Tenders Are Invited For Overhaul And Refurbishment Work - Execution Of Works For The Investment Objective In ... in Romania

Work Detail

Overhaul And Refurbishment Work - Execution Of Works For The Investment Objective Increasing The Energy Efficiency Of The Public Building - Building A, Within The Alexandru Borza Agricultural Technological High School, Geoagiu City, Hunedoara County Smis Code 351837. Thermal Rehabilitation Of Building Envelope Elements; I. The Thermal Insulation Of The Facade - Glazed Part, I.E. The Replacement Of The Existing Exterior Carpentry, Including The One Related To The Access To The Building, With High-Performance Heat-Insulating Carpentry, The Replacement Of The Interior Carpentry: Access Doors And Windows To Unheated Or Insufficiently Heated Spaces If Necessary; - Installation Of The New External Pvc Carpentry With Tripan-Type Heat-Insulating Glass, Energy Efficient, Having Rmin = 0.83 M2k/W, Including The Provision Of The Glazed Facade With Shading Elements. - Thermal Insulation Of Opaque External Walls, Thermal Insulation Of Opaque External Walls Is Recommended, By Applying A Thermal Insulating Material To The Outside - Preferably Mineral Wool With A Thickness Of 20Cm; Insulation Of External Walls Below The Cts Level With Extruded Polystyrene Having A Thickness Of 10 Cm, Up To The Level Of The Foundation. The Existing Finishing Layers On The Exterior Facade Will Be Removed (Exterior Plaster); Continuity Of The Thermal Insulation Layer In The Plinth Area Is Ensured; Thermal Insulation Of The Frames On The Exterior Carpentry Contour. - Thermal Insulation Of The Floor Above The Last Level - In The Situation Of Keeping The Frame-Type Roof With Corrugated Metal Sheets, It Is Recommended To Use Rigid Thermal Insulation Boards Of The High-Density Basalt Mineral Wool Type, As Thermal Insulation Material With A Thickness Of 30 Cm; Iii. The Thermal Insulation Of The Walls That Form The Envelope Of The Building That Delimits The Heated Space From Other Unheated Common Spaces; - Thermal Insulation Of Spalls And Flashings With High-Density Basalt Mineral Wool Boards Of 2 Cm Thickness + Protection With Putty Board Reinforced With Glass Fiber Mesh; Vi. Other Types Of Works: - Construction Of The Protective Sidewalk On The Width Of 1 M, In Order To Eliminate Infiltrations To The Buildings Infrastructure; The Waterproofing Of The Plinth And The Rehabilitation Of The Green Area Around The Building, Affected By The Intervention Works; - Removing And Restoring The Covering And The Wooden Structure Of Access Canopies; - Restoring The Interior Finishes In The Intervention Areas; - Construction Of Plasterboard Ceilings On The Ground Floor And First Floor - Removal Of Existing Floors In The Basement In Order To Install Underfloor Heating - Non-Slip Tile Floors In The Basement - Replacement Of Internal Doors In The Basement With Pvc Carpentry - Dismantling And Reassembling The Metal Railing At The External Access; - Replacement Of Internal And External Window Shutters Made Of Pvc On The Inside And Galvanized Sheet Painted In An Electrostatic Field On The Outside; - As A Mandatory Measure For People With Disabilities, A Vertical Transport Equipment For People With Disabilities Will Be Purchased And Guidance Systems For The Blind Will Be Installed (Braille Plates, Tactile Markings, Etc.); Improvement/Modernization Of The Buildings Technical Systems: I. Installation/Rehabilitation/Modernization Of Centralized Ventilation Systems With A Minimum Of 75% Re

Contact Information