|
School T-Shirt: T-Shirt, Short Sleeve, Made Of Pv Mesh In White (Pantone 11-0601 Tcx), Composed Of 67% Polyester, 33% Viscose, Weight 170G/M². Crew Neck And Cuff On The Sleeves In 1X1 Accordion Knit, Compatible With The Body Fabric (Addition Of 3% Elastane), In Yellow (Pantone 12-0643 Tcx), Measuring (2.0)Cm In Width, Finished, With A Frieze Between The Shirt And The Collar And A Frieze Between The Sleeve Body And The Sleeve Cuff In Lead Gray (Pantone 19-3916 Tcx) Measuring (0.5) Cm Finished, Applied On A Two-Needle Gallon Machine. The Composition And Weight Of The Friezes Must Be The Same As The Body Of The Shirt. On The Chest Left Side Coat Of Arms Of The Municipality Of Birigui, With Its Official Colors And The Writing Below Birigui In Black In Arial Font, High Quality And Definition Screen Printing, Dimensions Proportional To The Sizes Of The Pieces, As Per The Annex Below. Closing The Body, Sleeves And Shoulders Using An Overlok Machine. Bar The Body And Sleeves With (2, 0)Cm On A Two-Needle Galloon Machine With (4, 0)Mm Distance Between The Seams. Labels Applied To The Centralized Internal Back Neck, With The Identification Of The Manufacturer, Cnpj, Fabric Composition, Part Number And Respective Washing Instructions. The Thread Used To Make The T-Shirt Must Be 100% Polyester, No. Composition And Weight Is Or - 5%. The Shirt Must Be Free From Any Defects That Compromise Its Presentation., School Shorts: Bermuda Shorts, Made Of Helanca, 100% Polyester, With A Weight Of 260G/M², In Lead Gray (Pantone 19-3916 Tcx). On The Sides, There Is A Cutout In The Form Of A Band With (5, 0) Cm Wide, Characteristic Of The Fabric, The Same As The Main One, On Each Side Of This Cutout, On The Front, It Has A Finish, Superimposed On A Tubular Construction In Dyed Yarn Of (1, 0) Cm, Continuous Stripe, So That Its Stitching Does Not Allow The Stripe And Its Edges To Fray, In Yellow. (Pantone 12-0643 Tcx). The Waist In A Total Elastic Waistband Measuring (4.0) Cm High, Using A Four-Needle Chain Stitch Machine, Overlock Stitching On The Inside At The Junction Of The Elastic With The Fabric. Finishing Simple Bar With (2, 5)Cm On Two Needle Gallon Machine. On The Left Leg, The Coat Of Arms Of The Municipality Of Birigui Must Be Screen-Printed, With Its Original Colors And The Writing Below Birigui In White (Pantone 11-0601 Tcx) In Arial Font, As Per The Model Below. Label Applied To The Centralized Inner Rear Waistband, With The Manufacturers Identification, Part Number And Respective Washing Instructions. The Thread Used To Make The Shorts Must Be 100% Polyester, In A Color Compatible With The Color Of The Fabric On Which The Seam Is Being Applied. Free From Any Defects That Could Compromise Its Presentation., School Short-Skirt: Short-Skirt, Made Of 100% Polyester Helanca, In Lead Gray (Pantone 19-3916 Tcx). Vertical Cutout On The Left And Right Side Of The Short Skirt, Which Must Follow The Stripe In Yellow (Pantone 12-0643 Tcx), With (5, On Each Side Of This Cutout, So That The Stitching Does Not Allow The Stripe To Fray And Its Edges In Yellow (Pantone 12-0643 Tcx); There Will Be A Stripe On The Hem Of Every Skirt In All Its Hem With A Width Of (2), Made In Fabric Similar To The Main Body, Applied In A Galloon Machine. Side Closure, Entrance
|
