Tenders Are Invited For Modernization Of The Water Treatment Plant In Pokrytki As Part Of The Task Moderniza ... in Poland

Work Detail

The Subject Of The Contract Will Be Co-Financed From The European Regional Development Fund Under The European Funds For Mazovia 2021-2027 (Hereinafter: Fema) Priority European Funds For The Green Development Of Mazovia, For The Water And Sewage Management Measure, No. Fema.02.05-Ip.01-047/241. The Subject Of The Investment Is The Construction Of A Reserve Water Tank With The Necessary Infrastructure On The Plot Marked With Registration Number 370/2, Located Within 0011-Pokrytki, Strzegowo Commune. Characteristic Parameters Of The Building: Reserve Water Tank:: Height: 10.25 M Diameter: 4.62 Mm Building Area: 25.00 M2 Capacity: 150M3 Tank Structure Cylindrical Vertical Water Tank With A Total Capacity Of 150M3, Constructed Of Hot-Dip Galvanized Steel Sheets. The Tank Sheets Are Connected With Screws, The Shape Of Which Prevents Damage To The Internal Pvc Foil. The Tanks Sheet Metal Structure Is Reinforced With Profiled Angles. The Tank Is Made Of Galvanized Sheet Metal And Other Materials Resistant To Water And Weather Conditions. Tank Designed To Store Water At Temperatures Up To 40Oc. The Tank Is Insulated With 100 Mm Thick Mineral Wool Boards. The Roof And Hatch Are Insulated With 100Mm Thick Polystyrene Boards. The Roof Is Equipped With An Inspection Hatch And A Working Platform With A Protective Barrier. The Tank Has A Steel Ladder That Allows Access To The Tank Roof And The Inspection Hatch. The Tank Is Placed On A Reinforced Concrete Slab And Attached To It With Expansion Anchors. The Tank Is Sealed With Thick Pvc Foil. 1.50 Mm, Which Is Subjected To A Tightness Test After Installation. The Tank Is Equipped With A Discharge Port Dn200, A Suction Port Dn200, A Drain Port Dn200, An Overflow Port Dn200. Material Solutions. Spare Water Tank With Dimensions (Diameter X Height) 4.62 M X 10.25 M, Usable Capacity 150 M³. Coat – Made Of Sheet Metal 2500X1250mm And 2500X625mm. The Tank Shell Was Topped With Rings Made Of Rolled Edge Angle 60X60x6mm Supporting The Roof Structure. Stiffening Ring Angles - Galvanized. An Isosceles Angle 60X60x6mm Is Used At The Base Of The Shell, Enabling The Tank To Be Anchored To The Foundation Slab With M16x140 Steel Anchors. The 10.25M High Tank Consists Of Six Rows Of Sheet Metal. The Sheets Were Connected Together With M12 Class 8.8 Screws. S350gd+Z275 Construction Sheet Metal Was Used For The Jacket. The Tank Roof Is Based On Beams Made Of Cold-Bent Z-Shaped Profiles. The Beams Are Supported On The Structural Sheet Using A 10 Mm Thick Flat Bar, Which Is Screwed With M12 Screws To An L60x60x6 Isosceles Angle. Roof Hatch - Made Of Isosceles Angle L45x45x5. Roof Structural Elements - Galvanized Or Protected Against Corrosion. Anti-Corrosion Protection. The Basic Anti-Corrosion Protection Of Tank Elements In Direct Contact With The Stored Medium Is Galvanization. Foundation For The Tank. A Foundation With External Dimensions Of 5.0 X 5.0 M Is Designed With A Bottom Installation Approach For A Steel Retention Tank Ma

Contact Information