|
Covers For Ironing Tables Made Of Heat-Resistant Cotton Or Mixed Fabric With Non-Stick Impregnation, With A Multi-Layer Structure (Top Heat-Resistant Layer, Intermediate Vapor-Permeable And Shock-Absorbing Layer Of Felt Or Foam Rubber, Bottom Vapor-Permeable Layer), Designed For Operating Temperatures Up To 200–220 °C And Constant Exposure To Steam And Vacuum, Mandatory Equipment With A Fixation System (Cord, Elastic Band Or Fastening Clips) For Secure Installation On The Table., The Temperature Sensor For The Primus I-330 Calender Is Used To Control The Heating Of The Heating Cylinder And Maintain The Specified Temperature Regime, It Is A Thermocouple (Type K) Or A Pt100 Thermistor With A Measuring Range Of 0–200°C And An Accuracy Of ±1–2°C, Equipped With An Output Signal In The Form Of Mv (Thermocouple) Or Resistance (Pt100), Made In A Protective Tube Made Of Stainless Steel With A Threaded Or Flange Mounting, Designed For Operation In Climatic Modification Uhl4 (Temperature –25...+40°C, Humidity Up To 80%)., Drum Position Sensor. The Door Lock For The Electrolux Wb6-27 Barrier Washing Machine Is Designed For Mechanical And Electrical Fixation Of The Loading Door During Washing And Spinning, Provides, Operates From A Control Voltage Of 220–230 V, Has Built-In Position Signal Contacts (No/Nc) For Transmitting Status To The Controller, Is Made In A Metal Case With A Protection Class Of At Least Ip54, Designed For Intensive Industrial Use And Ambient Temperatures Up To +50 °C., The Electrolux Ic44825 Calender Tension Shaft Is Designed To Ensure Uniform Tension And Correct Centering Of The Belt (Ironing Cloth) In The Working Area, Is Made Of Structural Steel With Precision Machining Of The Journals For Bearings, Has A Cylindrical Shape With Seats For Supports And A Tension Adjustment Mechanism, Is Designed For Continuous Industrial Operation At Ambient Temperatures Up To +50 °C And Exposure To Couple., A Chemical Cleaner For Irons Is Designed To Remove Scale And Burnt Marks From The Internal Steam Channels; It Is Required In The Form Of A Liquid., Radial Single-Row Ball Bearing With A Metal Protective Washer (Designation Z - One Metal Protection, 2Z - Two), Designed For Operation In Units With Moderate Radial Load And Average Rotation Speed; Main Dimensions: Inner Diameter 10 Mm, Outer Diameter 30 Mm, Width 9 Mm, Rated Dynamic Load Capacity About 5 Kn, Static Load Capacity About 2 Kn, Maximum Rotation Speed Up To 20,000 Rpm (Depending On Lubrication), Operating Temperature Of The Standard Version From −20 °C To +120 °C., Electromagnetic Valve For Ironing Table Electrolux Fit 2B. Voltage 220–230 V Ac, Designed For Operating Pressure Up To 6–10 Bar, Has A Brass Or Stainless Steel Body With A ″1/2″ Threaded Connection, Normally Closed Version (Nc), A Coil With A Protection Class Of At Least Ip65 And Temperature Resistance Up To 120–180 °C For Working With Steam., Receiving Belts For The Electrolux Ic44825 Calender Are Designed For Feeding And Transporting Linen Through The Ironing Zone And Removing It After Leaving The Heating Cylinder, Made Of Heat-Resistant Polyester Or Aramid Fabric With High Tensile Strength And Resistance To Constant Exposure To Temperatures Up To 180–200 °C, Steam And Mechanical Friction, Closed (Seamless) Or Connected With A Mechanical Lock Design, Width And Length Are Selected According To The Working Width Of The Machine (About 2500 Mm)., The Electromagnetic Starter Is Designed For Remote Starting, Stopping And Reversing Three-Phase Asynchronous Electric Motors And Other Loads In Ac Networks; Rated Operating Current In Application Category Ac-3 At 380/400 V Is 95 A, Rated Power Circuit Voltage Is Up To 660 V, Control Coil Voltage Is 230 V Ac With A Frequency Of 50 Hz; Has Three Main Power Contacts And One Auxiliary Make And One Break Contact (1No+1Nc), Designed To Control Electric Motors With Power Up To 45 Kw At 380/400 V, Rated Insulation Voltage - 690 V, Pulse Withstand Voltage - Up To 6 Kv, Mechanical Wear Resistance - At Least 10 Million Cycles, Electrical - At Least 1 Million Cycles (Ac-3); Installation Is Carried Out On A Panel With Screw Connection Of Conductors, Degree Of Protection Ip00, Climatic Version Uhl4 Ensures Operation In Enclosed Spaces At Temperatures From −25°С To +40°С And Relative Humidity Up To 80%, Hose For Ironing Tables. The Hose Is Designed For Transporting Steam In Industrial Systems, Made Of Silicone With Textile Or Metal Cord, Internal Diameter From 6 To 9 Mm, Operating Pressure From 6 To 20 Bar And Temperature From +150–180 °C), Clamp Connection., The Bearing For The Electrolux Wb6-27 Barrier Washing Machine Is Designed To Support And Rotate The Drum; A Set Of Two Angular Contact Ball Bearings Is Used, Designed For High Radial And Axial Loads At Spin Speeds Up To 1000 Rpm, Made Of Hardened Bearing Steel Resistant To Moisture And Temperatures Up To 120–150°C., The Drum Seal For The Electrolux Wb6-27 Barrier Washing Machine Is Designed To Seal The Shaft Assembly And Prevent Water And Detergents From Entering The Bearing Assembly, Made Of Wear-Resistant Rubber (Nbr Or Viton) With Metal Reinforcement And A Spring Pressure Ring, Designed To Operate At Temperatures Up To 90–120 °C And High Spin Speeds, Resistant To Moisture And Laundry Chemicals., Photoelectric Sensor For Calender, Industrial Irons For Ironing Tables Imesa And Electrolux Fit 2B With A Steam Generator Or Central Steam System, Have An Aluminum Or Stainless Steel Soleplate With Uniform Steam Distribution, A Built-In Electric Steam Supply Valve And A Thermostat For Temperature Control, Operate On A Voltage Of 220–230 V, Are Designed For A Steam Pressure Of 3–5 Bar And A Soleplate Temperature Of Up To 180–200 °C, Equipped With A Heat-Resistant Steam Hose And Safety Handle For Safe Operation., Drive Belts For The Electrolux Wb6-27 Barrier Washing Machine Are Designed To Transmit Torque From The Electric Motor To The Drum; Industrial-Grade Poly-V-Belts With Cord Reinforcement Are Used, Made Of Wear-Resistant Rubber, Resistant To Moisture And Temperatures Up To 80–100 °C, Designed For High Loads And Long-Term Operation At Spin Speeds Up To 1000 Rpm., Feeding Belts For The Electrolux Ic44825 Calendar Are Designed For Uniform Feeding Of Linen Into The Ironing Zone And Its Movement To The Heating Cylinder, Made Of Heat-Resistant Synthetic Fabric (Polyester, Nomex Or Aramid Fiber) With High Tensile Strength And Resistance To Temperatures Up To 180–200 ° C, Steam And Mechanical Wear, Have A Closed Or Connected Mechanical Lock Design, Width And Length Are Selected According To The Working Width Of The Calender (About 2500 Mm)., The Iron Stand Is Designed For The Safe Placement Of An Industrial Or Household Iron During Operation And Pauses, Made Of Heat-Resistant Plastic With Silicone Inserts, Contact Temperature Up To 200–250 °C, Must Have A Spring Holder, A Limiting Edge Or Attachment To The Ironing Table, The Heating Element For The Electrolux Wb6-27 Barrier Washing Machine Is Designed To Heat Water In The Machine Tank During Washing Programs, It Is A Tubular Electric Heating Element Made Of Stainless Steel With A Flange Mount And A Sealing Gasket, Designed To Operate In An Aqueous Environment With Detergents At Temperatures Up To 90–95 °C, Operates On A Voltage Of 380 V And Has A Power Of About 6–12 Kw Depending On The Modification Of The Machine, Equipped With Terminal Pins For Connecting Power And Can Be Equipped With A Temperature Sensor Or Overheat Protection., The Heating Element For The Ambria Ironing Table Boiler Is A Tubular Electric Heating Element Designed For Heating Water In Storage Water Heaters, Made Of A Copper Or Stainless Tube With A Magnesium Anode (Depending On The Design), Operates At A Voltage Of 220–230 V, Power 1.5–2.5 Kw, Equipped With A Flange Mount, Curved Shape, Designed For Operating Water Temperatures Up To 75–90 °C., The Primus I-330 Calender Bearing Is Used In The Heating Roller Support Unit And, As A Rule, Is A Reinforced Radial Ball Or Spherical Roller Bearing With An Internal Diameter Of Approximately 50–80 Mm And An Outer Diameter Of 90–140 Mm, Designed To Operate At Elevated Temperatures Up To 120–150°C Using Heat-Resistant Lubricant.
|
