing: Made Of Corrosion-Resistant Aluminum Alloy With Tempered Glass Or Polycarbonate Safety Glass. • Installation: Mounting On A Support, Wall Or Bracket., 101Bp-Sip-4 4×16 - Self-Supporting Insulated Wire Without A Supporting Neutral Conductor, Consisting Of Four Equal Aluminum Conductors With A Cross-Section Of 16 Mm² Each. It Is Used For Overhead Power Lines And Branches To Buildings For Voltages Up To 0.6/1 Kv. Main Technical Characteristics Parameter Meaning Brand Sip-4 4×16 Number Of Cores 4 Core Cross-Section 4×16 Mm² Core Material Stranded Aluminum Insulation Light Stabilized Cross-Linked Polyethylene (Xlpe) Rated Voltage 0.6/1 Kv Frequency 50 Hz Operating Temperature From −60 °С To +50 °С Permissible Core Temperature Up To +90 °C In Long-Term Mode Temperature During Short Circuit Up To +250 °C (No More Than 5 S) Outer Diameter About 18Mm Estimated Weight Approx. 261 Kg/Km Minimum Bending Radius Of At Least 10 Outer Diameters Service Life Of At Least 40 Years Gost Main Regulatory Document: • Gost 31946-2012 - “Self-Supporting Insulated And Protected Wires For Overhead Power Lines. General Technical Conditions. Additionally Used: • Gost 22483-2012 - Conductive Conductors For Cables And Wires. • Gost 23286-78 - Standards For The Thickness Of Insulation, Sheaths And Testing Methods For Cable Products. Scope Of Application Sip-4 4×16 Is Used: • For Overhead Power Lines With A Voltage Of 0.4 Kv; • For Branches To Residential, Administrative And Industrial Buildings; • For Laying On Building Facades And Engineering Structures; • For Operation In Conditions Of High Humidity, Polluted Atmosphere And Exposure To Ultraviolet Radiation., 101Bp - Sip-2 2×16 - Self-Supporting Insulated Wire With Two Aluminum Conductors With A Cross-Section Of 16 Mm², Intended For Overhead Power Lines With A Voltage Of 0.6/1 Kv. Main Technical Characteristics Parameter Value, Brand Sip-2 2×16; Number Of Cores - 2; Core Cross-Section 2×16 Mm²; Core Material - Aluminum, Stranded.; Insulation - Light-Stabilized Cross-Linked Polyethylene (Xlpe); Rated Voltage 0.6/1 Kv; Frequency - 50 Hz; Permissible Core Temperature Up To +90 °C (During Operation), For A Short Time During Short Circuit - Up To +250 °C; Operating Temperature From - 60 °C To +50 °C; The Minimum Bending Radius Is At Least 10 Outer Diameters; Electrical Resistance Of The Core (20 °C) No More Than 1.91 Ohm/Km; The Outer Diameter Of The Core Is 4.6–5.1 Mm; Insulation Thickness 1.3 Mm; Service Life Of At Least 40 Years. • Gost 31946-2012, 101 - Basic Characteristics Of An Electric Pole (Power Line Support): 1. Purpose - To Hold Electrical Wires At A Certain Height And Ensure Their Safe Transmission Of Electricity. 2. Material: Reinforced Concrete (The Most Common); Steel (Metal). 3. Height: Usually 9–10 Meters; For High Voltage Lines It May Be More. 4. Mechanical Strength: Able To Withstand Wind, Ice Loads And Wire Tension. St Rk 2387-2013
|
