Tenders Are Invited For Renovation Of The Municipal Road In Łęki in Poland

Work Detail

1. General Description Of The Subject Of The Order. The Subject Of The Order Is The Renovation Of A Municipal Road In Łęki With A Length Of 491.70 M. Design Solution: A. Technical And Design Data For The Road Renovation: 1. Road Length - 491.70 Mb2. Road Surface Width: - 4.00 M Width. Roadsides – 0.50 M3. Municipal Road Class D – Access4. Design Speed - 30 Km/H5.Traffic Load - Kr16.Transverse Slope: On Horizontal Curves, One-Sided 2% - On A Straight Roof, 2%7.Road Surface: Triple Surface Reinforcement By Spraying With Asphalt Emulsion And Sprinkling With Stone Chips, On A Dolomite Crushed Base.B. The Route Of The Designed Road Coincides With The Existing Route And Is Within The Legal Limits Of The Road.C. The Road Grade Was Adjusted To The Existing Slopes And The Height (Ordinate) Of The Entrances. Area Summary: Road Area - 1,983.00 M2 Roadside Area - 492.00 M2 Surface Construction Sectionsfor The Access Road, Assuming Light Traffic Load /Kr1/ And Maintaining The Frost-Resistant Surface Requirement - The Following Construction Layers Were Adopted Surface: 1. Existing Subgrade, Soil Group – G1 And G2.2. Substructure - Layers From The Ground: A. Stabilization Layer Made Of Cement And Sand Mixture. Rm= 2.50 Mpa Thickness. 12 Cm, /From The Factory/.B. The Lower Foundation Layer Is Made Of Crushed Dolomite. About Fri. 0/63 Mm Thick 15 Cm, C. The Upper Foundation Layer Is Made Of Dolomite. About Fri. 0/31.50 Mm Thick. 7 Cm,3. Driving Layer - 3X Surface Consolidation Of The Surface With Emulsion + Grits: 1St Layer (Bottom) - Sprinkling With Cationic Emulsion In The Amount Of 2.50 And Laying A Layer Of Dolomite Aggregate - Grits With A Fraction Of 8/12 Mm In The Amount Of 20 Kg/M2. 2Nd Layer /Intermediate/ - Sprinkling With Cationic Emulsion In The Amount Of 2.0 Kg/M2 And Laying Dolomite Grits With A Fraction Of 5/8 Mm In The Amount Of 19 Kg/M2. Third Layer (Running Layer) - Sprinkling With Cationic Emulsion In The Amount Of 1.50 Kg/M2 And Laying Basalt Grits With A Fraction Of 2/5 Mm In The Amount Of 15 Kg/M2. 0/31.5 Mm /From Purchase/ Thick. 10 Cm

Contact Information