|
Supply Of gauge for shank body , gauge for shank body - 39 mm, required size: nogo-36.0 mm (snap type) ref. drg. no. rd so sk 79063 alt-4 & sk 99007 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibrati on certificate - valid for min. 01 year issued from nabl approved lab or similar accreditation board. [ war ranty period: 30 months after the date of delivery ] ] , gauge for 155 mm draft key slot. wear limit - 9 mm. required size: nogo - 164.0 mm (sna p type) ref. drg. no. rdso sk 79063 alt-4 & sk 99007 material - tool steel, is 3748/90 hardness - 50/55 h rc. supply with calibration certificate - valid for 01 year issued from lab approved from nabl or similar ac creditation board. [ warranty period: 30 months after the date of delivery ] ] , gauge for draft key slot width - 38 mm, required size: nogo-40.0 mm (flat type) ref. drg. no. rdso sk 79063 alt-4 & sk 99007 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with c alibration certificate - valid for min. 01 year issued from nabl approved lab or similar accreditation board. [ warranty period: 30 months after the date of delivery ] ] , gauge for 62 mm dia pin hole of draw hook. required size - nogo - 65.0 mm (flat type) ref . drg. no. rdso sk 79062 alt-05 & 99007 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply wi th calibration certificate - valid for min. 01 year issued from nabl approved lab or similar accreditation bo ard. [ warranty period: 30 months after the date of delivery ] ] , gauge for bottom side of shank - 56 mm height draw hook, required size: nogo - 41.0 mm (snap type) ref. drg. no. rdso sk 79062 alt-05 & 99007 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab or similar a ccreditation board. [ warranty period: 30 months after the date of delivery ] ] , gauge for draft width. required size: nogo - 40.0 mm (flat type) ref. drg. no. rdso sk 79 062 alt 05 & 99007 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab or similar accreditation board. [ warran ty period: 30 months after the date of delivery ] ] , plug gauge (go & nogo) for draw hook opening. required size - go - 46.0 mm & nogo - 5 3.0 mm ref. drg. no. rdso sk 79062 alt-05 & 99007 material - tool steel, is 3748/90 hardness - 50/55 hr c. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab or similar accreditation board. [ warranty period: 30 months after the date of delivery ] ] , gauge (go & nogo) for bent link u-gap - 78 mm (gauge for screw coupling) required size: go - 77 mm & nogo - 85 mm ref. drg. no. rdso - sk - 79068 alt-08 & sk - 99002 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nab l approved lab or similar accreditation board. [ warranty period: 30 months after the date of delivery ] ] , gauge for pin on draw hook. required size: nogo - 58 mm (snap type) ref. drg. no. rdso - sk -79068 alt-08 & sk - 99002 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibrati on certificate - valid for 01 year issued from lab approved from nabl or similar accreditation board. [ war ranty period: 30 months after the date of delivery ] ] , thread profile ring gauge (go - 01 no. & nogo - 01 no.), required size: m39 x 3 mm (exter nal), wear limit - 1mm ref. drg. no. rdso sk 79063 alt-4 & sk 99007 material - tool steel, is 3748/90 har dness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved l ab or similar accreditation board. [ warranty period: 30 months after the date of delivery ] ] , profile gauge with - 15 mm. adjustable projection for root of the hook near the point of conta ct with bent link (gauge for draw hook). ref. drg no. rdso - sk - 79062 alt-05 & 99007. material tool stee l. is - 3748/90, hardness - 50 / 55 hrc supply with calibration certificate - valid for 01 year issued from la b approved from nabl or similar accreditation board. [ warranty period: 30 months after the date of deli very ] ] , gauge for buffer spindle body. dia - 40 mm. wear limit - 5 mm. required size: nogo - 35.00 mm (snap type) ref. drg. no. w/bd - 353 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply wi th calibration certificate - valid for 01 year issued from lab approved from nabl or similar accreditation bo ard. [ warranty period: 30 months after the date of delivery ] ] , thread profile gauge external (go & nogo) size - 39 x 3 mm (ring gauge). wear limit - 0.5 mm. ref. drg. no. w/bd - 353 material - tool steel/ stainless steel & hardened supply with calibration certificate - valid for 01 year issued from lab approved from nabl or similar accreditation board. [ warra nty period: 30 months after the date of delivery ] ] , gauge for buffer plunger tube wall thickness 9 mm. wear limit - 4 mm. required size: nogo - 5.0 mm (snap type) ref. drg. no. w/bd - 355 & 359 and sk 94255 & sk 94256 material - tool steel, is 37 48/90 hardness 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl ap proved lab or similar accreditation board. [ warranty period: 30 months after the date of delivery ] ] , gauge for plunger face/ face plate 19 mm. wear limit - 11 mm. required size - 1905 mm cur vature gauge with depth measurement ref. drg. no. w/bd - 355 & 359 and sk 94255 & sk 94256 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year iss ued from nabl approved lab or similar accreditation board. [ warranty period: 30 months after the date of delivery ] ] , gauge for trunnion 76 mm thickness. required size - nogo - 72 mm (snap type) ref. drg. n o. rdso- sk - 79068 alt-08 & sk - 99002 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply wit h calibration certificate - valid for min. 01 year issued from nabl approved lab or similar accreditation bo ard. [ warranty period: 30 months after the date of delivery ] ] , gauge for 46 mm dia pin. required size - nogo - 44.0 mm (snap type) ref. drg. no. rdso - sk 79068 alt-08 & sk - 99002 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab or similar accreditation boar d. [ warranty period: 30 months after the date of delivery ] ] , gauge for hole on straight link. 61 mm dia hole. required size - nogo - 63.0 mm (flat type ) ref. drg. no. rdso - sk - 79068 alt-08 & sk - 99002 material - tool steel, is 3748/90 hardness - 50/55 hr c. supply with calibration certificate - valid for 01 year issued from lab approved from nabl or similar acc reditation board. [ warranty period: 30 months after the date of delivery ] ] , gauge for hole on straight link. 47 mm dia hole. required size - nogo - 49.0 mm (flat type ) ref. drg. no. rdso - sk - 79068 alt-08 & sk - 99002 material - tool steel, is 3748/90hardness - 50/55 hrc. supply with calibration certificate - valid for 01 year issued from lab approved from nabl or similar accreditation board. [ warranty period: 30 months after the date of delivery ] ] , gauge for bent link stem. dia - 42 mm. required size - nogo - 39.0 mm (snap type) ref. dr g. no. rdso - sk - 79068 alt-08 & sk - 99002 material - tool steel, is 3748/90 hardness - 50/55 hrc. suppl y with calibration certificate - valid for 01 year issued from lab approved from nabl or similar accreditatio n board. [ warranty period: 30 months after the date of delivery ] ] , k- thread profile gauge (ring gauge type) for screw. size - 55 x 6.35 mm - k/thread. go & n ogo gauge. wear limit - 1 mm ref. drg. no. rdso - sk - 79068 alt-08 & sk - 99002 material - stainless ste el & hardened. supply with calibration certificate - valid for 01 year issued from lab approved from nabl or similar accreditation board. [ warranty period: 30 months after the date of delivery ] ] , k- thread profile gauge (plug gauge type) for trunnion - lh/rh. size - 55.635 x 6.35 mm - d/ thread. go & nogo gauge. wear limit - 1 mm ref. drg. no. rdso - sk - 79068 alt-08 & sk - 99002 materia l - stainless steel & hardened. supply with calibration certificate - valid for min. 01 year issued from nabl approved lab or similar accreditation board. [ warranty period: 30 months after the date of delivery ] ] , feeler gauge required size: 0.80 mm (+0.00/ -0.10 mm)material - tool steel, is 3748/90 har dness - 50/55 hrc. supply with calibration certificate valid for min. 01 year issued from nabl approved la b [ warranty period: 30 months after the date of delivery ] ] , feeler gauge required size: 1 mm material - tool steel, is 3748/90 hardness - 50/55 hrc. su pply with calibration certificate valid for min. 01 year issued from nabl approved lab or similar accreditati on board. [ warranty period: 30 months after the date of delivery ] ] , feeler gauge required size: 2 mm material - tool steel, is 3748/90 hardness - 50/55 hrc. su pply with calibration certificate valid for min. 01 year issued from nabl approved lab or similar accreditati on board. [ warranty period: 30 months after the date of delivery ] ] , feeler gauge required size: 3 mm material - tool steel, is 3748/90 hardness - 50/55 hrc. su pply with calibration certificate valid for min. 01 year issued from nabl approved lab or similar accreditati on board. [ warranty period: 30 months after the date of delivery ] ] , feeler gauge required size: 4 mm material - tool steel, is 3748/90 hardness - 50/55 hrc. su pply with calibration certificate valid for min. 01 year issued from nabl approved lab or similar accreditati on board. [ warranty period: 30 months after the date of delivery ] ] , gauge for draft key slot - 159 mm, required size: nogo - 173.0 mm (flat type) ref. drg. no . rdso sk 79062 alt-05 & 99007 material - tool steel, is 3748/90 hardness - 50/55 hrc. supply with calibr ation certificate - valid for min. 01 year issued from nabl approved lab or similar accreditation board. [ w arranty period: 30 months after the date of delivery ] ]
|
