Three-Phase Submersible Pump 220 V, Pressure With 2 Bsp Internal Thread, Aluminum Body. With The Following Features: Power: 2 Hp (1.5 Kw); Voltage: 220 V – Three-Phase; Pressure (Output): 2 In.; Solids Passage: 6 Mm; Manometric Height: 30 Mca; Flow: 3M³/H; Motor: Ip68; Rotation: 3,450 Rpm; Current: 8 A; Housing: Aluminum; Shaft: Stainless Steel; Propellant: Vortex; Maximum Allowed Temperature: 40°C, Submersible Pump, Used For Residential And Rural Sewage Treatment And Wastewater Pumping. With The Following Characteristics: Power: 3 Hp; Voltage: 220V Single Phase; Settlement (Output): 2.5 In.; Maximum Flow: 47,000 L/H For 5 Mca (Meters); - Minimum Flow: 1,000 L/H For 24 Mca (Meters); Housing: Cast Iron; Rotor: Cast Iron (Semi-Open); Crushed Diameter: Up To 20Mm; Shaft: Stainless Steel; Maximum Submergence: 5 Meters; Temperature: Up To 40°C. It Has A Cutting Blade System (For Non-Abrasive Solids), A Two-Phase Submersible Pump For Raw Water (River) At Room Temperature, With The Following Characteristics: Flow Rate (Q): Up To 8.4 M³/H (140 L/Min). Manometric Height (H): Up To 9.0M. Pressure Nozzle: 1.1/4”Bsp (Screwable) With Check Valve. Rotor: Open In Technopolymer. Electric Motor Characteristics Minimum Power: 0.5 Kw. Minimum Rotation: 3,500 Rpm (02 Poles). Voltage: 220 Volts (Single-Phase). Frequency: 60 Hz. Insulation: Class F. Housing And Support Base: Technopolymer, Submersible Pump With The Following Characteristics: Housing, Intermediate And Wear Plate In Cast Iron. Semi-Open Impeller In Cast Iron. Rotor Fixed To The Shaft By Key. Silicon. Manometric Height: 20 Mca Electric Motor: Three-Phase, Dielectric Oil Cooled Motor. Rotation: 3,500 Rpm - 60 Hz. Three-Phase 220/V - 3 Poles Degree Of Protection Ip 68 Insulation Class B Technical Data: 40 Mm Solid Nozzles With 3” Bsp Thread. Maximum Liquid Pumping 40°C., Characteristics Of The Self-Priming Motor Pump Sets: Flow Of 4 M³/H (At 28 M.C.A.); Holding Pressure: 3 Bar; Easy Maintenance And Cleaning; Self-Priming; Re-Priming Height: 5.5 Meters; Cast Iron Body; Three-Phase Motor 220/380; Frequency 60 Hz; Insulation: Class B; Protection: Ip 55 (Nbr 6146); Liquid To Be Pumped - Chlorinated Treated Water, Low Pressure Self-Priming Motor Pump Set Cast Iron Body With Anti-Corrosive Paint Coating. Suction Height: 8M Suction Nozzle: ¾” Pressure Nozzle: ¾” Manometric Height: 25Mca Suction Flow 0Mca: 2. 3M³/H Closed Rotor: 107Mm Rotor, Diffuser, Injector Nozzle And Valve Assembly Composed Of Noryl®, With 30% Fiberglass (For Greater Resistance). 1/2 Hp Motor With Built-In Flange, Thermal Protection And Permanent Capacitor, Monobloc Horizontal Centrifugal Motor Pump Set, With The Following Features: Rotation: 3500 Rpm, Flow: 7. 7 M³/H, Minimum Head: 17 Mca, Liquid: Clean Water At Room Temperature 1” Threaded Suction And Discharge Nozzles Bsp. Pump Construction Materials: Housing: Fluffy Gray Astm A 48 Class 30, Rotor: Fluffy Gray Astm A 48 Class 30, Covers: Fluffy Gray Astm A 48 Class 30, Shaft: Astm A-576 Grade 1045 Carbon Steel And Seal: Mechanical Seal. 1/2 Hp, Rotation: 3500 Rpm, Protection: Ip (W) 55 (Nbr 7094), Voltage: 220 Volts Three-Phase, Freq
Contact Information
View Notice Now...
Fill Detail for Getting Instant Access
Download Tender Document / Tender Notice
Dear Sir,
Warm Greetings from TenderDetail.com !!
We have received Tender Document request for the TDR No : 114651205
Tender Notice along with it's Attachments ( Tender Document / Scan Image of News Paper)
sent to your Email Address :.
Please check your email for Tender Document.