|
Tender For Vill-Nayan Block-Nangal Choudhary Vyamshala Completion -2-1. [10.10.1]Providing And Laying Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 1. 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate [Through Rate] 254.00 Sqm 2. [10.100.1]Cement Concrete 1:8:16 Flooring 1. Cement Concrete 1:8:16 With Over Burnt (Jhama) Brick Aggregate: 90 Mm To 40 Mm Size In Foundation And Plinth. [Through Rate] 49.50 Cum 3. [10.57]Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. [Through Rate] 138.60 Sqm 4. [10.58]Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacturer ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. [Through Rate] 9.00 Sqm 5. [11.5.4]12 Mm Cement Plaster Of Mix : 4. 1:6 (1 Cement: 6 Fine Sand) [Through Rate] 36.00 Sqm 6. [11.58]Providing And Applying Two Coats White Cement Based Putty Of Approved Brand And Manufacturer, Over Plastered Surface And Grinding The Surface Smooth With Sand Paper To Get En Even And Smooth Finish Including Cost And Carriage Of All Material , Labour Charges, Scaffolding, Sundries Etc. Complete [Through Rate] 444.00 Sqm 7. [11.6.2]15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 2. 1:6 (1 Cement: 6 Fine Sand) [Through Rate] 122.50 Sqm 8. [11.61.1]White Washing With Lime To Give An Even Shade : 1. New Work (Three Or More Coats) [Through Rate] 606.37 Sqm 9. [11.67.1]Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : 1. Water Thinnable Cement Primer [Through Rate] 582.50 Sqm0. [11.68.3]Applying Priming Coat: 3. With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works [Through Rate] 13.65 Sqm 11. [11.71.1]Wall Painting On A Cement Plaster Surface With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade : 1. Two Or More Coats On New Work [Through Rate] 582.50 Sqm 12. [11.77]Applying Pink Primer Or Aluminium Priming Coat On Wood Work Including Preparation Of Surface, Knotting And Stopping Etc. [Through Rate] 62.60 Sqm 13. [11.78]Painting Two Coats Excluding Priming Coat With Synthetic Enamel Paint In All Shades On New Wood Work Or Metallic Or Plastered Or Concrete Surfaces To Give An Even Shade. [Through Rate] 62.60 Sqm 14. [11.82.1]Painting The Wooden / Metal Surface With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : 1. Two Or More Coats On New Work [Through Rate] 13.60 Sqm 15. [12.65.1]Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete : 1. 300X16 Mm [Through Rate] 16.00 Each 16. [12.66.1]Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, (Barrel Type) With Necessary Screws Etc. Complete : 1. 250X10 Mm [Through Rate] 16.00 Each 17. [12.66.3]Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, (Barrel Type) With Necessary Screws Etc. Complete : 3. 150X10 Mm [Through Rate] 60.00 Each 18. [12.69.1]Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete : 1. 125 Mm [Through Rate] 16.00 Each 19. [12.69.2]Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete : 2. 100 Mm [Through Rate] 30.00 Each 20. [12.7.2.1]Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately) 2.1. Kiln Seasoned And Chemically Treated Hollock Wood 35 Mm Thick Shutters [Through Rate] 13.64 Sqm 21. [13.29.2]Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. 2. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works [Through Rate] 250.00 Kg. 22. [13.3.1.1]Providing And Fixing Pressed Steel Door Frames Conforming To Is: 4351, Manufactured From Commercial Mild Steel Sheet Of 2.0 Mm Thickness, Including Hinges, Jamb, Lock Jamb, Bead And If Required Angle Threshold Of Mild Steel Angle Of Section 50X25 Mm, Or Base Ties Of 2.00 Mm, Pressed Mild Steel Welded Or Rigidly Fixed Together By Mechanical Means, Including M.S. Pressed Butt Hinges 2.5 Mm Thick With Mortar Guards, Lock Strike-Plate And Shock Absorbers As Specified And Applying A Coat Of Approved Steel Primer After Pre-Treatment Of The Surface As Directed By Engineer-In-Charge: 1.1. Profile B Fixing With Adjustable Lugs With Split End Tail To Each Jamb [Through Rate] 23. [14.2]Dressing Side Slopes And Preparation Of Sub Grade For Lining By Mechanical/ Mannual Means [Through Rate] 210.00 Sqm 24. [17.69.3]Interlocking Concrete Block Pavement 3. Providing And Laying 60 Mm Thick Isi Marked Interlocking Paver Blocks Conforming To Is 15658:2006/Irc Sp 63: 2004 Of All Shapes And Colours In Design Mix Cement M 35 Over The Bed Of 25 Mm Thick Fine Sand Complete In All Respect. [Through Rate] 150.00 Sqm 25. [20.7.3]Stringing Out A.C./P.V.C Pipes And Specials Casting Along Trenches And Laying The Same In Trenches, To Correct Alignment And Gradients Including Cartage From Divisional Stores Or Nearest Railway Station To Site Of Works And Return Of Pieces Of Pipes To Stores. 3. 100 Mm Internal Diameter Of Pipe Line Laid Complete [Through Rate] 5.00 10 Metres 26. [22.1.1]Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: 1. White Vitreous Chinaware Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps [Through Rate] 2.00 Each 27. [22.181]Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. [Through Rate] 1000.00 Litre 28. [22.23.1]Providing And Fixing White Vitreous Chinaware Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required : 1. W.C. Pan With Isi Marked White Solid Plastic Seat And Lid [Through Rate] 2.00 Each 29. [22.89.2]Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I/C Making Good The Walls Etc. Concealed Pipe, Including Painting With Anti Corrosive Bitumastic Paint, Cutting Chases And Making Good The Wall : 2. 20 Mm Dia Nominal Bore [Through Rate] 30.48 Metre 30. [22.96.2]Providing And Fixing Brass Bib Cock Of Approved Quality : 2. 20 Mm Nominal Bore [Through Rate] 6.00 Each 31. [22.97.2]Providing And Fixing Brass Stop Cock Of Approved Quality : 2. 20 Mm Nominal Bore [Through Rate] 2.00 Each 32. [4.14.1]Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. 1. All Kinds Of Soil. [Through Rate] 25.00 Cum 33. [7.21.2]Brick Work With Common Burnt Clay Non-Modular Bricks Of Class Designation 10.5 In Foundation And Plinth In: 2. Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) [Through Rate]
|
