|
Tender For Comprehensive Maintenance In Armd Reg And Asc Btln Under Ge (East) Ferozepur Cantt- 1 Racking Out Joints/ Pointing To Brick Work Or Brick Tiles, Laid Flat In Floors, Surface Channels, Roofs Etc. Work Built In Cement Mortar & M&L Flush Pointing To Brick Laid Flat Or Brick Tiles In Roofs And Paving In Cement Mortar (1:3), Complete All As Specified And Directed 2 Dismantling Of Brick Tiles Or Terracing Tiles Single Layer Laid On Roof Jointed & Pointed In Cement Mortar Complete All As Specified And Directed 3 Dismantling Brick Tiles Laid In Double Layer Jointed & Pointed In Cement Mortar Incl Removal Of Grass Vegetation, Complete All As Specified And Directed 4 Dismantling Timber Scantlings In Fillets, Rails, Posts, Rafters, Purlins, Etc; Under 40 Sq. Cm In Each Section, Fixed In Any Position As In Framed Work, Complete All As Specified And Directed 5 S&F Roof Trusses (Framed), Trussed Purlins Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle Channel Or Flat Sections) Including Distance Pieces, Cleats Etc. Fe-410-W(Gde-E-250)Quality-B, Complete All As Specified And Directed 6 Demolition Mud In Roofs, Any Thickness, Including Plastering And Leeping Etc Complete All As Specified And Directed 7 Roughening Surfaces Of Old Concrete Floor/ Roof For Removing Old Bitumen Coat/ Any Other Type Of Treatment Etc., By Picking, Sweeping Clean And Washing Down With Water To Remove Dirt/ Dust Etc, Complete All As Specified And Directed 8 M&L For Rendering 10 Mm Thick Cement Plaster On Roof Surfaces In Cement Mortar (1:4) Complete All As Specified And Directed 9 M&L For Applying Evenly A Tack Coat Of Industrial Bitumen 85/25 @ 1.5 Kg Per Sqm Over A Coat Of Bitumen Primer @ 0.30 Ltr Per Sqm Including Preparation Of Roof Surfaces Complete All As Specified And As Directed. 10 M&L For Polythene Film, 150 Micron Thick, Laid On Roofs With 150 Mm Overlaps Complete All As Specified And As Directed. 11 M&L 80 Mm Thick Average Consolidated Thickness Mud Phuska On Flat Roofs Including 25 Mm Thick Mud Plaster And 3 Mm Thick Leeping Plaster Etc Complete All As Specified And Directed 12 M&L 40 Mm Thick Brick Tiles Laid On Mud Mortar And Joints Grouted Flush In Cement Mortar 1:3 Mixed With 5% Of Crude Oil By Weight Of Cement, On Mud Phuska Complete All As Specified And Directed 13 All As Per Srl Item No 12 Here-In-Before But Using Old Brick Tiles Retrieved From Dismantling (Item No 2 & 3 Above Here-In-Before) Including Cleaning And Removal Of Mortar From Tiles Complete All As Specified And Directed 14 Material & Labour For Glazed Ceramic Coloured Tiles In Vertical Surfaces 300X200X6-7/ 300X450X 7-8 Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over Including 10 Mm Thick Rendering In Cement Mortar (1:4) On Fair Faces Of Brick Work Or Concrete Surfaces Including Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding Removing Seviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed 15 Material & Labour For Non Skid Ceramic Coloured Tiles7 To 8 Mm Thick (Square) Area Of Each Tiles Exceeding 0.11 Sqm But Nexc 0.18 Sqm,In Floor Etc Set And Jointed In Neet Cement Slurry And Pointed In White Or Coloured Cement To Match Over Including 15 Mm Thick Screed Bed In Cement Mortar (1:6) Including Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing) Removing Seviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed 16 All As Per Item No-15 Here-In-Before But As On Vertical Surfaces Such As Skirting/Dado Over And Including 10 Mm Thick Rendering In Cement Mortar (1:4), Including Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing) Removing Seviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed 17 Material & Labour For Non Skid Ceramic Coloured Tiles7 To 8 Mm Thick (Square) Area Of Each Tiles Exceeding 0.06 Sqm But Nexc 0.11 Sqm,In Floor Etc Set And Jointed In Neet Cement Slurry And Pointed In White Or Coloured Cement To Match Over Including 15 Mm Thick Screed Bed In Cement Mortar (1:6) Including Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing) Removing Seviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed 18 Material & Labour For Vitrified Ceramic Tiles 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over Including 15 Mm Thick Screed Bed In Cement Mortar (1:6) Including Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing) Removing Seviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed 19 All As Per Item No-18 Here-In-Before But As On Vertical Surfaces Such As Skirting/Dado Over And Including 10 Mm Thick Rendering In Cement Mortar (1:4), Including Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing) Removing Seviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed 20 Demolition Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Etc Laid Bedded And Pointed In Any Mortar Complete All As Specified And Directed 21 M&L For Chequered Cement Concrete Tiles 30Cm X 30Cm X 22-25Mm Thick, Set, Jointed And Pointed In Neat Cement Slurry With Grey Cement And Pigments In Flors Over 15 Mm Thick Screed Bed 1:6 Complete All As Specified And Directed 22 Demolition Of Un-Reinforced Cement Concrete In Any Position Complete All As Specified And Directed 23 M&L For Cement Concrete (1:3:6) Type C-2 Using 40 Mm Graded Stone Aggregate As In Plinth Protection, 75Mm Thick, Surfaces Finished Even And Fair Without Using Extra Cement As In Plinth Protection Including Provision Of Construction Joints, Complete All As Specified And Directed 24 M&L For 40 Mm Thick Pcc (1:2:4) Type B-1 Using 20 Mm Graded Crushed Stone Agg.As In Floor Finished Complete All As Specified And Directed 25 S&F Glass Dividing Strips, 3Mm Thick Width Of Strip 38 Mm Complete All As Specified And Directed 26 Taking Down Cement Plaster On Brick Walls Of Any Description Including Racking Out Joints, Hacking For Key, Scrubbing Down With Water Etc Complete All As Specified And Directed 27 M&L For Rendering 15 Mm Thick In Cement Mortar (1:4) On Any Face Of Brick Walls Or Concrete Surfaces, Finished Fair And Even Including Wpc & M&L Preparation Of New Plastered Or Unplastered Surfaces And Applying Two Coats Of Cement Based Paint Over A Coat Of Chalk White Primer On Walls Complete All As Specified And Directed. (Wpc Measured And Paid Separately) 28 M&L For Rendering 15 Mm Thick In Cement Mortar (1:6) On Any Face Of Brick Walls Or Concrete Surfaces, Finished Fair And Smooth Without Using Extra Cement Complete All As Specified Including Preparation Of New Surfaces Of Wall And Applying Two Coats Of White Lime Wash (White Washing) On Walls Including Corneces, Pillars Etc Complete All As Specified & Directed. 29 M&L For Rendering 5 Mm Thick On Ceiling Surfaces In Cement Mortar (1:3) Finished Even & Smooth Without Using Extra Cement Including M&L Preparation Of New Plastered Or Unplastered Surfaces And Applying Two Coats Of White Wash On Ceilings Complete All As Specified And Directed. 30 Supply Only Integral Water Proofing Compound (Isi Marked), Complete All As Specified And Directed 31 M&L For Rcc Type B1, Nominal Mix 1:2:4 (20 Mm Graded Stone Agg) As In Chajja, Parapets & Facia Etc Including Demolition Rcc Roofs, Floors (Other Than Ground Floors), Beams Staircases, Landing, Chajjas, And Similar Suspended Work, Complete All As Specified And Directed. 32 M&L For Use & Waste Wooden Form Work (Rough Finished Surfaces ) To Sides & Soffits Of Chajjas, Parapets & Facia And Similar Work N. Exc 200 Mm Thick, Complete All As Specified And Directed 33 Mild Steel Tmt Mild Steel Bars 10Mm Dia And Over,Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With The Including Mild Steel Wire (Annealed) Not Less Than 0.9Mmdia Or Securing With Clips, Complete All As Specified And Directed 34 M&L For Preparation Of Old Decorated Surfaces Of Wall And Applying One Coat Of White Lime Wash (White Washing) On Walls Including Preparation Corneces, Pillars By Brooming Down With Steel Wire Brushing Scrapping Down Smoke Dust, Moulds, Moss And Efflorescent Salts And Removing Oily And Greasy Spots Complete All As Specified And Directed. 35 M&L For Preparation Of Old Decorated Surface Of Wall And Applying One Coat Of Cement Based Paint Including Corneces, Pillars Etc Complete All As Specified And Directed. 36 M&L For Preparation Of Old Decorated Surfaces On Ceiling And Applying One Coat Of White Lime Wash Including Preparation Cornice And Pillars By Brooming Down With Steel Wire Brushing Scrapping Down Smoke Dust, Moulds, Moss And Efflorescent Salts And Removing Oily And Greasy Spots Complete All As Specified And Directed. 37 M&L For Preparation Of Old Decorated Surface Of Wall And Applying One Coat Of Oil Emulsion Distemper, Complete All As Specified And Directed 38 M&L For Preparation Of Old Painted Wood Or Wood Based Surfaces Of Any Description Not Otherwise Described Over 10Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. 39 M&L For Preparation Of Old Decorated Surface Of Steel Surfaces Of Any Description Not Otherwise Described Over 10 Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint, Complete All As Specified And Directed 40 M&L For Preparation Of Old Decorated Surfaces Of Wall And Applying One Coats Of Colour Wash On Wall Incl. Corners, Pillars Etc On Prepared Surface Complete All As Specified And Directed 41 Applying One Coat Of Acrylic Exterior Emulsion On Walls Including Preparation Of Old Decorated Plaster Surfaces On Wall As Specified And Directed By Engr-In-Charge. 42 M&L For Cement Concrete (1:2:4) Type B-1 Using 20Mm Graded Stone Aggregate As In Roof Padding, Complete All As Specified And Directed 43 M&L For Rendering 10 Mm Thick In Cm (1:4) Mixed With Integral Water Proofing Compound As Per Mfg Instr Over The Padding Concrete While Still The Concrete Is Still Green, Complete All As Specified & Directed (For Roof Treatment) 44 M&L For Water Proofing Treatment To Roof Surface Including Parapet Wall Comprising With The Following Course Of Treatment/ Specifications Form Bottom To Top:-(A) Applying Evenly A Tack Coat Of Industrial Bitumen 85/25 @ 1.2 Kg Per Sqm Over A Coat Of Bitumen Primer @ 0.30 Ltr Per Sqm Including Preparation Of Roof Surfaces Complete All As Specified And As Directed. (B) One Layer Of App Based Polymeric Membrane Minimum Weighing 3Kg/Sqm And Minimum 3Mm Thick Reinforced With Polyster Non Wove Fabric (Wt. Not Less Than 150 Gms/Sqm) Land On Primed Surface By Forced Application Complete All As Specified. Polymeric Membrane Shall Be Taken To A Height Of 60 Cm (Minimum) And Then Inserted Inside The Groove Of Parapet Walls And Shall Be Finished By A Membrane Flashing.Note: (I) Laying Of App Based Membranes Shall Be Done By Torch On Method Or As Per ManufacturerS Instructions.(Ii) A Minimum Overlap Shall Be 75Mm Length Wise And 100 Mm Width Wise Of Polymeric Membranes Respectively And Sealed All Overlaps And Joints As ManufacturerS Instructions. 45 M&L For Two Coat Of Aluminium Paint Over App Membrane, Complete All As Specified And Directed 46 Cement Concrete (1:2:4), Type B-0 Using 12.5Mm Graded Stone Aggregate As In Benching, Kerbs, Mud Stop, Rounded Or Chamfered On Edges Including Form Work, Complete All As Specified And Directed 47 M&L For Laying App Based Polymeric Membrane 3Mm Thick With Minimum Weight Not Less Than 3 Kg/Sqm, Reinforced With Non Woven Polyster Fabric (Wt Not Less Than 160 Gms/Sqm) Torching Joints/Overlaps With A Propane Or A Butane Gas Torch,Laid With A Minimum Overlap Of 150Mm With Thermo Fusable Finish Laid/Bonded Over A Coat Of Hot Blown Bitumen 85/25@1.20Kg/Sqm,Over Forced Application Bitumen Primer @0.30 Litres Per Sqm,Including Preparation Of Plastered Surfaces Of Sunken Portion ,Complete All As Specified And As Directed. 48 M & L Rendering 10Mm Plaster In Cm(1:3) Finished Even And Smooth With Using Extra Cement On Vertical Surface Of Sunken Portion Wall And Floor With Water Proofing Compound (In Case Of Re Placement Of Bottom Layer Tile), Complete All As Specified And Directed. (Wpc Shall Be Measured Separately). 49 M&L For Cement Concrete (1:5:10) Type E-2 Using 40 Mm Graded Stone Aggregate As In Filling In Sunkan Slab Or As In Sub Base, Mass Concrete, Complete All As Specified And Directed 50 M & L For Gi Steel Water Tubing, 40 Mm Bore Medium Grade Galvanised With All Fitting And Fixed To Wall And Ceiling Or Laid In Floor, Complete All As Specified And Directed. 51 S&F In Repair 32 Mm Bore Dia Of Only Fixed In Discharge Pipe Waste Coupling Of Ptmt (Half Or Full Threaded) Suitable For Urinals, (Minimum Weight 32Mm-45Gms) With Waste Pipe, Complete All As Specified And Directed 52 S&F In Repair 32 Mm Bore Dia Bottle Trap Of Ptmt Having Minimum Water Seal Of 25Mm .(Minimum Weight 32Mm-260Gms/40Mm-270 Gms), Complete All As Specified And Directed. 53 Demolition Of Brick Work Or Stone/Boulder Masonary Built In Cement Mortor Including All Quoins, Arches, Pillars Etc, Complete All As Specified And Directed. 54 M&L Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exceeding 6M Mean Radius Built In Cm (1:6) Complete All As Specified And Directed. 55 All As Per Item 54 Above Here-In-Before But Using Old Bricks Retrieved From Dismantling Under Here-In-Before Including Cleaning And Removal Of Mortar From Old Bricks Etc Complete All As Specified And Directed. 56 Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Of Size Not Exceeding 1.5 Sqm Each Including Cutting Holes In Brick Walls Of Appropriate Size For Insertion Of Cement Concrete Blocks For Hold Fasts Or Otherwise, Complete All As Specified And Directed 57 Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Of Size Exceeding 1.5 Sqm But N.Exc 4 Sqm Each Including Cutting Holes In Brick Walls Of Appropriate Size For Insertion Of Cement Concrete Blocks For Hold Fasts Or Otherwise, Complete All As Specified And Directed 58 Taking Down Shutters Of Any Description Exc 1 Sqm And Not Exc 2 Sqm Each Or Otherwise, Complete All As Specified And Directed 59 S&F For Pressed Steel Frames For Doors 1.25 Mm Thick Ms Sheet Of Profile (105X60)Mm For Doors And Windows Frames With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock, Strike Plates, Shock Absorber 20Mm Dia, 60Mm Ms Conduit For Housing Of A Drop Bolt Etc. Treating Of Internal Surfaces Of Chowkhats With Coal Tar Or Black Paint Complete All As Specified And Directed 60 S&F For Pressed Steel Frames For Doors 1.25 Mm Thick Ms Sheet Of Profile (125X60)Mm For Doors And Windows Frames With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock, Strike Plates, Shock Absorber 20Mm Dia, 60Mm Ms Conduit For Housing Of A Drop Bolt Etc. Treating Of Internal Surfaces Of Chowkhats With Coal Tar Or Black Paint Complete All As Specified And Directed. 61 M&L For Pcc (1:3:6) Type C-1 Using 20 Mm Graded Stone Agg .As In Filling Steel Frames Etc Including Necessary Form Work Complete All As Specified And Directed. 62 Material And Labour For Pcc (1:2:4) Type B1 With Using 20 Mm Graded Stone Agg As In Bed Block Hold Fast Block Complete All As Specified And Directed 63 S&F For 35 Mm Thick, 2Nd Class Hard Wood, Plain Framed, Panelled Shutters (Any Number Of Panels) With Panels Of Timber Flat On Both Sides (Feather Edged) Or Of Veneered Particles Board Medium Density Wood Particle Board With Comercial Face Veneers, Size Of Members As Specified In Clause 8.24 (A) Of Mes Schedule Part-I Section-Ii, Complete All As Specified And Directed 64 S&F 35 Mm Thick,2Nd Class Hard Wood, Glazed And Skeleton Shutters Open Rebated And Prepared To Receive Glass,Gauge Etc (Without Sash Bars), Edges Of Framing Plain Chamfered Or Rounded, Fitted With Cut And Mitered Beads For Securing Glass Etc, Size Of Members Of Shutters As Specified In Ssr Part-I Section 8, Clause 8.24 (A) Of Mes Schedule Part-I Section-8, Complete All As Specified And Directed. 65 S&F 200 Mm Mild Steel Barrel Tower Bolt, Stove Enamelled Black, With Bright Bolt Complete All As Specified And Directed. 66 S&F 150 Mm Mild Steel Pressed Handles, Oval Type Stove Enamelled Black Complete All As Specified And Directed. 67 S&F For 250 Mm Mild Steel Sliding Door Bolts Plate Type, Stove Enamelled Black, With Bright Bolt Not Less Than 12 Mm Dia With And Including A Minimum 6 Bolts And Nuts, Four On Bolt Plate And Two On Staple Plate Complete All As Specified And Directed. 68 S&F In Repair 150Mm, Ordinary Rat Tail Rod Patttern Springs Includding Roller And Roller Plate Complete All As Specified And Directed. 69 S&F In Repair 200 Mm Mild Steel Barrel Tower Bolt, Stove Enamelled Black, With Bright Bolt Complete All As Specified And Directed. 70 S&F In Repair 150 Mm Mild Steel Pressed Handles, Oval Type Stove Enamelled Black Complete All As Specified And Directed 71 S&F In Repair For 250 Mm Mild Steel Sliding Door Bolts Plate Type, Stove Enamelled Black, With Bright Bolt Not Less Than 12 Mm Dia With And Including A Minimum 6 Bolts And Nuts, Four On Bolt Plate And Two On Staple Plate Complete All As Specified And Directed 72 S&F In Repair Anodised Aluminium Powder Coated (Minimum Thickness Of Powder Coating 50 Micron) Frame For Doors,Windows,Ventilators, Partition With One Or More Rebated Incl Joining Cleat For Fixing Etc. Complete All As Specified And Directed 73 S & F In Repair Anodised Aluminium Powder Coated Door Shutters Aluminimum Section Weighing 0.55 Kg/M Incl Necessary Joining Cleats Glazing Clips, Rubber Neoprene Packing, Handles 2 Nos In Each Doors, Hinges, Anodiesed Aluminium Snap Beading Screw Etc Complete All As Specified And Directed. 74 Anodised Aluminium Window And Ventilator Shutters, Side Hung Type Without Sash Bars, Aluminium Sections Weighing 0.55 Kg/M Including Necessary Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Screws, Anodised Aluminium Fittings Such As Peg Stays 150Mm Long (1 No.). Hinges Type B-21 100Mm Long (2 No.) Suitable Handle (1No.), Complete All As Specified And Directed.Noted:- Aluminium Chowkhat /Frame, Glass,Wiremess And Aluminium Grill Shall Be Measured And Paid Separately. 75 S&F In 5.5 Mm Thick Plain Sheet Glass Panes Exc 0.5 Sq. M In Each Pane ®, Complete All As Specified And Directed 76 Repair Of Aluminium Doors/Windows Of Any Size Including Rubber Gasket Beading/Glazing Clip, Rawl Plug/ Screws Including 5Mm Thick Or Any Thickness Plane Glass/Frosted Glass/Toughened Glass Of Any Thickness Dirn Given By Engr-In-Charge And Including Repair Of Alu Channel/Frame/Shutter Including Suitable Aluminium Handle/ Tower Bolts Size Given By Engr-In-Charge All As Specified And Directed. 77 S&F In Repair 100 Mm Aliminium Mortice Lock, Vertical Type 2 Levers, Complete All As Specified And Directed 78 S&F In Repair Door Closer Hydraulically Regulated, Designation No. 3, Universal Type, Suitable For Door Hutters Of 851 To 1000 Mm In Width And Of Weight Between 61 To 80 Kg And Fixed Aluminium (Extruded Body Section Body). Complete All As Specified And Directed 79 M &L For Double Action Floor Spring Hydraulically Regulated Made Up Of Minimum 1.25 Mm Thick Aluminium Alloy Sheet Foundation Box, Main Body With Stainless Steel Cover, Governing Pivot Made Of Brass, Other Parts Made Of Mild Steel Heavy Duty And Fixed In Repair, Complete All As Specified And Directed 80 M&L For Preparation Of New Wooden Surfaces Of Any Description Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed. 81 S&F Solid Pvc Door Frame Of Size 50Mmx47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Rainforced With Ms Square Tube Complete All As Specified And Directed. 82 S&F Factory Made Solid Panel Pvc Door Shutter 30Mm Thick (Style) Consisting Of Frame Made Out Of Ms Tubes For Top And Bottom Rail Ms Frame Shall Be Covered With Heat Moulded Plain / Coloured Pvc \C\Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Styles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail; On Either Side & As Gap Insert For Top Rail;Panelling Of Plain Colour Pvc Sheet To Be Fitted In The Ms Frame Welded/ Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Jointed Together With Solvent Cement Complete All As Specified And Directed. 83 S&F Ptmt Butt Hinges, 100 Mm Long And Fixed With Steel Screws, Complete All As Specified And Directed 84 S&F Ptmt Tower Bolts, 150 Mm Long And Fixed With Steel Screws, Complete All As Specified And Directed 85 S&F Ptmt Door Handle, 150 Mm Long And Fixed With Steel Screws, Complete All As Specified And Directed 86 S&F Factory Made Double Rebate Box Type Side Hung Steel Window With Glazed And Mesh Shutters With Pintal Hinges & 2 Nos 150 Mm Mild Steel Tower Bolts To Each Shutter, Steel Handle With & Without Glazing Bars, One Side Two Shutters With Glazing Bars & Other Side Glazed Shutter With Glazing Bars Including 10Mm Mild Steel Guard Bars Dovetailed Or Welded And With Framed With One Shop Coat Of Zinc Chromate Primer Complete All As Specified And Shown On Drawing No Cejz/Td-06/07 & Cejz/Td-07/07. Note Wiremesh & Glass Will Be Measured Separtely. 87 S&F Factory Made Box Type Steel Ventilator With With Glazing Bars Dovetailed Or Welded And With One Shop Coat Of Zinc Chromate Primer, Complete All As Specified And Directed 88 Hacking Out Old Broken Glass (Any Thickness, Size, Quality Or Description) From Wooden/ Steel Frames, Glazed With Putty Or Fixed With Beads Complete All As Specified And Directed 89 S&F 3 Mm Thick, Plain Sheet Glass Ordinary Quality And Glazing, With Oil Putty Or With Wooden Beads, In Squares N.Exc 0.50 Sqm In Each, Complete All As Specified And Directed 90 S&F 4.00 Mm Thick Figured Glass Pin Headed Type, And Glazing With Oil Putty In Square N Exc 0.50 Sqm In Each Pane Complete All As Specified And Directed 91 S&F Stainless Steel Wire Cloth 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture Not More Than 1.18 Mm And Fixed With Stainless Steel Wire Staples Complete All As Specified And Directed 92 S&F In Repairs Stainless Steel Wire Cloth 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture Not More Than 1.18 Mm And Fixed With Stainless Steel Wire Staples Complete All As Specified And Directed 93 M&L Applying Two Coats Of Synthetic Enamel Paint On New Steel Surfaces Of Any Description, Over 10Cm Width Or Girth, Complete All As Specified And Directed 94 S&F Framed Work Such As Grills, Gratings Etc With End Of Bars Shouldered And/ Or Riveted,Or Forged Into Spikes; Framed Guard Bars;Barred Iron Doors;Ladders; Framed Balusters; Walk Ways;Railings; Frame Work Of Water Tanks And Similar Work Con-Forming To Fe-290.Gde-E-165 Complete All As Specified And Directed 95 S&F In Repairs Decorative Mild Steel Coloured Curtain Rod Of 20 Mm Dia Pvc Coated Approved Pattern & Design Including Side Cups, Powder Coated Mild Steel Flat Iron Brackets Fixed With Steel Screws & Pvc Rawl Plugs, Complete All As Specified And As Directed 96 Dismantling Asbestos Cement (Corrugated, Semicorrugated, Etc.) Sheets In Roof Coverings, Complete All As Specified And Directed 97 S&F Pre Painted Galvalume Aluminum Zink Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws, Complete All As Specified And Directed 98 Dismantling Boarding, Any Description, Fixed In Any Position With Screws Complete All As Specified And Directed 99 S&F 14-16 Mm Thick Solid Pvc Board Plain Colour Fixed With Screws Or Adhesive With Complete Accessories As In Shutters & Shelves. Complete All As Specified And Directed 100 S&F 100Mm Long Hasp And Staple, Safety Type, Aluminium Anodised Including Bolt To Hinge Plate And Fixed With Screws And Fixed Complete All As Specified And Directed 101 Continous (Piano) Hinges Of Mild Steel Bright Finish Or Electro Galvanised With Flap (When Open) 30Mm,Fixed With Steel Screw, Complete All As Specified And Directed
|
