|
Supply And Installation Of A 100W Led Luminaire Lumens, Luminous Efficiency 160 Lm/W, Class A Energy Efficiency Rating, Color Temperature Between 4000K And 6500K, Color Rendering Index (Irc) 70, Power Factor 0.92 And Total Harmonic Distortion (Thd) 20%. Must Have A Minimum Lifespan Of 101,000 Hours (L70), Minimum Degree Of Protection Ip66, Impact Resistance Ik08 Or Higher, Integrated Surge Protection (Dps) (Minimum 10Kv), And Operate In Ambient Temperature Range From -5°C To +50°C, With Stable Performance. Injected Aluminum Body, With Efficient Thermal Dissipation System And High-Resistance Polycarbonate Optical Lens, With Protection Against Uv Radiation And Manufacturers Guarantee Regarding Non-Yellowing Throughout The Useful Life Of The Product. The Luminaire Must Be Certified, With An Inmetro Conformity Seal, Meeting The Requirements For Electrical Safety, Photometric Performance And Durability. All Materials, Accessories And Labor For Complete Installation On An Existing Pole, Including Fixing, Electrical Connection, Functional Tests And A Minimum Guarantee Of 5 Years Against Manufacturing Defects, As Per Manufacturer Specifications., Supply And Installation Of 120W Led Luminaire Supply And Installation Of 120W Led Luminaire, Quality And Technology And Comprehensive Customer Service Inmetro Ordinance No. 62/2022. The Equipment Must Have A Nominal Power Of 120W, A Minimum Luminous Flux Of 19,200 Lumens, Supply And Installation Of A 150W Led Luminaire, Quality And Technology And Full Compliance With Inmetro Ordinance No. 62/2022. The Equipment It Must Present A Nominal Power Of 150W, A Minimum Luminous Flux Of 24,000 Lumens, Supply And Installation Of A 180W Led Luminaire. Minimum Brightness Of 28,800 Lumens, Supply And Installation Of Ip Arm 1.8 Meters Supply And Installation Of Arm For Public Lighting (Ip) With 1.80 Meter Projection, In Accordance With Requirements Of The National Institute Of Metrology, Quality And Technology. The Arm Must Be Manufactured From High Mechanical Resistance Carbon Steel, Hot-Dip Galvanized, Ensuring High Durability And Corrosion Resistance. It Must Have A Standard Diameter (Minimum Of 48 Mm To 60 Mm), Adequate Inclination (Approximately 5°) For Better Light Distribution And A Useful Length Of 1.80 M. The Structure Must Safely Support Mechanical Loads And Wind Stresses, Without Deformation, Complying With Current Technical Standards. Uniform, Fault-Free Finish, With Anti-Corrosion Protection For Continuous External Use. Includes Supply Of All Materials, Accessories (Screws, Clamps, Supports) And Labor For Complete Installation On An Existing Pole, Alignment, Tightening, Structural Verification And Stability Tests, Ensuring Safety And Perfect Operation Of The Assembly.
|
