|
Relay, Connector, Pp Cable 2X2.5Mm, Insulating Tape, Ornamental Set Must Consist Of A Pole And Circular Ornamental Led L Total Height Of The Assembly Must Be From 4,800 Mm To 5,000 Mm. It Is Required To Have A Hollow, Conical Cylindrical Ornamental Base, Made Of Concrete, With A Smooth External Finish, With A Wall Of At Least 30Mm Thick And 550Mm High. The Fastening System Must Be Made By Flanging, Incorporated Through Threaded Drawn Steel Anchors, With Screws, Nuts And Washers Mandatory Protected Against Oxidation And Vandalism. The First Section Of The Post (Lower Section) Must Be Made Of Zinc-Plated Or Galvanized Steel Tube, With A Minimum Thickness Of 2 Mm And A Minimum Of 4 Inches In Diameter, Which Must Have A Length Of 2.0 Meters. The Intermediate Section Of The Post (Central) Must Be Made Of Zinc Plated Or Galvanized Tube With A Minimum Thickness Of 2 Mm And A Diameter Of 3.5 Inches With A Length Of 1.0 Meter. The Final Section Of The Post (Top) Must Be Made Of Zinc Plated Or Galvanized Tube With A Minimum Thickness Of 2 Mm And A Diameter Of 3 Inches With A Length Of 500 Mm, To Generate Mechanical Resistance. Fluted Aluminum Adornment With Polished Finish 3.5 Inches In Diameter And 1.20 Meters Long. The Luminaire Must Be Manufactured From Injected Or Extruded Aluminum. The Led Assembly Must Have A Heat Dissipation System Using Fins. These Fins Must Form A Single Piece With The Surface On Which The Led Board(S) Will Be Installed. Fins, Fitted, Screwed, Glued Or Welded Will Not Be Accepted. The Luminaire Assembly Must Have A Polymerized Polyester Electrostatic Paint Finish. The Luminaire Must Have Identification Made With Laser Engraving On The Body Of The Luminaire With The Information: Name Of The Municipality, Luminaire Power, Efficiency, Color Temperature And Date Of Manufacture Of The Batch (Laser Engraving Is Necessary To Control Warranty And Theft, As Glued Labels Can Be Easily Removed). Sealing The Vital Parts Of The Luminaire..., Led Public Luminaire With Maximum Power 55W Using Led Technology (Light Emitting Diode), Made Of Aluminum Body. Must Meet The Following Characteristics: Body Made Of Aluminum Alloy, Injected At High Pressure And Or Extruded Aluminum, Having Fins For Heat Dissipation; It Must Have An Internal Pressure Relief Valve; Finish Painted By Electrostatic Process In Powdered Polyester Resin; Product Identification Made Through Laser Engraving Directly On The Body Of The Luminaire; Minimum Degree Of Protection Ip 66 Total For Optimal Assembly And Driver Compartment; Robust Construction Resistant To Severe Vibrations And The Action Of Winds With Speeds Of 150 Km/H, Resistance To Mechanical Impact Ik-09; Fixing For Arm Or Central Support Of 48.5 Mm With Angle Adjustment Of ± 10° Directly On The Luminaire Without The Use Of An Adapter, Screws Made Of Stainless Material, The Housing Block Must Be Separated From The Optical Assembly. Color Rendering Index (Irc = 70);With Color Temperature Of 5000K; Maximum Power Declared On The Certificate Of 55 Watts: Luminous Efficiency Declared On The Certificate Equal To Or Greater Than 170Lm/W; It Must Have A Luminous Flux Declared On The Certificate Of At Least 9,350 Lumens; Transverse Photometric Classification Type Ii Or Iii Longitudinal, Medium Or Long; Bivolt Supply Voltage 110V To 240V, Control Surge Protector
|
