|
1 1/2 Inch Polyethylene Adapter - Adapter Made Of High-Resistance Polyethylene, With A Nominal Diameter Of 1 1/2”, Intended For Connecting Conduits Or Pipes, Resistant To Impacts, Humidity And Weather, Suitable For El Installations, Pre-Formed Handle 25 Mm:, Pre-Formed Handle 35 Mm, Pre-Formed Handle 16 Mm, Galvanized Wire 16Mm: Low Carbon Steel Wire, With A Diameter Of 16 Mm And Zinc Coating (Galvanized) For High Resistance To Corrosion, Rex Frame: Heavy Rex Framerex Type Frame, Made Of Galvanized Steel, Heavy Model, Intended For Supporting Insulators And Conductors In Overhead Distribution Networks, Resistant To Mechanical Stresses And Weathering, Of Equal Or Superior Quality, 1/2 Inch Galvanized Flat Washer: Heavy Rex Frame, Rex Type Frame, Grounding Bucket + Cap: Set For Grounding System Composed Of Inspection Box (Bucket) And Its Respective Closing Cap. The Bucket Is Made Of High-Resistance Plastic (Polyvinyl Chloride). - Pvc Or Similar) And Fe Cap, 1/2 Galvanized Threaded Bar, 1 1/2 Inch Aluminum Head: Head Made Of Aluminum, With Nominal Diameter Of 1 1/2 Inches, Used For Protection And Finishing Of Conduit Entries, Corrosion Resistant, Of Equal Or Superior Quality., Cm2 Box - Cemig Standard: Energy Measuring Box Cemig Standard Electrical Type Cem2, Made Of Weather-Resistant Material, Suitable For Installing Meters In Two-Phase Systems, According To Concessionaire Standards, Or Technical Equivalent., Cdp 70 Drilling Connector - Cdp Type Connector, Nominal Capacity 70 Mm², Used For Electrical Connection Of Conductors, Guaranteeing Safe And Safe Electrical Contact Efficient, 90 Degree Bend For 3/4 Conduit: Bend For Conduit, 90 Degree Angle, Nominal Diameter Of 3/4 Inches, Made Of Resistant Material, Used For Changes Of Direction In Electrical Installations, Bimetallic Clamp With 1 Screw 06 To 70Mm: Metallic Clamp With Fixation By A Screw, Used For Anchoring And Fixing Conductors Or Electrical Components, With Adequate Mechanical Resistance, Angle Rod For Grounding With Connector: Angle Type Grounding Rod, Accompanied By An Appropriate Connector, Intended For The Execution Of Electrical Grounding Systems, Sleeve For Conduit Polyethylene 1 1/2 Inch: Splicing Sleeve For Conduit, Nominal Diameter 1 1/2 Inches Used For Joining Conduits, Pre-Fabricated Electrical Standard Height 5 Meters - Pre-Fabricated Electrical Power Input Standard, Two-Phase Type 127/220 V, Installation Against The Grid, With Overhead Output, Built In Accordance With Cemig Concessionaire Standards And Specifications. Consisting Of P, Two-Phase Pre-Fabricated Electrical Power Input Standard 127/220 V – Against The Mains – Height 7 Mpre-Fabricated Electrical Power Input Standard, Built According To Standards And Specs, Bushing With 2 ½ Inch Washer: Set Composed Of Bushing And Metal Washer, Nominal Diameter Of 2 1/2 Inches, Used For Structural Fixings, With Anti-Corrosion Protection, Bushing With 2 ¾ Inch Washer: Set Bushing And Metal Washer, Nominal Diameter Of 2 3/4 Inches, Intended For Mechanical Fixings In Electrical Structures, Chip Screw 4.0 X 40, Galvanized Screw 1/2
|
