Bids Are invited for Procurement Of Godrej Make Furniture For Ongoing Renovation Work Of Ground Floor And Th ... in India

Work Detail

Bids Are invited for Procurement Of Godrej Make Furniture For Ongoing Renovation Work Of Ground Floor And Third Floor - Modular Workstation Size 1200X 600 X Ht 1200 With Kbpt,Pedestal And Cpu Torlley.Providing And Placing Panel & Tile Based Modular Workstation, With Thickness As 52.4 Mm Thk And Ht - 1200 Including Powder Coated Aluminium Trims.Tiles: Combination Of Top Tiles Are Fabric Magneitc/Fabric/Fabric Tackable/White Board/Glass Writing Board/ Clear Glass Tile/ Plain Metal/ Prelam Tile. Bottom Tiles - Plain Metal/ Fabric Magnetic/Fabric/Laminated/Prelam.Split Tiles: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Split Fabric Magnetic/Fabric Tackable/White Board/Prelam/ Plain Metal Along With Split Fabric Magnetic/Fabric Tackable/White Board/Prelam/ Plain Metal. Intermediate Blocks Intermediate Blocks Are Given In Fabric/Dl + Fabric/Dl Finsh.Wire Management - Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks.Full Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Clear Glass/Fabric Tackble /Laminate/White Board Finsh.Side Panels Or Legs - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Considered Only On The Open End Conditions Or Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look.Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1200 Mm W X 600 Mm D.Cpu Trolley - With Castors.Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. , The Cushioned Seat Assembly Shall Consists Of Seat Outer(Material-30% Glass Fiber Nylon) And Upholstered Seat Inner(Material-Polypropylene) With Moulded Polyurethane Foam And Polyster Fabric. The Net Back Should Made Up Of Back Outer(Material-Glass Fiber Filled Nylon) And Back Inner(Material-Pp) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Size Of Back Shall Be (W)-46.5Cm, (H)-60.0Cm & Size Of Seat Shall Be (W)-51.0Cm X (D)-49.0Cm. The Supprot Spine Should Made Up Of High Pressure Die Cast Polished Aluminium. Armrest Is Having Two Adjustment, Height(6+/-0.5Cm) And Depth(6+/-0.5Cm). Height Adjustment Shall Be Provided In Aluminium Structure Of Armrest Which Is Connected To Aluminium Back Spine And Is Operated With Button. Armtop Is Made Up Of Pu Molded Over Plastic Inner. The Mechanim Shall Be Active Bio Synchro Mechanism. The Mechanism Of Chair Shall Have Following Features:360 Degree Revolving Type, Seat/Back Tilt Ratio Of 1:2, Active Bio-Synchro Mechanism, 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Front-Pivot For Tilt With Feet Resting On Ground And Continious Lumber Support Should Ensure More Comfort. The Mechanism Housing Should Made Up Of Hpdc Aluminium And Black Powder Coated. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 10.0 +/- 0.3 Cm. The Pedestal Shall Be Made Of Die-Cast Polished Aluminium. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 65.0 +/- 0.5 Cm Pitch-Centre-Dia (75.0 +/- 1.0 Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Polypropylene. The Lumbar Support Assembly Should Consists Of Lumber Spine(Material-Glass Fiber Filled Nylon) Which Is Fixed To Aluminium Back Spine. Overall Dimensions Of Chair Shall Be, Width Of Chair - 70.5Cm, Depth Of Chair - 70.5 Cm As Measured From Pedestal Below. Height From Ground - 99 Cm. Seat Height - 49 Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. , Providing And Placing Panel & Tile Based Modular Workstation Of Table Size 1500Mm(L)X750mm(D), With Partition Thickness As 52.4 Mm Thk And Ht - 1200 Including Powder Coated Aluminium Trims.Tiles On Main Spine: Combination Of Top Tiles Are Fabric / Prelam Intermediate Blocks Are Given In Dl + Dl Finsh, Bottom Tile Are Given Of Metal.Wire Management - Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks.Modesty Panels With Assembly Leg - 25 Mm Thk Plb Modesty Has Been Given On The Front Of The Main Worktop Which Is Attached To The Partition On One End With Leg At End Bkts And On The Other End With Metal Powder Coated Frontier Leg. Legs - Metal Powder Coated Legs At The End. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look.Worksurface - Main Table Recta Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500(W).Pedestals With Legs - Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castorskbpt Mousetray - Metal. , The Cushioned Seat Assembly Shall Consists Of Seat Outer(Material-30% Glass Fiber Nylon) And Upholstered Seat Inner(Material-Polypropylene) With Moulded Polyurethane Foam And Polyster Fabric. The Net Back Should Made Up Of Back Outer(Material-Glass Fiber Filled Nylon) And Back Inner(Material-Pp) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Size Of Back Shall Be (W)-46.5Cm, (H)-60.0Cm & Size Of Seat Shall Be (W)-51.0Cm X (D)-49.0Cm. The Supprot Spine Should Made Up Of High Pressure Die Cast Polished Aluminium. Armrest Is Having Two Adjustment, Height(6+/-0.5Cm) And Depth(6+/-0.5Cm). Height Adjustment Shall Be Provided In Aluminium Structure Of Armrest Which Is Connected To Aluminium Back Spine And Is Operated With Button. Armtop Is Made Up Of Pu Molded Over Plastic Inner. The Mechanism Shall Be Active Biosynchro Mechanism. The Mechanism Of Chair Shall Have Following Features:360 Degree Revolving Type, Seat/Back Tilt Ratio Of 1:2, Active Bio-Synchro Mechanism, 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Front-Pivot For Tilt With Feet Resting On Ground And Continious Lumber Support Should Ensure More Comfort. The Mechanism Housing Should Made Up Of Hpdc Aluminium And Black Powder Coated. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 10.0 +/- 0.3 Cm. The Pedestal Shall Be Made Of Die-Cast Polished Aluminium. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 65.0 +/- 0.5 Cm Pitch-Centre-Dia (75.0 +/- 1.0 Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Polypropylene. The Lumbar Support Assembly Should Consists Of Lumber Spine(Material-Glass Fiber Filled Nylon) Which Is Fixed To Aluminium Back Spine. The Neckrest Assembly Consists Of Upholstered Neckrest Inner(Material-Poly Propylene) With Moulded Polyurethane Foam And Polyster Fabric. Upholstered Inner Shall Be Fixed To Neck Rest Cover. Neckrest Shall Be Fixed To Back Assembly Through Neckrest Spline. Overall Dimensions Of Chair Shall Be, Width Of Chair - 75.0Cm, Depth Of Chair - 75.0 Cm As Measured From Pedestal Below. Height From Ground - Min 109.3 To Max 124.4 Cm. Seat Height - Min 45.5Cm To Max 55.5Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. , The Cushioned Seat Assembly Shall Consists Of Seat Outer(Material-30% Glass Fiber Nylon) And Upholstered Seat Inner(Material-Polypropylene) With Moulded Polyurethane Foam And Polyster Fabric. The Net Back Should Made Up Of Back Outer(Material-Glass Fiber Filled Nylon) And Back Inner(Material-Pp) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Size Of Back Shall Be (W)-46.5Cm, (H)-60.0Cm & Size Of Seat Shall Be (W)-51.0Cm X (D)-49.0Cm. The Supprot Spine Should Made Up Of High Pressure Die Cast Polished Aluminium. Armrest Is Having Two Adjustment, Height(6+/-0.5Cm) And Depth(6+/-0.5Cm). Height Adjustment Shall Be Provided In Aluminium Structure Of Armrest Which Is Connected To Aluminium Back Spine And Is Operated With Button. Armtop Is Made Up Of Pu Molded Over Plastic Inner. The Mechanim Shall Be Active Bio Synchro Mechanism. The Mechanism Of Chair Shall Have Following Features:360 Degree Revolving Type, Seat/Back Tilt Ratio Of 1:2, Active Bio-Synchro Mechanism, 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Front-Pivot For Tilt With Feet Resting On Ground And Continious Lumber Support Should Ensure More Comfort. The Mechanism Housing Should Made Up Of Hpdc Aluminium And Black Powder Coated. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 10.0 +/- 0.3 Cm. The Pedestal Shall Be Made Of Die-Cast Polished Aluminium. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 65.0 +/- 0.5 Cm Pitch-Centre-Dia (75.0 +/- 1.0 Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Polypropylene. The Lumbar Support Assembly Should Consists Of Lumber Spine(Material-Glass Fiber Filled Nylon) Which Is Fixed To Aluminium Back Spine. Overall Dimensions Of Chair Shall Be, Width Of Chair - 70.5Cm, Depth Of Chair - 70.5 Cm As Measured From Pedestal Below. Height From Ground - 99 Cm. Seat Height - 49 Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. , Supplying Of Storage Unit Of Officers Having Dimension 1200Wx 450Dx 1219H:Overall Size Of Hinge Door Unit Is 1200Mmx1219mm (H)X450 Mm (D).Back Panels: 9Mm White Plt Boardside, Bottom : 18Mm Plb With 0.8Mm Pvc Edgeband Top Panel: 18Mm Plb With 0.8Mm Pvc Edgeband For 1219H Unitsshelf & Separator Panels (If Any) : 18Mm Plt Board With 0.8Mm Pvc Edgeband Bottom Shelf Is Fixed & Other Shelves Have 1 Step Adjustment For Optimizing Space.Hdu: 18Mm Plb With With Edgeband, Suitable Hinges Are Provided.Top And Bottom Panels.Handle: Aluminium Handle For Both Hdu & Sduready To Assemble Unit And Is Assembled With Suitable Kd Fittings , Supplying Of Storage Unit Of Officers Having Dimension 900Wx 450Dx 1219H:Overall Size Of Hinge Door Unit Is 900Mmx1219mm (H)X450 Mm (D).Back Panels: 9Mm White Plt Boardside, Bottom : 18Mm Plb With 0.8Mm Pvc Edgeband Top Panel: 18Mm Plb With 0.8Mm Pvc Edgeband For 1219H Unitsshelf & Separator Panels (If Any) : 18Mm Plt Board With 0.8Mm Pvc Edgeband Bottom Shelf Is Fixed & Other Shelves Have 1 Step Adjustment For Optimizing Space.Hdu: 18Mm Plb With With Edgeband, Suitable Hinges Are Provided.Top And Bottom Panels.Handle: Aluminium Handle For Both Hdu & Sduready To Assemble Unit And Is Assembled With Suitable Kd Fittings , Providing And Placing In Position Meeting Table. Size 4200Mmx 1500Mmx 740Mm. Worktop Shall Be Made From 25Mm Thick Mdf One Side Prelaminate Board With 0.4Mm Pvc Membrane Pressed On To Top And Having Chamfered Edge. Soft Closing Dual Access Flap Provided For Access To Power Supply And Data Cables. The Under-Structure Consists Of Mixture Of 25Mm And 18Mm Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Anodised Aluminium Alloy 63400 - Wp Profile Is Added At Bottom Edges For Improving The Aesthetics.The Product Has A Knock-Down Construction. A Wire Raiser Made Of 0.8Mm Crca Ms Is:513. It Is Epoxy Polyester Powder Coated (Dft 40-60 Microns) For Flow Of Wires And Cables. A Power Box With 2 Cutouts On Either Sides For Standard 8 Module Anchor Roma Is Provided. Beside Each Cutout, An Additional Cutout With Plate Is Provided For Mounting Audio Visual Cables(Eg. Hdmi,Vga-A,Etc). The Product Must Be Ul Greenguard Certified.Complete All As Per The Direction Of Engineer In Charge. , Providing And Placing In Position Mid Back Chair. The Overall Dimensions Shall Be 76.1Cm X 76.1Cm X 96.5-114Cm. Seat Height Shall Be 44.5Cm - 54.5Cm. The Cushioned Seats Shall Be Made Of Injection Moulded Plastic Outer And Inner. Plastic Inner Shall Be Upholstered With Pure Leather And Moulded High Resiliance Polyurethane Foamof Density = 45±2 Kg/M³, And Hardness Load 16±2 Kgf As Per Is:7888 For 25% Of Compression. Seat Size Shall Be 47.6 Cm W X 49.2 Cm D. The Back Shall Be Cushioned And Shall Be Made Up Of Pu Foam With Insitu Moulded Ms Erw Round Tube Of Size 1.9±0.03 Cm X 0.16±0.0128 Cm, Upholstered With Pure Leather. The Armrest Top Shall Be Moulded From Polurethane, And Shall Be Upholstered With Pure Leather And Mounted On Ot A Drop Lift Adjustable Type Tubular Armrest Support Made Up Of Ø3.81±0.03 Cm X 0.2±0.01 Cm Thick Ms Erw Tube Having Chrome Plated Finish. The Armrest Hieght Shall Be Adjustable Upto 6.5±0.5 Cm In 5 Steps. The Adjustable Tilting Mechanism Shall Be Designed With The Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Contionuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Options Of Variable Tilt Angle To The Chair, Seat/Backtilting Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Shall Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Shall Be 6.0±0.5 Cm. Back Frame Shall Be Connected To The Up/Down Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. The Pneumatic Height Adjustment Shall Have An Adjustment Stroke Of 10±0.3 Cm. The Pedestal Shall Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Shall Be 65.0±0.5 Cm Pitch Centre Dia. 5 Nos. Of Twin Wheel Castors Shall Be Injection Moulded In Plastic Having 6.0±0.1 Cm Wheel Diameter And Assembled To Pedestal. , Providingin Place Of Main Table With Overall Size Of Table 1800 X 2100 X 750Mm. The Main Table Shall Be Of Size 1800 X 900 X 750Mm. The Side Unit Shall Be 1200 X 500 X 750Mm. The Table Is Made Of 25 Mm Thick Mdf – One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. Soft Closing Access Flap Within-Build Power Box Are Provided On Work Surface For Wire Management. The Eru Top Is Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Modesty Panel Is Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Understructure Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. The Pedestal Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board With 0.4 Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. , The Back Unit Shall Be Of Dimensions 1800 X 500 X 1800Mm. It Shall Be Made Of 25Mm Thick Mdf – One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. The Slide Door Unit Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Shutters Are Made Of 25Mm Thick Mdf One Side Pre Laminate Board With 0.4Mm Pvc Membrane Pressed On Top. Shutters Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Storage Is Provided With Lock For Security. , Providing And Placing High Back Chair With Overall Size Of 76.1 Cm W X 76.1 Cm D X 112.7 – 130.2 Cm H X 43.1 – 53.1 Cm Seat Height. The Seat Is Cushioned Seat Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Is Upholstered With Leatherette And Molded High Resilience Polyurethane Foam Of Density 45±2 Kg/M³, & Hardness Load Of 16±2 Kgf As Per Is:7888 For 25% Compression. Seat Size Is 47.0 W Cm X 48.0 D Cm. The Back Is Cushioned Made Of Pu Foam With Insitu Molded M.S. Erw Round Tube Of Size 1.9±0.03Cm X 0.16±0.0128Cm, Upholstered With Leatherette. The Back Size Is 47.7 W Cm X 76.4 D Cm. The Armrest Top Is Molded From Polyurethane And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of Ø3.81±0.03Cm X 0.2±0.01Cm Thick M.S. Erw Tube Having Chrome Plated Finish. The Armrest Is Height Adjustable Up To 6.5±0.5 Cm In 5 Steps. The Adjustable Tilting Mechanism Is Designed With Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair, Seat/Back Tilt Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Is Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Is Of 6.0±0.5Cm. Back Frame Is Connected To The Up/Down Mechanism In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Comfort The Comfortable Back Support To Suit Individual Need. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3Cm. The Pedestal Is High Pressure Die Cast Polished Aluminium & Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Is 65.0±0.5Cm Pitch Centre Dia. (75.0±1.0Cm With Castors). 5 Nos. Of Twin Wheel Castors Are Injection Molded In Plastic Having 6.0±0.1Cm Wheel Diameter And Assembled To Pedestal. , Providing And Placing High Back Chair With Overall Size Of 76.1 Cm W X 76.1 Cm D X 96.5 – 114 Cm H X 43.1 – 53.1 Cm Seat Height. The Seat Is Cushioned Seat Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Is Upholstered With Leatherette And Molded High Resilience Polyurethane Foam Of Density 45±2 Kg/M³, & Hardness Load Of 16±2 Kgf As Per Is:7888 For 25% Compression. Seat Size Is 47.0 W Cm X 48.0 D Cm. The Back Is Cushioned Made Of Pu Foam With Insitu Molded M.S. Erw Round Tube Of Size 1.9±0.03Cm X 0.16±0.0128Cm, Upholstered With Leatherette. The Back Size Is 47.7 W Cm X 76.4 D Cm. The Armrest Top Is Molded From Polyurethane And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of Ø3.81±0.03Cm X 0.2±0.01Cm Thick M.S. Erw Tube Having Chrome Plated Finish. The Armrest Is Height Adjustable Up To 6.5±0.5 Cm In 5 Steps. The Adjustable Tilting Mechanism Is Designed With Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair, Seat/Back Tilt Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Is Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Is Of 6.0±0.5Cm. Back Frame Is Connected To The Up/Down Mechanism In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Comfort The Comfortable Back Support To Suit Individual Need. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3Cm. The Pedestal Is High Pressure Die Cast Polished Aluminium & Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Is 65.0±0.5Cm Pitch Centre Dia. (75.0±1.0Cm With Castors). 5 Nos. Of Twin Wheel Castors Are Injection Molded In Plastic Having 6.0±0.1Cm Wheel Diameter And Assembled To Pedestal. , Supplying And Placing In Place Of 2 Seater Sofa. The Overall Dimensions Of The Sofa Shall Be 1460W X 905D X 855H. The Seat Should Be Made Of Pu Foam With Density 28 ± 2 Kg/Cu.Mtr Having An Additional Top Layer Of Supersoft Pu Foam With Density 32 ± 2 Kg/Cu. Seat Should Be Upholstered With Fabric Or Leatherette. 2) Back Foam: The Back Should Be Made Of Pu Foam With Density 28 ± 2 Kg/Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg/Cu. Mtr, Upholstered With Fabric Or Leatherette. Understructure Should Be Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood (Which Also Shall Be Resistance And Termite Proof As Per Is:303.) And Pinewood Of Cross Section Deviod Of Major Knots And Surface Defects 6 Nos. Per Seat And 3.8Mm Dia. Zigzag Spring Assembly Is Mounted Over Understrucrure For Cushioning Effect. It Should Be A Welded Assembly Made In Stainless Steel (Grade Ss 202) Tube & Plate With Plastic Endcap. , Modular Workstation Size 1200X 600 X Ht 1200 With Kbpt,Pedestal And Cpu Torlley.Providing And Placing Panel & Tile Based Modular Workstation, With Thickness As 52.4 Mm Thk And Ht - 1200 Including Powder Coated Aluminium Trims.Tiles: Combination Of Top Tiles Are Fabric Magneitc/Fabric/Fabric Tackable/White Board/Glass Writing Board/ Clear Glass Tile/ Plain Metal/ Prelam Tile. Bottom Tiles - Plain Metal/ Fabric Magnetic/Fabric/Laminated/Prelam.Split Tiles: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Split Fabric Magnetic/Fabric Tackable/White Board/Prelam/ Plain Metal Along With Split Fabric Magnetic/Fabric Tackable/White Board/Prelam/ Plain Metal. Intermediate Blocks Intermediate Blocks Are Given In Fabric/Dl + Fabric/Dl Finsh.Wire Management - Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks.Full Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Clear Glass/Fabric Tackble /Laminate/White Board Finsh.Side Panels Or Legs - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Considered Only On The Open End Conditions Or Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look.Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1200 Mm W X 600 Mm D.Cpu Trolley - With Castors.Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. , Supplying Of Recta Workstation Of Size 1200X 600X 750 With Kbpt , Pedestal , Cpu Trolley .Providing Desk Based Modular Workstation With Worktop Thickness 25Mm System Ht - 750 Mm .Understructure - The Slanted Legs With Perforated Metal Modesty In Between Are Connected To The Understructure With The Help Of Pdc Connectors To Provide A Stable And Sturdy Base For The Worktops. Modesty Panel Shall Be Of Metal 1.2 Mm Thick Crca. Wire Management : Metal Powder Coated Power Box With Wire Raiser+D56 Is Given To Pull Wires From The Floor Junction Box Upto The Power Box Fixed Under Neath The Worktop. Aluminium Access Flaps On Worktop Above Power Box Cut Out For Accessing Switches.Worktop Mounted Metal Modesty Made From 0.8 Mm Thk Crca (Is: 513) Is Provided.Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1200 Mm W X 600 Mm D.Pedestals - Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. .The Product Should Be Greenpro, Scs Iaq, Griha, Bifma Certified. , The Cushioned Seat Assembly Shall Consists Of Seat Outer(Material-30% Glass Fiber Nylon) And Upholstered Seat Inner(Material-Polypropylene) With Moulded Polyurethane Foam And Polyster Fabric. The Net Back Should Made Up Of Back Outer(Material-Glass Fiber Filled Nylon) And Back Inner(Material-Pp) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Size Of Back Shall Be (W)-46.5Cm, (H)-60.0Cm & Size Of Seat Shall Be (W)-51.0Cm X (D)-49.0Cm. The Supprot Spine Should Made Up Of High Pressure Die Cast Polished Aluminium. Armrest Is Having Two Adjustment, Height(6+/-0.5Cm) And Depth(6+/-0.5Cm). Height Adjustment Shall Be Provided In Aluminium Structure Of Armrest Which Is Connected To Aluminium Back Spine And Is Operated With Button. Armtop Is Made Up Of Pu Molded Over Plastic Inner. The Mechanim Shall Be Active Bio Synchro Mechanism. The Mechanism Of Chair Shall Have Following Features:360 Degree Revolving Type, Seat/Back Tilt Ratio Of 1:2, Active Bio-Synchro Mechanism, 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Front-Pivot For Tilt With Feet Resting On Ground And Continious Lumber Support Should Ensure More Comfort. The Mechanism Housing Should Made Up Of Hpdc Aluminium And Black Powder Coated. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 10.0 +/- 0.3 Cm. The Pedestal Shall Be Made Of Die-Cast Polished Aluminium. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 65.0 +/- 0.5 Cm Pitch-Centre-Dia (75.0 +/- 1.0 Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Polypropylene. The Lumbar Support Assembly Should Consists Of Lumber Spine(Material-Glass Fiber Filled Nylon) Which Is Fixed To Aluminium Back Spine. Overall Dimensions Of Chair Shall Be, Width Of Chair - 70.5Cm, Depth Of Chair - 70.5 Cm As Measured From Pedestal Below. Height From Ground - 99 Cm. Seat Height - 49 Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. , Providing And Placing Panel & Tile Based Modular Workstation Of Table Size 1500Mm(L)X750mm(D), With Partition Thickness As 52.4 Mm Thk And Ht - 1200 Including Powder Coated Aluminium Trims.Tiles On Main Spine: Combination Of Top Tiles Are Fabric / Prelam Intermediate Blocks Are Given In Dl + Dl Finsh, Bottom Tile Are Given Of Metal.Wire Management - Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks.Modesty Panels With Assembly Leg - 25 Mm Thk Plb Modesty Has Been Given On The Front Of The Main Worktop Which Is Attached To The Partition On One End With Leg At End Bkts And On The Other End With Metal Powder Coated Frontier Leg. Legs - Metal Powder Coated Legs At The End. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look.Worksurface - Main Table Recta Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500(W).Pedestals With Legs - Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castorskbpt Mousetray - Metal. , The Cushioned Seat Assembly Shall Consists Of Seat Outer(Material-30% Glass Fiber Nylon) And Upholstered Seat Inner(Material-Polypropylene) With Moulded Polyurethane Foam And Polyster Fabric. The Net Back Should Made Up Of Back Outer(Material-Glass Fiber Filled Nylon) And Back Inner(Material-Pp) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Size Of Back Shall Be (W)-46.5Cm, (H)-60.0Cm & Size Of Seat Shall Be (W)-51.0Cm X (D)-49.0Cm. The Supprot Spine Should Made Up Of High Pressure Die Cast Polished Aluminium. Armrest Is Having Two Adjustment, Height(6+/-0.5Cm) And Depth(6+/-0.5Cm). Height Adjustment Shall Be Provided In Aluminium Structure Of Armrest Which Is Connected To Aluminium Back Spine And Is Operated With Button. Armtop Is Made Up Of Pu Molded Over Plastic Inner. The Mechanism Shall Be Active Biosynchro Mechanism. The Mechanism Of Chair Shall Have Following Features:360 Degree Revolving Type, Seat/Back Tilt Ratio Of 1:2, Active Bio-Synchro Mechanism, 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Front-Pivot For Tilt With Feet Resting On Ground And Continious Lumber Support Should Ensure More Comfort. The Mechanism Housing Should Made Up Of Hpdc Aluminium And Black Powder Coated. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 10.0 +/- 0.3 Cm. The Pedestal Shall Be Made Of Die-Cast Polished Aluminium. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 65.0 +/- 0.5 Cm Pitch-Centre-Dia (75.0 +/- 1.0 Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Polypropylene. The Lumbar Support Assembly Should Consists Of Lumber Spine(Material-Glass Fiber Filled Nylon) Which Is Fixed To Aluminium Back Spine. The Neckrest Assembly Consists Of Upholstered Neckrest Inner(Material-Poly Propylene) With Moulded Polyurethane Foam And Polyster Fabric. Upholstered Inner Shall Be Fixed To Neck Rest Cover. Neckrest Shall Be Fixed To Back Assembly Through Neckrest Spline. Overall Dimensions Of Chair Shall Be, Width Of Chair - 75.0Cm, Depth Of Chair - 75.0 Cm As Measured From Pedestal Below. Height From Ground - Min 109.3 To Max 124.4 Cm. Seat Height - Min 45.5Cm To Max 55.5Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. , The Cushioned Seat Assembly Shall Consists Of Seat Outer(Material-30% Glass Fiber Nylon) And Upholstered Seat Inner(Material-Polypropylene) With Moulded Polyurethane Foam And Polyster Fabric. The Net Back Should Made Up Of Back Outer(Material-Glass Fiber Filled Nylon) And Back Inner(Material-Pp) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Size Of Back Shall Be (W)-46.5Cm, (H)-60.0Cm & Size Of Seat Shall Be (W)-51.0Cm X (D)-49.0Cm. The Supprot Spine Should Made Up Of High Pressure Die Cast Polished Aluminium. Armrest Is Having Two Adjustment, Height(6+/-0.5Cm) And Depth(6+/-0.5Cm). Height Adjustment Shall Be Provided In Aluminium Structure Of Armrest Which Is Connected To Aluminium Back Spine And Is Operated With Button. Armtop Is Made Up Of Pu Molded Over Plastic Inner. The Mechanim Shall Be Active Bio Synchro Mechanism. The Mechanism Of Chair Shall Have Following Features:360 Degree Revolving Type, Seat/Back Tilt Ratio Of 1:2, Active Bio-Synchro Mechanism, 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Front-Pivot For Tilt With Feet Resting On Ground And Continious Lumber Support Should Ensure More Comfort. The Mechanism Housing Should Made Up Of Hpdc Aluminium And Black Powder Coated. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 10.0 +/- 0.3 Cm. The Pedestal Shall Be Made Of Die-Cast Polished Aluminium. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 65.0 +/- 0.5 Cm Pitch-Centre-Dia (75.0 +/- 1.0 Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Polypropylene. The Lumbar Support Assembly Should Consists Of Lumber Spine(Material-Glass Fiber Filled Nylon) Which Is Fixed To Aluminium Back Spine. Overall Dimensions Of Chair Shall Be, Width Of Chair - 70.5Cm, Depth Of Chair - 70.5 Cm As Measured From Pedestal Below. Height From Ground - 99 Cm. Seat Height - 49 Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. , Providingin Place Of Main Table With Overall Size Of Table 2350 X 2350 X 750Mm. The Main Table Shall Be Of Size 2350 X 1150 X 750Mm. The Side Unit Shall Be 1200 X 600 X 750Mm. The Table Is Made Of 25 Mm Thick Mdf – One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. Soft Closing Access Flap Within-Build Power Box Are Provided On Work Surface For Wire Management. The Eru Top Is Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Modesty Panel Is Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Understructure Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. The Pedestal Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board With 0.4 Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. , The Back Unit Shall Be Of Dimensions 2350 X 500 X 1800Mm. It Shall Be Made Of 25Mm Thick Mdf – One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. The Slide Door Unit Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Shutters Are Made Of 25Mm Thick Mdf One Side Pre Laminate Board With 0.4Mm Pvc Membrane Pressed On Top. Shutters Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Storage Is Provided With Lock For Security. , Providing And Placing High Back Chair With Overall Size Of 76.1 Cm W X 76.1 Cm D X 112.7 – 130.2 Cm H X 43.1 – 53.1 Cm Seat Height. The Seat Is Cushioned Seat Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Is Upholstered With Leatherette And Molded High Resilience Polyurethane Foam Of Density 45±2 Kg/M³, & Hardness Load Of 16±2 Kgf As Per Is:7888 For 25% Compression. Seat Size Is 47.0 W Cm X 48.0 D Cm. The Back Is Cushioned Made Of Pu Foam With Insitu Molded M.S. Erw Round Tube Of Size 1.9±0.03Cm X 0.16±0.0128Cm, Upholstered With Leatherette. The Back Size Is 47.7 W Cm X 76.4 D Cm. The Armrest Top Is Molded From Polyurethane And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of Ø3.81±0.03Cm X 0.2±0.01Cm Thick M.S. Erw Tube Having Chrome Plated Finish. The Armrest Is Height Adjustable Up To 6.5±0.5 Cm In 5 Steps. The Adjustable Tilting Mechanism Is Designed With Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair, Seat/Back Tilt Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Is Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Is Of 6.0±0.5Cm. Back Frame Is Connected To The Up/Down Mechanism In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Comfort The Comfortable Back Support To Suit Individual Need. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3Cm. The Pedestal Is High Pressure Die Cast Polished Aluminium & Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Is 65.0±0.5Cm Pitch Centre Dia. (75.0±1.0Cm With Castors). 5 Nos. Of Twin Wheel Castors Are Injection Molded In Plastic Having 6.0±0.1Cm Wheel Diameter And Assembled To Pedestal. , Providing And Placing High Back Chair With Overall Size Of 76.1 Cm W X 76.1 Cm D X 96.5 – 114 Cm H X 43.1 – 53.1 Cm Seat Height. The Seat Is Cushioned Seat Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Is Upholstered With Leatherette And Molded High Resilience Polyurethane Foam Of Density 45±2 Kg/M³, & Hardness Load Of 16±2 Kgf As Per Is:7888 For 25% Compression. Seat Size Is 47.0 W Cm X 48.0 D Cm. The Back Is Cushioned Made Of Pu Foam With Insitu Molded M.S. Erw Round Tube Of Size 1.9±0.03Cm X 0.16±0.0128Cm, Upholstered With Leatherette. The Back Size Is 47.7 W Cm X 76.4 D Cm. The Armrest Top Is Molded From Polyurethane And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of Ø3.81±0.03Cm X 0.2±0.01Cm Thick M.S. Erw Tube Having Chrome Plated Finish. The Armrest Is Height Adjustable Up To 6.5±0.5 Cm In 5 Steps. The Adjustable Tilting Mechanism Is Designed With Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair, Seat/Back Tilt Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Is Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Is Of 6.0±0.5Cm. Back Frame Is Connected To The Up/Down Mechanism In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Comfort The Comfortable Back Support To Suit Individual Need. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3Cm. The Pedestal Is High Pressure Die Cast Polished Aluminium & Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Is 65.0±0.5Cm Pitch Centre Dia. (75.0±1.0Cm With Castors). 5 Nos. Of Twin Wheel Castors Are Injection Molded In Plastic Having 6.0±0.1Cm Wheel Diameter And Assembled To Pedestal. , Supplying And Placing In Place Of 3 Seater Sofa. The Overall Dimensions Of The Sofa Shall Be 2060W X 905D X 855H. The Seat Should Be Made Of Pu Foam With Density 28 ± 2 Kg/Cu.Mtr Having An Additional Top Layer Of Supersoft Pu Foam With Density 32 ± 2 Kg/Cu. Seat Should Be Upholstered With Fabric Or Leatherette. 2) Back Foam: The Back Should Be Made Of Pu Foam With Density 28 ± 2 Kg/Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg/Cu. Mtr, Upholstered With Fabric Or Leatherette. Understructure Should Be Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood (Which Also Shall Be Resistance And Termite Proof As Per Is:303.) And Pinewood Of Cross Section Deviod Of Major Knots And Surface Defects 6 Nos. Per Seat And 3.8Mm Dia. Zigzag Spring Assembly Is Mounted Over Understrucrure For Cushioning Effect. It Should Be A Welded Assembly Made In Stainless Steel (Grade Ss 202) Tube & Plate With Plastic Endcap. , Glass Shall Be 10+/-0.3Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure. It Shall Be A Welded Assembly Made In Ss202 Grade Having Dia. 12+/-0.04 As Per Is:1762. Overall Dimensions Of Table Shall Be Width Of Table= 112.0 Cm, Depth=60.0 Cm, Height=35.1 Cm. , Glass Shall Be 10+/-0.3Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure. It Shall Be A Welded Assembly Made In Ss202 Grade Having Dia. 12+/-0.04 As Per Is:1762. Overall Dimensions Of Table Shall Be Width Of Table= 60.0 Cm, Depth=60.0 Cm, Height=35.1 Cm. , Providing And Placing In Position Meeting Table. Size 3600Mmx 1500Mmx 740Mm. Worktop Shall Be Made From 25Mm Thick Mdf One Side Prelaminate Board With 0.4Mm Pvc Membrane Pressed On To Top And Having Chamfered Edge. Soft Closing Dual Access Flap Provided For Access To Power Supply And Data Cables. The Under-Structure Consists Of Mixture Of 25Mm And 18Mm Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Anodised Aluminium Alloy 63400 - Wp Profile Is Added At Bottom Edges For Improving The Aesthetics.The Product Has A Knock-Down Construction. A Wire Raiser Made Of 0.8Mm Crca Ms Is:513. It Is Epoxy Polyester Powder Coated (Dft 40-60 Microns) For Flow Of Wires And Cables. A Power Box With 2 Cutouts On Either Sides For Standard 8 Module Anchor Roma Is Provided. Beside Each Cutout, An Additional Cutout With Plate Is Provided For Mounting Audio Visual Cables(Eg. Hdmi,Vga-A,Etc). The Product Must Be Ul Greenguard Certified.Complete All As Per The Direction Of Engineer In Charge. , Providing And Placing In Position High Back Chair. The Cushioned Seats Shall Be Made Of Injection Moulded Plastic Outer And Inner. Plastic Inner Shall Be Upholstered With Pure Leather And Moulded High Resiliance Polyurethane Foamof Density = 45±2 Kg/M³, And Hardness Load 16±2 Kgf As Per Is:7888 For 25% Of Compression. Seat Size Shall Be 47.6 Cm W X 49.2 Cm D. The Back Shall Be Cushioned And Shall Be Made Up Of Pu Foam With Insitu Moulded Ms Erw Round Tube Of Size 1.9±0.03 Cm X 0.16±0.0128 Cm, Upholstered With Pure Leather. Back Size Shall Be 47.5 Cm W X 77 Cm D. The Armrest Top Shall Be Moulded From Polurethane, And Shall Be Upholstered With Pure Leather And Mounted On Ot A Drop Lift Adjustable Type Tubular Armrest Support Made Up Of Ø3.81±0.03 Cm X 0.2±0.01 Cm Thick Ms Erw Tube Having Chrome Plated Finish. The Armrest Hieght Shall Be Adjustable Upto 6.5±0.5 Cm In 5 Steps. The Adjustable Tilting Mechanism Shall Be Designed With The Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Contionuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Options Of Variable Tilt Angle To The Chair, Seat/Backtilting Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Shall Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Shall Be 6.0±0.5 Cm. Back Frame Shall Be Connected To The Up/Down Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. The Pneumatic Height Adjustment Shall Have An Adjustment Stroke Of 10±0.3 Cm. The Pedestal Shall Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Shall Be 65.0±0.5 Cm Pitch Centre Dia. 5 Nos. Of Twin Wheel Castors Shall Be Injection Moulded In Plastic Having 6.0±0.1 Cm Wheel Diameter And Assembled To Pedestal. , Providing And Placing In Position Mid Back Chair. The Overall Dimensions Shall Be 76.1Cm X 76.1Cm X 96.5-114Cm. Seat Height Shall Be 44.5Cm - 54.5Cm. The Cushioned Seats Shall Be Made Of Injection Moulded Plastic Outer And Inner. Plastic Inner Shall Be Upholstered With Pure Leather And Moulded High Resiliance Polyurethane Foamof Density = 45±2 Kg/M³, And Hardness Load 16±2 Kgf As Per Is:7888 For 25% Of Compression. Seat Size Shall Be 47.6 Cm W X 49.2 Cm D. The Back Shall Be Cushioned And Shall Be Made Up Of Pu Foam With Insitu Moulded Ms Erw Round Tube Of Size 1.9±0.03 Cm X 0.16±0.0128 Cm, Upholstered With Pure Leather. The Armrest Top Shall Be Moulded From Polurethane, And Shall Be Upholstered With Pure Leather And Mounted On Ot A Drop Lift Adjustable Type Tubular Armrest Support Made Up Of Ø3.81±0.03 Cm X 0.2±0.01 Cm Thick Ms Erw Tube Having Chrome Plated Finish. The Armrest Hieght Shall Be Adjustable Upto 6.5±0.5 Cm In 5 Steps. The Adjustable Tilting Mechanism Shall Be Designed With The Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Contionuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Options Of Variable Tilt Angle To The Chair, Seat/Backtilting Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Shall Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Shall Be 6.0±0.5 Cm. Back Frame Shall Be Connected To The Up/Down Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. The Pneumatic Height Adjustment Shall Have An Adjustment Stroke Of 10±0.3 Cm. The Pedestal Shall Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Shall Be 65.0±0.5 Cm Pitch Centre Dia. 5 Nos. Of Twin Wheel Castors Shall Be Injection Moulded In Plastic Having 6.0±0.1 Cm Wheel Diameter And Assembled To Pedestal. , Supplying And Placing In Place Of 3 Seater Sofa. The Overall Dimensions Of The Sofa Shall Be 2060W X 905D X 855H. The Seat Should Be Made Of Pu Foam With Density 28 ± 2 Kg/Cu.Mtr Having An Additional Top Layer Of Supersoft Pu Foam With Density 32 ± 2 Kg/Cu. Seat Should Be Upholstered With Fabric Or Leatherette. 2) Back Foam: The Back Should Be Made Of Pu Foam With Density 28 ± 2 Kg/Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg/Cu. Mtr, Upholstered With Fabric Or Leatherette. Understructure Should Be Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood (Which Also Shall Be Resistance And Termite Proof As Per Is:303.) And Pinewood Of Cross Section Deviod Of Major Knots And Surface Defects 6 Nos. Per Seat And 3.8Mm Dia. Zigzag Spring Assembly Is Mounted Over Understrucrure For Cushioning Effect. It Should Be A Welded Assembly Made In Stainless Steel (Grade Ss 202) Tube & Plate With Plastic Endcap. , Glass Shall Be 10+/-0.3Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure. It Shall Be A Welded Assembly Made In Ss202 Grade Having Dia. 12+/-0.04 As Per Is:1762. Overall Dimensions Of Table Shall Be Width Of Table= 60.0 Cm, Depth=60.0 Cm, Height=35.1 Cm. , Supplying Of Storage Unit Of Officers Having Dimension 1200Wx 450Dx 1219H:Overall Size Of Hinge Door Unit Is 1200Mmx1219mm (H)X450 Mm (D).Back Panels: 9Mm White Plt Boardside, Bottom : 18Mm Plb With 0.8Mm Pvc Edgeband Top Panel: 18Mm Plb With 0.8Mm Pvc Edgeband For 1219H Unitsshelf & Separator Panels (If Any) : 18Mm Plt Board With 0.8Mm Pvc Edgeband Bottom Shelf Is Fixed & Other Shelves Have 1 Step Adjustment For Optimizing Space.Hdu: 18Mm Plb With With Edgeband, Suitable Hinges Are Provided.Top And Bottom Panels.Handle: Aluminium Handle For Both Hdu & Sduready To Assemble Unit And Is Assembled With Suitable Kd Fittings , Supplying Of Storage Unit Of Officers Having Dimension 900Wx 450Dx 1219H:Overall Size Of Hinge Door Unit Is 900Mmx1219mm (H)X450 Mm (D).Back Panels: 9Mm White Plt Boardside, Bottom : 18Mm Plb With 0.8Mm Pvc Edgeband Top Panel: 18Mm Plb With 0.8Mm Pvc Edgeband For 1219H Unitsshelf & Separator Panels (If Any) : 18Mm Plt Board With 0.8Mm Pvc Edgeband Bottom Shelf Is Fixed & Other Shelves Have 1 Step Adjustment For Optimizing Space.Hdu: 18Mm Plb With With Edgeband, Suitable Hinges Are Provided.Top And Bottom Panels.Handle: Aluminium Handle For Both Hdu & Sduready To Assemble Unit And Is Assembled With Suitable Kd Fittings , Supplying Of Storage Unit Of Officers Having Dimension 750Wx 450Dx 1219H:Overall Size Of Hinge Door Unit Is 750Mmx1219mm (H)X450 Mm (D).Back Panels: 9Mm White Plt Boardside, Bottom : 18Mm Plb With 0.8Mm Pvc Edgeband Top Panel: 18Mm Plb With 0.8Mm Pvc Edgeband For 1219H Unitsshelf & Separator Panels (If Any) : 18Mm Plt Board With 0.8Mm Pvc Edgeband Bottom Shelf Is Fixed & Other Shelves Have 1 Step Adjustment For Optimizing Space.Hdu: 18Mm Plb With With Edgeband, Suitable Hinges Are Provided.Top And Bottom Panels.Handle: Aluminium Handle For Both Hdu & Sduready To Assemble Unit And Is Assembled With Suitable Kd Fittings , Modular Workstation Size 1200X 600 X Ht 1200 With Kbpt,Pedestal And Cpu Torlley.Providing And Placing Panel & Tile Based Modular Workstation, With Thickness As 52.4 Mm Thk And Ht - 1200 Including Powder Coated Aluminium Trims.Tiles: Combination Of Top Tiles Are Fabric Magneitc/Fabric/Fabric Tackable/White Board/Glass Writing Board/ Clear Glass Tile/ Plain Metal/ Prelam Tile. Bottom Tiles - Plain Metal/ Fabric Magnetic/Fabric/Laminated/Prelam.Split Tiles: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Split Fabric Magnetic/Fabric Tackable/White Board/Prelam/ Plain Metal Along With Split Fabric Magnetic/Fabric Tackable/White Board/Prelam/ Plain Metal. Intermediate Blocks Intermediate Blocks Are Given In Fabric/Dl + Fabric/Dl Finsh.Wire Management - Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks.Full Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Clear Glass/Fabric Tackble /Laminate/White Board Finsh.Side Panels Or Legs - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Considered Only On The Open End Conditions Or Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look.Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1200 Mm W X 600 Mm D.Cpu Trolley - With Castors.Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. , Modular Workstation Size 1800X 600 X Ht 1200 With Kbpt,Pedestal And Cpu Torlley.Providing And Placing Panel & Tile Based Modular Workstation, With Thickness As 52.4 Mm Thk And Ht - 1200 Including Powder Coated Aluminium Trims.Tiles: Combination Of Top Tiles Are Fabric Magneitc/Fabric/Fabric Tackable/White Board/Glass Writing Board/ Clear Glass Tile/ Plain Metal/ Prelam Tile. Bottom Tiles - Plain Metal/ Fabric Magnetic/Fabric/Laminated/Prelam.Split Tiles: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Split Fabric Magnetic/Fabric Tackable/White Board/Prelam/ Plain Metal Along With Split Fabric Magnetic/Fabric Tackable/White Board/Prelam/ Plain Metal. Intermediate Blocks Intermediate Blocks Are Given In Fabric/Dl + Fabric/Dl Finsh.Wire Management - Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks.Full Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Clear Glass/Fabric Tackble /Laminate/White Board Finsh.Side Panels Or Legs - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Considered Only On The Open End Conditions Or Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look.Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1800 Mm W X 600 Mm D.Cpu Trolley - With Castors.Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. , Modular Workstation Size 900X 600 X Ht 1200 With Kbpt And Cpu Torlley.Providing And Placing Panel & Tile Based Modular Workstation, With Thickness As 52.4 Mm Thk And Ht - 1200 Including Powder Coated Aluminium Trims.Tiles: Combination Of Top Tiles Are Fabric Magneitc/Fabric/Fabric Tackable/White Board/Glass Writing Board/ Clear Glass Tile/ Plain Metal/ Prelam Tile. Bottom Tiles - Plain Metal/ Fabric Magnetic/Fabric/Laminated/Prelam.Split Tiles: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Split Fabric Magnetic/Fabric Tackable/White Board/Prelam/ Plain Metal Along With Split Fabric Magnetic/Fabric Tackable/White Board/Prelam/ Plain Metal. Intermediate Blocks Intermediate Blocks Are Given In Fabric/Dl + Fabric/Dl Finsh.Wire Management - Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks.Full Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Clear Glass/Fabric Tackble /Laminate/White Board Finsh.Side Panels Or Legs - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Considered Only On The Open End Conditions Or Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look.Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 900 Mm W X 600 Mm D.Cpu Trolley - With Castors , The Cushioned Seat Assembly Shall Consists Of Seat Outer(Material-30% Glass Fiber Nylon) And Upholstered Seat Inner(Material-Polypropylene) With Moulded Polyurethane Foam And Polyster Fabric. The Net Back Should Made Up Of Back Outer(Material-Glass Fiber Filled Nylon) And Back Inner(Material-Pp) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Size Of Back Shall Be (W)-46.5Cm, (H)-60.0Cm & Size Of Seat Shall Be (W)-51.0Cm X (D)-49.0Cm. The Supprot Spine Should Made Up Of High Pressure Die Cast Polished Aluminium. Armrest Is Having Two Adjustment, Height(6+/-0.5Cm) And Depth(6+/-0.5Cm). Height Adjustment Shall Be Provided In Aluminium Structure Of Armrest Which Is Connected To Aluminium Back Spine And Is Operated With Button. Armtop Is Made Up Of Pu Molded Over Plastic Inner. The Mechanim Shall Be Active Bio Synchro Mechanism. The Mechanism Of Chair Shall Have Following Features:360 Degree Revolving Type, Seat/Back Tilt Ratio Of 1:2, Active Bio-Synchro Mechanism, 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Front-Pivot For Tilt With Feet Resting On Ground And Continious Lumber Support Should Ensure More Comfort. The Mechanism Housing Should Made Up Of Hpdc Aluminium And Black Powder Coated. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 10.0 +/- 0.3 Cm. The Pedestal Shall Be Made Of Die-Cast Polished Aluminium. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 65.0 +/- 0.5 Cm Pitch-Centre-Dia (75.0 +/- 1.0 Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Polypropylene. The Lumbar Support Assembly Should Consists Of Lumber Spine(Material-Glass Fiber Filled Nylon) Which Is Fixed To Aluminium Back Spine. Overall Dimensions Of Chair Shall Be, Width Of Chair - 70.5Cm, Depth Of Chair - 70.5 Cm As Measured From Pedestal Below. Height From Ground - 99 Cm. Seat Height - 49 Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. , Providing And Placing Panel & Tile Based Modular Workstation Of Table Size 1500Mm(L)X750mm(D), With Partition Thickness As 52.4 Mm Thk And Ht - 1200 Including Powder Coated Aluminium Trims.Tiles On Main Spine: Combination Of Top Tiles Are Fabric / Prelam Intermediate Blocks Are Given In Dl + Dl Finsh, Bottom Tile Are Given Of Metal.Wire Management - Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks.Modesty Panels With Assembly Leg - 25 Mm Thk Plb Modesty Has Been Given On The Front Of The Main Worktop Which Is Attached To The Partition On One End With Leg At End Bkts And On The Other End With Metal Powder Coated Frontier Leg. Legs - Metal Powder Coated Legs At The End. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look.Worksurface - Main Table Recta Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500(W).Pedestals With Legs - Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castorskbpt Mousetray - Metal. , Made Of 25Mm Thick Pre-Laminated Board (Plb) Of E1-P2 Grade And Approved Shadeconfirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Access Flap Provided On Work Surface For Wire Management Main Worktop Modesty Panel Legs Made Of 18Mm Thick Pre-Laminated Twin Board (Plt) Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Cross Memberspower Box Access Flap Made Of 25Mm Thick Pre-Laminated Board (Plb) Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Return Worktop Return Cross Members Return Cross Member In Unitized T-2 Desk Series Is Made From 50Mm X 25Mm X 1.2Mm Thick Erw Tube (As Per Is:7138) Return Cross Member Is Assembled By Friction Fit Pdc Joinery And Grub Screws At One End And 3Mm Thick Hr Plate Welded At Other End. There Is One Return Cross Member For One Table.Cube Legs Are Fabricated From Ms Erw Tube Of 50 Mm X 25 Mm X 1.2Mm Thick And 40 Mm X 40 Mm X 1.2 Mm Thick (As Per Is: 7138). At The Top Surface Of Leg, Support Brackets Of 3 Mm Thick Hr (As Per Is: 2062) Are Welded For Fixing Worktop. These Are Welded Togesther By Argo Shield Welding. This Welded Structure Is Coated With 50 Micron Epoxy Polyester Coating. At The Base, A Plastic Cap With M8 Molded Insert Is Fixed, On To Which A Straight M8 Leveler Fitted Which Allows For Adjustment Of The Height Upto 50Mm. Dos221265 Cross Members In Unitized T-2 Desk Series Are Made From 50Mm X 25Mm X 1.2Mm Thickerw Tube (As Per Is:7138). These Are Coated With 50 Micron Epoxy Polyester Coating. Cross Members Are Assembled By Friction Fit Pdc Joinery And Grub Screws. There Are Always Two Cross Members For One Table.N Soft Closing Access Flap Is Used In Unitized T-2 Desk Series. Provision For Standard Size Of 8 Module Electrical (Anchor Roma) Is Offered. Access Flap Is Made From Aluminum Extrusion, Pdc Parts Made From Aluminum Alloy And Plastic Parts Are Made From Nylon 6 And Wire Brush With Nylon Bristles. , The Cushioned Seat Assembly Shall Consists Of Seat Outer(Material-30% Glass Fiber Nylon) And Upholstered Seat Inner(Material-Polypropylene) With Moulded Polyurethane Foam And Polyster Fabric. The Net Back Should Made Up Of Back Outer(Material-Glass Fiber Filled Nylon) And Back Inner(Material-Pp) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Size Of Back Shall Be (W)-46.5Cm, (H)-60.0Cm & Size Of Seat Shall Be (W)-51.0Cm X (D)-49.0Cm. The Supprot Spine Should Made Up Of High Pressure Die Cast Polished Aluminium. Armrest Is Having Two Adjustment, Height(6+/-0.5Cm) And Depth(6+/-0.5Cm). Height Adjustment Shall Be Provided In Aluminium Structure Of Armrest Which Is Connected To Aluminium Back Spine And Is Operated With Button. Armtop Is Made Up Of Pu Molded Over Plastic Inner. The Mechanism Shall Be Active Biosynchro Mechanism. The Mechanism Of Chair Shall Have Following Features:360 Degree Revolving Type, Seat/Back Tilt Ratio Of 1:2, Active Bio-Synchro Mechanism, 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Front-Pivot For Tilt With Feet Resting On Ground And Continious Lumber Support Should Ensure More Comfort. The Mechanism Housing Should Made Up Of Hpdc Aluminium And Black Powder Coated. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 10.0 +/- 0.3 Cm. The Pedestal Shall Be Made Of Die-Cast Polished Aluminium. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 65.0 +/- 0.5 Cm Pitch-Centre-Dia (75.0 +/- 1.0 Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Polypropylene. The Lumbar Support Assembly Should Consists Of Lumber Spine(Material-Glass Fiber Filled Nylon) Which Is Fixed To Aluminium Back Spine. The Neckrest Assembly Consists Of Upholstered Neckrest Inner(Material-Poly Propylene) With Moulded Polyurethane Foam And Polyster Fabric. Upholstered Inner Shall Be Fixed To Neck Rest Cover. Neckrest Shall Be Fixed To Back Assembly Through Neckrest Spline. Overall Dimensions Of Chair Shall Be, Width Of Chair - 75.0Cm, Depth Of Chair - 75.0 Cm As Measured From Pedestal Below. Height From Ground - Min 109.3 To Max 124.4 Cm. Seat Height - Min 45.5Cm To Max 55.5Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. , The Cushioned Seat Assembly Shall Consists Of Seat Outer(Material-30% Glass Fiber Nylon) And Upholstered Seat Inner(Material-Polypropylene) With Moulded Polyurethane Foam And Polyster Fabric. The Net Back Should Made Up Of Back Outer(Material-Glass Fiber Filled Nylon) And Back Inner(Material-Pp) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Size Of Back Shall Be (W)-46.5Cm, (H)-60.0Cm & Size Of Seat Shall Be (W)-51.0Cm X (D)-49.0Cm. The Supprot Spine Should Made Up Of High Pressure Die Cast Polished Aluminium. Armrest Is Having Two Adjustment, Height(6+/-0.5Cm) And Depth(6+/-0.5Cm). Height Adjustment Shall Be Provided In Aluminium Structure Of Armrest Which Is Connected To Aluminium Back Spine And Is Operated With Button. Armtop Is Made Up Of Pu Molded Over Plastic Inner. The Mechanim Shall Be Active Bio Synchro Mechanism. The Mechanism Of Chair Shall Have Following Features:360 Degree Revolving Type, Seat/Back Tilt Ratio Of 1:2, Active Bio-Synchro Mechanism, 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Front-Pivot For Tilt With Feet Resting On Ground And Continious Lumber Support Should Ensure More Comfort. The Mechanism Housing Should Made Up Of Hpdc Aluminium And Black Powder Coated. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 10.0 +/- 0.3 Cm. The Pedestal Shall Be Made Of Die-Cast Polished Aluminium. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 65.0 +/- 0.5 Cm Pitch-Centre-Dia (75.0 +/- 1.0 Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Polypropylene. The Lumbar Support Assembly Should Consists Of Lumber Spine(Material-Glass Fiber Filled Nylon) Which Is Fixed To Aluminium Back Spine. Overall Dimensions Of Chair Shall Be, Width Of Chair - 70.5Cm, Depth Of Chair - 70.5 Cm As Measured From Pedestal Below. Height From Ground - 99 Cm. Seat Height - 49 Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. , Worktop Is Made Of Medium Density Fibreboard, Is:12406 (Mdf) 25Mm Thk Pu Tops (E1 Grade). On Top Side Pu Painting Of Minimum 2H Pencil Hardness With High Gloss And Matte On Bottom Side As Per Color Chart. The Work Tops Are Available In 3 Shapes, Viz.: Circle (Dia 800), Rectangle (2400X900) .The Rod Type Understructure Is Made Of Dia 16Mm & 8Mm Ms Rod (As Per Is:432) & 3Mm Thk Hrsteel Plates (As Per Is:2062) Welded Together Using Argo Shield Welding. The Whole Structure Isepoxy Polyster Powder Coated (Dft 40-60 Microns). It Is Assembled Using Ss Hardware & Shoeat Bottom. , Worktop Is Made Of Medium Density Fibreboard, Is:12406 (Mdf) 25Mm Thk Pu Tops (E1 Grade). On Top Side Pu Painting Of Minimum 2H Pencil Hardness With High Gloss And Matte On Bottom Side As Per Color Chart. The Work Tops Are Available In 3 Shapes, Viz.: Circle (Dia 800), Rectangle Square (800X800).The Rod Type Understructure Is Made Of Dia 16Mm & 8Mm Ms Rod (As Per Is:432) & 3Mm Thk Hrsteel Plates (As Per Is:2062) Welded Together Using Argo Shield Welding. The Whole Structure Isepoxy Polyster Powder Coated (Dft 40-60 Microns). It Is Assembled Using Ss Hardware & Shoeat Bottom. , The Seat And Back Are Made Up Of Injection Moulded High Impact Strength Polypropylene Polymer Compound With Indoor Grade Uv Resistance. Seat Size Shall Be 52.5Cm X 53.2Cm. Back Size Shall Be 51.6Cm X 40.5Cm. The Tubular Welded Frame Is Made Of Dia. 2.22Cm X 0.12Cm And 3.5Cm X 1.5Cm X 0.12Cm Stainless Steel 202 Grade Tube. The Rubes Are Buff Polished To Give Shiny Finish. The Shoes And Amrest Are Made Of High Impacy Strength Polypropylene Polyemr Compound With Indoor Grade Uv Resistance And Pressed And Press Fitted With Tubular Frame. The Overall Dimensions Of The Chair Shall Be 52.4Cm X 55.8Cm X 84.5Cm. The Seating Height Shall Be 45.0Cm. , Providing And Placing Main Table Of Size 3000X2550x740.Main Worktop Size 3000X1050x740, Eru 1500X600x610mm- Main Worktop - Made Of 43Mm Thick (±1) Combination Of Mdf And Particle Board With Top Veneer Face Coated With Clear Lacquer. All Edges Are Edge Banded With Matching 1Mm Thick Veneer Lipping.Leather Pad:Made Of 18Mm Thick (±1) Mdf With Leatherette Wrapped Around Top Surface. This Leather Pad Is Fixed To Main Top Panel.Drawer Unit:Top Panel And Drawer Unit Modesty Panel Is Made Of 43Mm Thick (±1) Combination Ofmdf And Particle Board With Top Veneer Face Coated With Clear Lacquer. All Thickness Edges Are Edge Banded With Matching Lipping.Remaining Construction Is Of 18Mm Pre-Laminated Twin Board (Plt) Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Bottom Panel Of Drawer Is 9Mm Thick Particle Board With Leatherette On Top Surface.Drawer Unit Is Provided With Soft Closing Channels For Smooth Opening And Closing.Drawer Unit Is Secured With Side Central Lock.Open Storage Unit:Top Panel And Open Storage Unit Modesty Panel Is Made Of 43Mm Thick (±1) Combination Of Mdf And Particle Board With Top Veneer Face Coated With Clear Lacquer. All Thickness Edges Are Edge Banded With Matching Lipping.Remaining Construction Is Of 18Mm Pre-Laminated Twin Board (Plt) Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Modesty:Made Of 18Mm Thick Pre-Laminated Twin Board (Plt) Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Modesty Is Fitted With Aluminum Trims.Understructure:Made Of 18Mm Thick Pre-Laminated Twin Board (Plt) Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Door Is Fixed With Soft Closing Hinges And Handle Is Provided For Ease Of Opening.Also Lock Is Provided On Side Panel For Security.Access Flap With Power Box:Soft Closing Access Flap With Power Box Contains 3 Universal Sockets, 2 Usb Power Points, 1 Hdmi Connection, 1 Inbuilt Misc. Cable Grommet And Cat 3 And Cat 6Connections. , Providing And Placing Back Unit Of Size 2400Mm(L)X470mm(D)X2325mm(H).Construction And Material: Made From Combination Of Top Panel(0.5Mm Crca), Side Panel(0.5Mm Crca), Bottom Panel(0.5Mm Crca For 600W And 0.8Mm Crca For 1200W), Back Panel(0.5Mm Crca), Top Bottom Stiffener(1.2Mm Crca) And End Cover(0.5Mm Crca). Shelves Are 12 Bend Panel Made Of 0.7Mm Thick Crca (D Grade, Is-513). 4 Nos Of Shelves For 1950H And 5 Nos Of Shelves For 2325H Back Unit. Storage Body Is Powder Coated With Epoxy Polyester To The Thickness Of 50 Microns (+/-10 Micron).Veneer Door:Made Of 12Mm Thick (±1) Mdf With 3.5Mm Veneer Both Side And Face Coated With Clearlacquer. All Edges Are Edge Banded With Matching 1Mm Thick Veneer Lipping. Door Isprovided With Soft Closing Hinge. Handle Is Also Provided For Ease Of Opening. Storage Issecured With 3 Way Cam Lock.Glass Door:Made From The Combination Of Aluminium Alloy (63400) Extrusion And 4Mm Cleartoughened Glass. Aluminium Extrusion Of Glass Doors Are Powder Coated With Epoxypolyester To The Thickness Of 50 Microns (+/-10 Micron). Handle Is Provided For Ease Ofopening. Rh Glass Door Is Provided With 3 Way Cam Lock For Security. , Seat Assembly: The Cushioned Seat Inner Is Made Of Injection Moulded Glass Filled Poly-Amide.-Posture Perfect High Back Chair: Nappa Leather Upholstered Seat Sub-Assembly Consists Of Moulded High Resilience (Hr) Polyurethane Foam Of Density 45+2 Kg/M°, And Hardness Load 16 ÷ 2 Kgf As Per Is 7888 For 25% Compression. Seat Size: 45.5Cm. (D) X 52.4Cm. (W).Back Assembly: The Cushioned Back Is Made Of Pu Foam With Polypropylene Injection Molded.Plastic Inner.High Back Size: 50.5 Cm. (W) X 76.7 Cm. (D) Armrests: The Armrest Having Four Range Of Adjustment.Height Adjustment Sub Assembly Is Inserted In The Aluminum Die Cast Arm Body & All Other Adjustment Are Provided In Adjustable Arm Top Sub Assembly.Up-Down Adjustment Has 8 Position (10.5+0.5Cm Range).Arm Top Swivel Adjustment- 2 Position, 12°+2° Swivel Inside.Arm Top Width Adjustment - Any Position (2.0÷0.5Cm Range Each Arm Top) Arm Top To - Fro Adjustment- Any Position (4.0$0.5Cm Range).Armrest Top Is Made Up Of High Density Pu Molded Over Glass Filled Poly-Amide Inner.Posture Perfect Mechanism: The Adjustable Tilting Mechanism Is Designed With The Following Features:360° Revolving Type. Forward Tilt Of Sesat And Back. Upright Tilt Lock.Tilt Tension Adjustment Can Be Operated In Seating Position.3-Position Tilt Limiter. Seat Depth Adjustment: Seat Depth Adjustment Is Housed Below The Seat And Integrated With The Mechanism With Help Of Polypropene Seat Cover. Seat Depth Can Be Adjusted In Sitting Position. Seat Depth Adjustment Range Is Of 5.0$0.5 Cm.Adjustable Back Support: Back Assembly Is Connected To Buff Polish Die Cast Aluminum Spine With An Up-Down Mechanism Assembly. Back Height Can Be Adjusted In Sitting Position. It Can Be Adjusted In The Range Of 7.5+0.5 Cm.Pneumatic Height Adjustment: The Heavy Duty Class 4 Pneumatic Height Adjustment Has An Adjustment Stroke Of 13.0$0.3 Cm. Pedestal: The Pedestal Is Made Of Die-Cast Aluminium With Buffing Finish. It Is Fitted With 5Nos. Twin Wheel Castor. The Pedestal Is 67.0 ÷ 0.5Cm Pitch-Center Dia. Twin Wheel Castor: 5 Nos. Twin Wheel Soft Castors Are Injection Moulded In Poly-Amide With Pu Lining, Having 6.50.1Cm Wheel Diameter And Assembled To Pedestal. , Seat Assembly: The Cushioned Seat Inner Is Made Of Injection Moulded Glass Filled Poly-Amide.-Posture Perfect Full Back Chair: Nappa Leather Upholstered Seat Sub-Assembly Consists Of Moulded High Resilience (Hr) Polyurethane Foam Of Density 45+2 Kg/M°, And Hardness Load 16 ÷ 2 Kgf As Per Is 7888 For 25% Compression. Seat Size: 45.5Cm. (D) X 52.4Cm. (W).Back Assembly: The Cushioned Back Is Made Of Pu Foam With Polypropylene Injection Molded.Plastic Inner.High Back Size: 50.5 Cm. (W) X 61.8 Cm. (D) Armrests: The Armrest Having Four Range Of Adjustment.Height Adjustment Sub Assembly Is Inserted In The Aluminum Die Cast Arm Body & All Other Adjustment Are Provided In Adjustable Arm Top Sub Assembly.Up-Down Adjustment Has 8 Position (10.5+0.5Cm Range).Arm Top Swivel Adjustment- 2 Position, 12°+2° Swivel Inside.Arm Top Width Adjustment - Any Position (2.0÷0.5Cm Range Each Arm Top) Arm Top To - Fro Adjustment- Any Position (4.0$0.5Cm Range).Armrest Top Is Made Up Of High Density Pu Molded Over Glass Filled Poly-Amide Inner.Posture Perfect Mechanism: The Adjustable Tilting Mechanism Is Designed With The Following Features:360° Revolving Type. Forward Tilt Of Sesat And Back. Upright Tilt Lock.Tilt Tension Adjustment Can Be Operated In Seating Position.3-Position Tilt Limiter. Seat Depth Adjustment: Seat Depth Adjustment Is Housed Below The Seat And Integrated With The Mechanism With Help Of Polypropene Seat Cover. Seat Depth Can Be Adjusted In Sitting Position. Seat Depth Adjustment Range Is Of 5.0$0.5 Cm.Adjustable Back Support: Back Assembly Is Connected To Buff Polish Die Cast Aluminum Spine With An Up-Down Mechanism Assembly. Back Height Can Be Adjusted In Sitting Position. It Can Be Adjusted In The Range Of 7.5+0.5 Cm.Pneumatic Height Adjustment: The Heavy Duty Class 4 Pneumatic Height Adjustment Has An Adjustment Stroke Of 13.0$0.3 Cm. Pedestal: The Pedestal Is Made Of Die-Cast Aluminium With Buffing Finish. It Is Fitted With 5Nos. Twin Wheel Castor. The Pedestal Is 67.0 ÷ 0.5Cm Pitch-Center Dia. Twin Wheel Castor: 5 Nos. Twin Wheel Soft Castors Are Injection Moulded In Poly-Amide With Pu Lining, Having 6.50.1Cm Wheel Diameter And Assembled To Pedestal. , Providing And Placing Sofa Of Size 1520Mm (W)X 840Mm (D)X760(H) . Pure Leather Upholstery - Pigmented Durable And Ergonomically Perfect For Seating. The Top Grains Of Leather Is Clearly Visible Which Adds To The Aestheticss Spring Webbing- Provides Bouncing Back Action For Floating Feeling.Construction- Made Of Solid Wood Frame With Ply Cross Section Which Is Moisture , Termite And Borer Resistant. Adequate Treatment Of Wood Initiated To Enhance Longevity And Maintain Robustness.Ply - 12 Mm, Ply - 6Mm Flexiply , Paper Board 3Mm , Webbing 2 Inch , Zigzag Spring - 3.8Mmcomfort- The Seat Is Made Of Soft Foam Of Density 28 Kg/M3 Which Enhances Comfort And Cushioning With Sinking Feeling.Ground Elevation- Equipped With Legs, The Sofa Is Elevated To Allow A Level Of Ground Clearance. , Providing And Placing In Position Centre Table Having A Size Of : 1000Mm(L) X 600Mm(D) X 425Mm(H). Understructure Of The Table Which Includes Legs, Top Wooden Frame & Bottom Tie Members Are Made Out Of First Quality Rubberwood Of Approved Make Without Knots &Defects On All Faces. Bottom Tray Is Made Of 1.2Mm Thick Ms Sheet. Metal Brackets Are Used For Assembly Purpose. Top: 8Mm Thick Toughened Glass Of Approved Make. Construction: Knock-Down Assembly.Wooden Members Are Pu Painted With Hardness-2H. Metal Components Are Powder Coated. Bottom Ms Metal Tray Is Having Floral Pattern Laser-Cut. Top Glass Is Having Sand Blasted Floral Pattern On Bottom Surface 5. Hardware: Knock-Down Assembly With High Quality Standard Hardware Like Screws, Metal Inserts, Wooden Dowel, Plastic Leg Bush. Complete All As Per The Dimension Of Engineer-In-Charge.Complete All As Per The Direction Of Engineer In Charge. , Providing And Placing In Position Corner Table Having A Size Of : 500Mm(L) X 500Mm(D) X 425Mm(H). Understructure Of The Table Which Includes Legs, Top Wooden Frame & Bottom Tie Members Are Made Out Of First Quality Rubberwood Of Approved Make Without Knots &Defects On All Faces. Bottom Tray Is Made Of 1.2Mm Thick Ms Sheet. Metal Brackets Are Used For Assembly Purpose. Top: 8Mm Thick Toughened Glass Of Approved Make. Construction: Knock-Down Assembly.Wooden Members Are Pu Painted With Hardness-2H. Metal Components Are Powder Coated. Bottom Ms Metal Tray Is Having Floral Pattern Laser-Cut. Top Glass Is Having Sand Blasted Floral Pattern On Bottom Surface 5. Hardware: Knock-Down Assembly With High Quality Standard Hardware Like Screws, Metal Inserts, Wooden Dowel, Plastic Leg Bush. Complete All As Per The Dimension Of Engineer-In-Charge. Complete All As Per The Direction Of Engineer In Charge. , Providing And Placing In Position Discussion Table.The Overall Size Of The Wortop Shall Be 1000Mm Dia. X 740Mm. Worktop Shall Be Made From 25Mm Thick Mdf One Side Prelaminate Board With 0.4Mm Pvc Membrane Pressed On To Top And Having Chamfered Edge. Soft Closing Dual Access Flap Provided For Access To Power Supply And Data Cables. Made Of 25Mm Thick Mdf-One Side Pre-Laminate Board With 0.4Mm Pvc Membrane Pressed On To Top. Gromet Provided For Wire Management. The Under-Structure Consists Of An Inner Tube Assembly With Top For Worktop Mounting And Base Plate With Levellers. The Top Plate Is Made Of 5Mm Thk Hot Rolled Steel Plates (Hr) (As Per Is: 2062) & The Bottom Plate Is Made Of 8Mm Thk Hot Rolled Steel Plates (Hr) (As Per Is:2062). The Inner Tube Assembly Is Made Of 25.4Mmx 25.4Mm X 1.2Mm Thk Round Electric Resistant Welded Tube (Erw)(As Per Is:7138) Welded Together Using Tungsten Inert Gas Welding. The Whole Structure Is Epoxy Polyester Powder Coated (Dft 40-60 Microns). The Product Has A Knock-Down Construction. , Providing And Placing High Back Chair With Overall Size Of 76.1 Cm W X 76.1 Cm D X 96.5 – 114 Cm H X 43.1 – 53.1 Cm Seat Height. The Seat Is Cushioned Seat Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Is Upholstered With Leatherette And Molded High Resilience Polyurethane Foam Of Density 45±2 Kg/M³, & Hardness Load Of 16±2 Kgf As Per Is:7888 For 25% Compression. Seat Size Is 47.0 W Cm X 48.0 D Cm. The Back Is Cushioned Made Of Pu Foam With Insitu Molded M.S. Erw Round Tube Of Size 1.9±0.03Cm X 0.16±0.0128Cm, Upholstered With Leatherette. The Back Size Is 47.7 W Cm X 76.4 D Cm. The Armrest Top Is Molded From Polyurethane And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of Ø3.81±0.03Cm X 0.2±0.01Cm Thick M.S. Erw Tube Having Chrome Plated Finish. The Armrest Is Height Adjustable Up To 6.5±0.5 Cm In 5 Steps. The Adjustable Tilting Mechanism Is Designed With Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair, Seat/Back Tilt Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Is Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Is Of 6.0±0.5Cm. Back Frame Is Connected To The Up/Down Mechanism In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Comfort The Comfortable Back Support To Suit Individual Need. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3Cm. The Pedestal Is High Pressure Die Cast Polished Aluminium & Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Is 65.0±0.5Cm Pitch Centre Dia. (75.0±1.0Cm With Castors). 5 Nos. Of Twin Wheel Castors Are Injection Molded In Plastic Having 6.0±0.1Cm Wheel Diameter And Assembled To Pedestal. , Providingin Place Of Main Table With Overall Size Of Table 1800 X 2100 X 750Mm. The Main Table Shall Be Of Size 1800 X 900 X 750Mm. The Side Unit Shall Be 1200 X 500 X 750Mm. The Table Is Made Of 25 Mm Thick Mdf – One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. Soft Closing Access Flap Within-Build Power Box Are Provided On Work Surface For Wire Management. The Eru Top Is Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Modesty Panel Is Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Understructure Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. The Pedestal Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board With 0.4 Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. , The Back Unit Shall Be Of Dimensions 1800 X 500 X 1800Mm. It Shall Be Made Of 25Mm Thick Mdf – One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. The Slide Door Unit Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Shutters Are Made Of 25Mm Thick Mdf One Side Pre Laminate Board With 0.4Mm Pvc Membrane Pressed On Top. Shutters Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Storage Is Provided With Lock For Security. , Providingin Place Of Main Table With Overall Size Of Table 1650 X 1650 X 750Mm. The Main Table Shall Be Of Size 1650 X 750 X 750Mm. The Side Unit Shall Be 900 X 500 X 750Mm. The Table Is Made Of 25 Mm Thick Mdf – One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. Soft Closing Access Flap Within-Build Power Box Are Provided On Work Surface For Wire Management. The Eru Top Is Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Modesty Panel Is Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Understructure Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. The Pedestal Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board With 0.4 Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. , Providing And Placing High Back Chair With Overall Size Of 76.1 Cm W X 76.1 Cm D X 112.7 – 130.2 Cm H X 43.1 – 53.1 Cm Seat Height. The Seat Is Cushioned Seat Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Is Upholstered With Leatherette And Molded High Resilience Polyurethane Foam Of Density 45±2 Kg/M³, & Hardness Load Of 16±2 Kgf As Per Is:7888 For 25% Compression. Seat Size Is 47.0 W Cm X 48.0 D Cm. The Back Is Cushioned Made Of Pu Foam With Insitu Molded M.S. Erw Round Tube Of Size 1.9±0.03Cm X 0.16±0.0128Cm, Upholstered With Leatherette. The Back Size Is 47.7 W Cm X 76.4 D Cm. The Armrest Top Is Molded From Polyurethane And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of Ø3.81±0.03Cm X 0.2±0.01Cm Thick M.S. Erw Tube Having Chrome Plated Finish. The Armrest Is Height Adjustable Up To 6.5±0.5 Cm In 5 Steps. The Adjustable Tilting Mechanism Is Designed With Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair, Seat/Back Tilt Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Is Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Is Of 6.0±0.5Cm. Back Frame Is Connected To The Up/Down Mechanism In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Comfort The Comfortable Back Support To Suit Individual Need. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3Cm. The Pedestal Is High Pressure Die Cast Polished Aluminium & Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Is 65.0±0.5Cm Pitch Centre Dia. (75.0±1.0Cm With Castors). 5 Nos. Of Twin Wheel Castors Are Injection Molded In Plastic Having 6.0±0.1Cm Wheel Diameter And Assembled To Pedestal. , Providing And Placing High Back Chair With Overall Size Of 76.1 Cm W X 76.1 Cm D X 96.5 – 114 Cm H X 43.1 – 53.1 Cm Seat Height. The Seat Is Cushioned Seat Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Is Upholstered With Leatherette And Molded High Resilience Polyurethane Foam Of Density 45±2 Kg/M³, & Hardness Load Of 16±2 Kgf As Per Is:7888 For 25% Compression. Seat Size Is 47.0 W Cm X 48.0 D Cm. The Back Is Cushioned Made Of Pu Foam With Insitu Molded M.S. Erw Round Tube Of Size 1.9±0.03Cm X 0.16±0.0128Cm, Upholstered With Leatherette. The Back Size Is 47.7 W Cm X 76.4 D Cm. The Armrest Top Is Molded From Polyurethane And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of Ø3.81±0.03Cm X 0.2±0.01Cm Thick M.S. Erw Tube Having Chrome Plated Finish. The Armrest Is Height Adjustable Up To 6.5±0.5 Cm In 5 Steps. The Adjustable Tilting Mechanism Is Designed With Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair, Seat/Back Tilt Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Is Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Is Of 6.0±0.5Cm. Back Frame Is Connected To The Up/Down Mechanism In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Comfort The Comfortable Back Support To Suit Individual Need. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3Cm. The Pedestal Is High Pressure Die Cast Polished Aluminium & Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Is 65.0±0.5Cm Pitch Centre Dia. (75.0±1.0Cm With Castors). 5 Nos. Of Twin Wheel Castors Are Injection Molded In Plastic Having 6.0±0.1Cm Wheel Diameter And Assembled To Pedestal. , Supplying And Placing A Reception Table Of Size 2400 X 1770 X 1080 Mm, Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Access Flap Provided On Work Surface For Wire Management. Power Box Made With 0.8 Mm Thick Crca (Is: 513), With Switch Plate (8+3 Module Cutout Provision For Anchor Roma). This Is Fixed With Worktop Along The Width At Access Flap Position Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Made Of 18Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Made Of 18Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping Made Of 18Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.**Drawer Bottom Is Made Of 5.5Thk Mdf Whiteboard Handle Is Provided For Ease Of Opening. Hdu And Drawer Is Provided With Cam Lock For Security Wire Riser Made Of 0.8Mm Crca (Is-513) Is Provided For Proper Wire Management. Organizer Plate Made Of 1.2Mm Crca (Is-513) Is Provided For Magnetic Sticky Notes. Bag Hanger Hook Made Of 1.2Mm Crca (Is-513) Is Provided For Bag Hanging. Company Should Be Iso-9001, 14001, 45001,50001, Greenguard, Bifma And Aiota Certified. Product Should Be Greenguard (Ul) Certified. Company And Product Certificate Must Be Certified From Valid Authorised Laboratories , The Cushioned Seat Assembly Shall Consists Of Seat Outer(Material-30% Glass Fiber Nylon) And Upholstered Seat Inner(Material-Polypropylene) With Moulded Polyurethane Foam And Polyster Fabric. The Net Back Should Made Up Of Back Outer(Material-Glass Fiber Filled Nylon) And Back Inner(Material-Pp) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Size Of Back Shall Be (W)-46.5Cm, (H)-60.0Cm & Size Of Seat Shall Be (W)-51.0Cm X (D)-49.0Cm. The Supprot Spine Should Made Up Of High Pressure Die Cast Polished Aluminium. Armrest Is Having Two Adjustment, Height(6+/-0.5Cm) And Depth(6+/-0.5Cm). Height Adjustment Shall Be Provided In Aluminium Structure Of Armrest Which Is Connected To Aluminium Back Spine And Is Operated With Button. Armtop Is Made Up Of Pu Molded Over Plastic Inner. The Mechanim Shall Be Active Bio Synchro Mechanism. The Mechanism Of Chair Shall Have Following Features:360 Degree Revolving Type, Seat/Back Tilt Ratio Of 1:2, Active Bio-Synchro Mechanism, 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Front-Pivot For Tilt With Feet Resting On Ground And Continious Lumber Support Should Ensure More Comfort. The Mechanism Housing Should Made Up Of Hpdc Aluminium And Black Powder Coated. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 10.0 +/- 0.3 Cm. The Pedestal Shall Be Made Of Die-Cast Polished Aluminium. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 65.0 +/- 0.5 Cm Pitch-Centre-Dia (75.0 +/- 1.0 Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Polypropylene. The Lumbar Support Assembly Should Consists Of Lumber Spine(Material-Glass Fiber Filled Nylon) Which Is Fixed To Aluminium Back Spine. Overall Dimensions Of Chair Shall Be, Width Of Chair - 70.5Cm, Depth Of Chair - 70.5 Cm As Measured From Pedestal Below. Height From Ground - 99 Cm. Seat Height - 49 Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. , Overall Size :Width : 182Cm Depth : 92Cm Height : 89Cm Seating Height : 47.5Cm Thread : Nylon . Material Handling Data Sheet (Msds) For Gluestandard Of Plywood Used: Is 303 Commercial Plywood , Thickness 12Mm,Pure Leather Sofa. , Overall Size :Width : 92Cm Depth : 92Cm Height : 89Cm Seating Height : 47.5Cm Thread : Nylon . Material Handling Data Sheet (Msds) For Gluestandard Of Plywood Used: Is 303 Commercial Plywood , Thickness 12Mm,Pure Leather Sofa. , Glass Shall Be 10+/-0.3Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure. It Shall Be A Welded Assembly Made In Ss202 Grade Having Dia. 12+/-0.04 As Per Is:1762. Overall Dimensions Of Table Shall Be Width Of Table= 112.0 Cm, Depth=60.0 Cm, Height=35.1 Cm. , Glass Shall Be 10+/-0.3Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure. It Shall Be A Welded Assembly Made In Ss202 Grade Having Dia. 12+/-0.04 As Per Is:1762. Overall Dimensions Of Table Shall Be Width Of Table= 60.0 Cm, Depth=60.0 Cm, Height=35.1 Cm. , Supplying Of Storage Unit Of Officers Having Dimension 1200Wx 450Dx 1219H:Overall Size Of Hinge Door Unit Is 1200Mmx1219mm (H)X450 Mm (D).Back Panels: 9Mm White Plt Boardside, Bottom : 18Mm Plb With 0.8Mm Pvc Edgeband Top Panel: 18Mm Plb With 0.8Mm Pvc Edgeband For 1219H Unitsshelf & Separator Panels (If Any) : 18Mm Plt Board With 0.8Mm Pvc Edgeband Bottom Shelf Is Fixed & Other Shelves Have 1 Step Adjustment For Optimizing Space.Hdu: 18Mm Plb With With Edgeband, Suitable Hinges Are Provided.Top And Bottom Panels.Handle: Aluminium Handle For Both Hdu & Sduready To Assemble Unit And Is Assembled With Suitable Kd Fittings , Supplying Of Storage Unit Of Officers Having Dimension 900Wx 450Dx 1219H:Overall Size Of Hinge Door Unit Is 900Mmx1219mm (H)X450 Mm (D).Back Panels: 9Mm White Plt Boardside, Bottom : 18Mm Plb With 0.8Mm Pvc Edgeband Top Panel: 18Mm Plb With 0.8Mm Pvc Edgeband For 1219H Unitsshelf & Separator Panels (If Any) : 18Mm Plt Board With 0.8Mm Pvc Edgeband Bottom Shelf Is Fixed & Other Shelves Have 1 Step Adjustment For Optimizing Space.Hdu: 18Mm Plb With With Edgeband, Suitable Hinges Are Provided.Top And Bottom Panels.Handle: Aluminium Handle For Both Hdu & Sduready To Assemble Unit And Is Assembled With Suitable Kd Fittings , The Overall Size Shall Be 1950X(H) X 1200(W) X 450(D). Aesthetically Appealing Completely Knock - Down Contruction.1 Main Unit Is Of 900Mm(W). Legs Fitted With Screw Type Leveler. Shelving - It Is A 12 Bend Panel Made Of 0.7Mm Thick Crca (D- Grade Is -513). Each Shelf Has Max Load Of 55Kg . Wooden Doors - 2 Door ( Lh - Rh) For 900(W).Made Of 18Mm Thick Prelaminated Twin Board Of E1 -P2 Grade And Approved Shade Confirming To Is- 12823:1990. Soft Closing Hinge. Handle - Aesthetically Appealing Handle Made Of Aluminium.Lipping - Lipping 2 Mm Thick On All The Edges.Locking - Cam Lock With 3 Way Locking Provision.Zinc Alloy Die Cast Housing. , The Overall Size Shall Be 1950X(H) X 900(W) X 450(D). Aesthetically Appealing Completely Knock - Down Contruction.1 Main Unit Is Of 900Mm(W). Legs Fitted With Screw Type Leveler. Shelving - It Is A 12 Bend Panel Made Of 0.7Mm Thick Crca (D- Grade Is -513). Each Shelf Has Max Load Of 55Kg . Wooden Doors - 2 Door ( Lh - Rh) For 900(W).Made Of 18Mm Thick Prelaminated Twin Board Of E1 -P2 Grade And Approved Shade Confirming To Is- 12823:1990. Soft Closing Hinge. Handle - Aesthetically Appealing Handle Made Of Aluminium.Lipping - Lipping 2 Mm Thick On All The Edges.Locking - Cam Lock With 3 Way Locking Provision.Zinc Alloy Die Cast Housing. Total Quantity : 1

Contact Information