|
Back Handle With Chest, Manufactured With Carbon Steel Tubes Of At Least 3. 1/2 X 3.75 Mm; 2 X 3Mm; 2X 5.5Mm; 1.1/2 X 1.50Mm; 1 X 1.50Mm. Requipment Articulation Manufactured With Tube With A Diameter Of At Least 114Mm With A Minimum Of 7Mm Thickness. Laser-Cut Carbon Steel Sheets With Minimum Thickness Of 2Mm; 1/8, 3/16; 1/4. Drawn Solid Iron Rods Of At Least 3/8 With Zinc Plated Fixing Screws Of At Least 5/8 X 1.1/4 And Zinc Plated Washer Of At Least 5/8. Double Bearings And Phosphate-Based Surface Treatment Are Used; Colorful Thermo-Hardenable Polyester Resin Protective Film With Electrostatic Powder Deposition System, Mig Welding, Zinc Plated Screws, Washers And Fastening Nuts; 3.1/2 Internal Plastic Built-In Plug With Spherical Finish Following The External Dimension Of The Tube, Injected Plastic And/Or Rubberized Finishes. Cold Galvanized Fastening Screws With Protective Cover. High Fixation Destructive Reflective Sticker With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data., Individual Skier, Made Of Carbon Steel Tubes Of At Least 2` 1/2X2mm; 1` 1/2 X 3Mm; 1` 1/2 X 1.50Mm; 1`X 2.00Mm. Drawn Carbon Steel Tube 2` X 5, 50Mm Schedule 80 (60, 30 X 49, 22). Metal Of At Least 30Mm X 50Mm X 2Mm. Carbon Steel Plate Of At Least 4.75 Mm For The Equipment Fixing Point And 1.9 Mm For The Foot Support Plate. Flat Bar At Minimum 3/16` X 1 1/4`. Use Solid Pins, All Bearings (Double Bearings), Phosphate-Based Surface Treatment; Colored Temo-Hardenable Polyester Resin Protective Film With Electrostatic Powder Deposition System, Round Flexible Rubber Stops (53Mm Built-In Internal Plug In Injected Plastic Measuring At Least 2` 1/2 With A Spherical Finish Following The External Dimension Of The Tube. Injected And/Or Rubberized Plastic Finishes. 3M Destructive Reflective Sticker With Identification Of Muscle Groups With Manufacturers Logo., Double Vertical Swivel, Made Of Galvanized Carbon Steel Tubes Of 1, 1 1/4, 2 1/2 And Metalon Of 50 Polyester Platelets With Specifications Of The Muscles Worked, Screws And Antioxidant Nuts. Dimensions: Height 1.50M, Width 1.00M, Length 0.70M, Weight 30Kg, Galvanized Individual Course Simulator, Made From 1, 2, And 2 1/2 Galvanized Carbon Steel, Anti-Slip Pedals And High-Resistance Electrostatic Painting, Polyester Plaque With Specification Of The Muscles Worked, Antioxidant Screws And Nuts, Dimensions: Height 1.20M, Width 1, Length: 0.70, Weight 30Kg., Side Plank With Leg Exerciser, Made With 1, 2 And 4 Carbon Steel Tubes, Rubberized Handles And Footrest, Aluminum Pedal And High-Resistant Electrostatic Painting, Polyester Plate With Specification Of The Muscles Worked. Antioxidant Bolts And Nuts. Installation Type: Car Seat. Dimensions: Height: 1.52M, Width: 0.74M, Length: 1.70M. Weight: 35Kg.
|
