|
Polo T-Shirt, Short Sleeve, Made From High Quality Mixed Piquet Knit, Composed Of Approximately 50% Cotton And 50% Polyester, With A Weight Between 160 G/M² And 190 G/M², Ensuring A Balance Between Thermal Comfort, Mechanical Resistance And Durability. The Fabric Must Have A Soft Touch, Good Breathability, Low Heat Retention And Resistance To Continuous Use And Frequent Washing. The Collar Must Be Structured, And May Be Straight Or With Internal Reinforcement, Maintaining Its Shape And Rigidity After Washing, With A Front Closure Per View With 02 (Two) Or 03 (Three) Functional Buttons, Properly Aligned, Resistant And Firmly Fixed, With A Reinforced Buttonhole. The View Must Be Reinforced, Avoiding Deformations. The Sleeves Must Be Short, Finished With A Reinforced Cuff Or Double Hem, Ensuring Better Fit And Durability. The General Finish Must Include A Double Bottom Hem, Reinforced Seams At All Joints, Including Shoulders And Sides, In Addition To Structural Reinforcement On The Shoulders To Prevent Deformation. The Piece Must Be Highly Durable And Cannot Fade, Shrink Or Deform, In Addition To Having A Low Tendency To Wrinkle, Maintaining An Adequate Visual Appearance Even After Continuous Use. The Piece Must Be Provided With Institutional Personalization, Containing The Logos Applied According To The Standard Defined By The Contractor Using High Quality Embroidery Or Print, Guaranteeing Durability, Definition And Resistance To Washing. Sizes Must Comprise Xs, S, M, L, Xl Or Exg., Long-Sleeved T-Shirt Made From Technological Mesh With Built-In Sun Protection, Developed For Protection Against Uva And Uvb Ultraviolet Rays, With A Minimum Protection Factor Upf 50+ (Or Higher), Proven By The Manufacturers Technical Specification. The Fabric Should Be Light, Breathable, Quick-Drying, With A High Sweat Evaporation Capacity, Non-Transparent And Suitable For Prolonged Use In Outdoor Environments. The Sleeves Must Be Long, With Reinforced Cuffs, Ensuring Better Fit And Resistance. The Finishing Of The Piece Must Include Reinforced Seams Throughout The Structure And A Double Hem, Ensuring Durability. The T-Shirt Must Maintain Thermal Comfort Even Under Sun Exposure, Shrink Or Lose Its Uv Protection Properties After Washing. The Piece Must Be Supplied With Institutional Personalization Applied According To The Layout Provided By The Contractor, Through High Quality Embroidery Or Print. Sizes Must Comprise Pp, Abadá Model T-Shirt (Regatta), Unisex, Made In Premium Cold Mesh, Preferably In Polyester Composition With Viscose (Pv) Or 100% High Quality Polyester, With Approximate Composition Of 67% Polyester And 33% Viscose Or Higher, And Weight Between 150 G/M² And 180 G/M². The Fabric Should Have A Soft And Smooth Touch, High Breathability, Good Thermal Ventilation, Quick Drying And Comfort For Prolonged Use, Being Especially Suitable For The Elderly. It Must Have A Low Tendency To Wrinkle, Low Shrinkage, High Resistance To Frequent Washing And Not Fade Easily. The Design Should Be Of The Tank Top Type (Abadá), With A Loose And Comfortable Cut, Avoiding Tight Pieces, Guaranteeing Mobility And Well-Being To The User. The Model Must Be Unisex, With Sizes Varying From Small To Large (Or As Required By The Body), With An Appropriate Length, Not Being Excessively Short Or
|
