Bids Are Invited For Price Registration, For The Acquisition Of Furniture For Future Contracts At The Conven ... in Brazil

Work Detail

Fixed Chair Approximation P (555 X 520 X 820 Mm) With Dimensional Variation Of 5% Less Or More. Backrest And Seat Injected In High-Resistance Polypropylene Copolymer Standardized By Special Pigments, Has Curvature For Better Adaptation, On The Backrest There Is A Hand Grip To Assist In Moving And Transporting, Aeration Holes In The Elliptical Design And Fixing On The Support Tubes Are Fitted And Fixed By Pins Injected In The Same Material As The Backrest. Seat Is Fixed To The Structure With A Screw. Seat And Back Covering (Color And Tone To Be Defined According To The Manufacturers Chart). The Arm Support Is Integrated Into The Steel Structure Of The Chair With An Injected Polypropylene Finish. Rear Foot Structure, Front Foot, Front Union Beam And Side Union Beam Are Manufactured In Sae1010/1020 Round Steel Tube 22.22 Mm And 1.90 Mm Wall Thickness, Cold Bent, Executed And Calibrated By Cnc Machine, Shoes And Tips In Polypropylene Copolymer Inject, Chair Executive Approximation Aue With Grid (645 X 625 X 860Mm) With Dimensional Variation Of 5% Less Or More. Injected Foam With Controlled Density Of 45 To 55 Kg/M³ With 40 Mm Average Thickness. Backrest Cover Injected In Polypropylene, Assembled By Snap. Structure Injected In Polypropylene Glue Anchor Edge And Channel For Staples. Seat Made From 13 Mm Medium Thickness Plywood. Injected Foam, With Controlled Density Of 45 To 55 Kg/M³ With 50 Mm Average Thickness. Seat Back Cover Injected In Polypropylene, Mounted By Clamps With Zinc Finish. Seat And Back Covering (Color And Tone To Be Defined According To The Manufacturers Chart). Supports Arms Injected In Full Skin Textured Polyurethane, On Round Sae 1020 Steel Core With 7.94 Mm Diameter With Support For Retractable Mechanism For Clipboard, Feet For Fixing The Arm To The Seat Made Of Sae 1020 Steel Sheet With 6.35 Mm Thickness. Mdf Drawing Board With 1, Pue Approximation Executive Chair, With Grid (625 X 720 X 880 Mm) With Dimensional Variation Of 5% Less Or More. Backrest With Injected Foam With Controlled Density Of 45 To 55 Kg/M³ With 40 Mm Average Thickness. Backrest Cover Injected In Polypropylene, Mounted By Snap. Structure Injected In Structured Copolymer Polypropylene With Ribs, Glue Anchor Edge And Channel For Staples. Seat Made From 13 Mm Thick Plywood. Injected Foam With Controlled Density Of 45 To 55 Kg/M³ With 50 Mm Average Thickness. Seat Back Cover Injected In Polypropylene, Mounted By Clamps With Zinc Finish. Supports Arms Injected In Integral Skin Textured Polyurethane, 35 Mm Thick. 18 Mm Thick Mdf Drawing Board With Edge Finish, Joined Together, Fixed Executive Executive Chair Without Armrest (465 X 600 X 880 Mm) With 5% Dimensional Variation Up Or Down. Backrest With Injected Foam With Controlled Density Of 45 To 55 Kg/M³ With 40 Mm Average Thickness. Backrest Cover Injected In Polypropylene, Glue Anchor Edge And Channel For Clips. Seat Made From Resin Multilaminated Plywood, Anatomically Hot Molded, 13 Mm Thick. Injected Foam With Controlled Density Of 45 To 55 Kg/M³ With 50 Mm Average Thickness. Seat Back Cover Injected In Polypropylene, Mounted By Clamps With Zinc Finish. Seat And Back Covering (Color And Shade To Be Defined With

Contact Information