|
Tender For Certain B/R Repair To Aq,Aj And Ae Under Age B/R-I Of Ge(West) Ferozepur Cantt- 1 Demolition Of Un-Reinforced Cement Concrete Of Any Description And In Any Position Not Otherwise Specially Provided For Complete All As Specified And Directed. 2 Dismantling Floor, Hearth Or Wall/Stone Tiling Including Cement Mortar Bedding (But Not Backing), Removing Broken Tiles And Rubbish Off The Premises From Site Complete All As Specified And Directed. 3 Demolition Of Brick Work Built In Cement Mortor Including All Quoins,Arches,Pillars Etc Complete All As Specified And Directed. 4 Demolition Of Stone Slabs And Tiles Of Any Description Or Thickness Laid, Bedded And Pointed In Any Mortar In Floors, Aprons Etc Complete All As Specified And Directed. 5 Taking Down Cement Plaster Of Any Description On Brick Walls Or Concrete Or Stone And Ceilings Including Racking Out Joints, Hacking For Key, Scrubbing Down With Water Etc Complete All As Specified And Directed. 6 Taking Down Eaves Gutters And Rainwater Pipes (Any Size Or Pattern), Including All Fittings, Heads, Shoes, Bends, Swan-Necks, Etc., Including Cleaning Or Refixing Or Removal To Store (Measured Overall As Fixed Along The Centre Line Over Fittings And Accessories) Complete All As Specified And Directed. 7 Taking Up Or Down Existing 15Mm Bore Steel Water Tubing And Connections,Including Clreaning For Refixing Or Removal, Fixed/Laid In Any Situation, Complete All As Specified And Directed. 8 Taking Up Or Down Existing 20Mm Bore Steel Water Tubing And Connections,Including Clreaning For Refixing Or Removal, Fixed/Laid In Any Situation, Complete All As Specified And Directed. 9 M&L For Cutting Holes In Brick Wall Exc Half Bricks But Not Exc One Brick In Cement Mortar For Inserting Holdfasts And Making Good Dismantled Portion In Cement Mortar 1:3 Or Cement Concrete 1:2:4 Type B-1 As Required Complete All As Specified. 10 Dismantling Asbestos Cement(Corrugated,Semicorrugated,Etc)Sheets In Roof Covering Complete All As Specified And Directed By Engineer In Charge. 11 Dismantling Plain Or Corrugated Steel Sheeting, Any Gauge, Thickness, Including Nainital Or Similar Pattern Roof Coverings Complete All As Specified And Directed. 12 Dismantling Of Steel Rolling Shutters Of Any Size Including All Accessories Complete All As Specified And Directed. 13 Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Of Size Not Exceeding 1.5 Sqm Each Including Cutting Holes In Brick Walls Of Appropriate Size For Insertion Of Cement Concrete Blocks For Hold Fasts, And Removing From Site Complete All As Specified And Directed. 14 Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Of Size Exceeding 1.5 Sqm But Not Exceeding 4.00 Sqm Each Including Cutting Holes In Brick Walls Of Appropriate Size For Insertion Of Cement Concrete Blocks For Hold Fasts, And Removing From Site Complete All As Specified And Directed. 15 Taking Down Dhutters Of Any Description Exceeding 1.00Sqm But Not Exceeding 2.00Sqm Each And Removing From Site Complete All As Specified And Directed. 16 Refixing In Same Opeing Shutters Of Any Description Not Exe 2 Sqm Each Complete All As Specified And Directed. 17 Demolition Of Wall And Ceiling Boards (Fibre, Pulp, Insulation, Etc.) Or Insulation Boards/Slabs/ Blankets, Any Thickness, Complete All As Specified And Directed. 18 M & L Cement Concrete (1:2:4) Type B-0 Using 12.5 Mm Graded Crushed Stone Aggregate As In Filling Of Steel Chowkhats Complete All As Specified. 19 Roughening Surfaces Of Old Concrete Floor By Picking, Sweeping Clean And Washing Down With Water To Remove Dust, Etc. All As Specified And As Directed 20 M&L For Lean Cement Concrete (1:5:10) Type E-2 Using 40Mm Graded Crushed Stone Aggregate As In Foundations, Filling And Mass Concrete Complete All As Specified And Directed. 21 M&L For Brick Work Built In Cement Mortar (1:6) With Sub Class B Old Size Bricks, Straight Or Curved On Plan Exceeding 6M Mean Radius Complete All As Specified And Directed. 22 M&L For Brick Work Except Bricks Built In Cement Mortar (1:6) With Sub Class B Old Size Bricks, Straight Or Curved On Plan Exceeding 6M Mean Radius Complete All As Specified And Directed. 23 M & L For Brick Work With Sub Class B Bricks Straight Or Curved On Plan To Any Radius In Half Brick Thick Wall Built In Cm 1:4 Complete All As Specified And Directed. 24 M&L Forming Jambs Etc Built In Cement Mortor 1:6 To Openings Incl Cutting Toothing And Properly Bonding Into To Old Work Also Facing ,Jointoing And Pointing To Match To Existing Work Complete All As Specified. 25 S&F Pressed Steel Frames Made Of 1.25Mm Thick Crca Sheet Of Profile 125X60Mm For Door And Window Frames With One Or More Rebates Incl Lock Strike Plate, Shock Absorbers, 20Mm Dia 60Mm Long Ms Conduit For Housing Of A Drop Bolt, Butt Hinges, Hold Fasts/Lugs Etc And Treating Of Internal Surfaces Of Chowkhats And Hold Fasts/Lugs With A Coat Of Coal Tar Or Black Paint Incl Hinges, Hold Fasts/Lugs Etc Including Making Good Jambs Portion By Providing Plaster In Cm 1:4 And Finishes As Per Existing Complete All As Specified. 26 S&F Pressed Steel Frames Made Of 1.25Mm Thick Crca Sheet Of Profile 105X60Mm For Door And Window Frames With One Rebate Including Lock Strike Plate, Shock Absorbers, 20Mm Dia 60Mm Long Ms Conduit For Housing Of A Drop Bolt, Butt Hinges, Hold Fasts/Lugs Etc And Treating Of Internal Surfaces Of Chowkhats And Hold Fasts/Lugs With A Coat Of Coal Tar Or Black Paint Including Hinges, Hold Fasts/Lugs Etc Complete All As Specified. 27 S&F 1.25 Mm Thick Steel Rolling Shutters, With Out Ball Bearing, As Specified Including Top Cover, An Choring Rod, Hasp And Staple And One Shop Coat Of Primer; Erected In Position As Indicated, Complete: But Mechanical Operated Type With Bevel Gear Box And Crank Handle Complete All As Specified. (Note:- Ball Bearing For Rolling Shutters Will Be Measured Separately.) 28 S&F Ball Bearing For Rolling Shutters All As Specified And Directed. 29 S & F Bottom Plate/Patty 3 Mm Thick 125Mm Height Including Side Lock At Both End For Rolling Shutter Of Any Type And Description, Fixed In Position Complete All As Directed By Engr-In-Charge. 30 S&F Safety Lever Locks Mild Steel With 4 Levers And Fixed In Repairs For Rolling Shutters Complete All As Directed By Engr-In-Charge. 31 Easing Of Wooden Window Shutters/Cb Shutters (One Unit Shall Comprise Of One Window/Cb/Showcase Irrespective Of Number Of Leaves) For Properly Closing/Opening, Tightening Of Hinges Or Changing The Position Of Hinges, Adjustment Of Tower Bolts Sliding Bolts Including Necessary Nail And Screws Etc. 32 Easing Of Wooden Door Shutters (One Unit Shall Comprise Of One Panelled Or Skeleton Door Shutter Irrespective Fo Number Of Leaves) For Properly Closing/Opening, Tightening Of Hinges Or Changing The Position Of Hinges, Adjustment Of Tower Bolts Sliding Bolts Including Necessary Nail And Screws Etc. 33 Welding In Repairs Exc 2.5Cm But N Exc 5Cm In Lengthv And Exc 6Mm But N Exc 9 Cm In Thickness Of Metal To Be Welded Complete All As Specified And Directed By Engineer In Charge Complete All As Specified And Directed. 34 S&F 35Mm Thick Factory Made 2Nd Class Hard Wood (Hollock), Plain Framed, Paneled Shutters, Any Number Of Panels, Panels Shall Be Of 12Mm Thick Bwr Glade Veneered Particle Board Medium Density, Wood Particle Board With Commercial Face Veneers, Size Of Members As Specified In Clause 8.24 (A) Of Mes Schedule Part-I Section-8 Complete All As Specified And Directed. 35 S&F 35Mm Thick Factory Made 2Nd Class Hard Wood (Hollock), Glazed And Skeleton Shutters Open Rebated And Prepared To Receive Glass/ Gauge Etc (Without Sash Bars), Edges Of Framing Plain Chamfered Or Rounded, Fitted With Cut And Mitered Beads For Securing Glass Etc For Doors, Size Of Members As Specified In Clause 8.24 (A) Of Mes Schedule Part-I Section-8, Complete All As Specified And Directed. 36 S&F Of 40Mm Thick Flush Door Shutter Of Solid Core Construction With Block Board Core With Lipping 2Nd Class Hardwood/Beading Both Faces Are Covered With Decorative Laminated Type-I Of Thickness 0.9Mm. Colour And Pattern Shall Be Approved By Engineer-In-Chargee. 37 S&F Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/Neoprene Gasket Required (Fitting Shall Be Paid Separately) With Extruded Built Up Standard Tabular Sections / Appropriate Z Sections And Other Sections Of Approved Make Confirming To Is : 733 And Is:1285, Fixing With Dash Fasteners Of Required Dia And Size, Imcluding Mecessary Fittings Up The Gaps At Junctions, I.E At Top, Bottom And Sides With Required Epdm Rubber/Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Alunimium Snap Beading For Glazing/Panelling, Cp Brass/Stainless Steel Screws All Complete As Per Architectural Frawings And The Directions Of Engineer-In-Charge. 38 S&F Epdm Rubber Beading Around Glass In Aluminium Windows /Ventilator Shutters All As Specified And Directed.. 39 S&F Solar Control Film 25 Micron Reflective Type Sticked To Glass Panes As Per Manufacturers Instruction Complete All As Specified And Directed. 40 S&F In Replacement Factory Made Box Type Steel Windows With Glazing Bars Made Of Erw Tube Hollow \P\ Section Of Size 60Mmx25Mm Double Rebated Outer Frame Comprising Double Shutters Side Hung Skelton & Glazed Shutters, Frame Of Erw Tube \P\ Section Size 50Mmx20Mm With Two Openable Leaf For Each Shutter Consisting Two Nos Sash Bar Of T-Section 20Mmx3Mm Welded To Frame With One Vertical Mullion Of Erw Box Type T-Section Of Size 60Mmx25Mm And Mild Steel Flat Iron 2Mm Thick Welded/ Screwed To Frame For Fixing Of Wire Gauge To Frame/ Shutters As Given Below And All As Shown On Drawing No. Cejz/Td-1019/08 And Cejz/Td-1020/08 Sheet No. 1/3 To 3/3 Including Taking Down Of Old Existing Window Complete All As Specified And Directed :- (I) Hold Fast,150Mm Long Of Flat Iron 12Mmx3Mm- 04Nos Per Window (Ii) Handle Of Z Section 20Mmx25Mm,100Mm Long-01Nos Per Leaf (Iii) Ms Tower Bolt 150Mm Long-02 Nos Per Leaf (Iv) Z Section 20Mmx25Mm,100Mm Long Stopper -01 Nos Per Leaf (V) Cleat 55Mm Long Of Hollow Square 15Mmx12Mm -02 Nos Per Leaf (Vi) Ms Pintol Hinges Size 75Mmx12Mm- 2 Nos. Per Leaf (Vii) Making Good Dismantled Portion In Pcc 1:2:4 Type B-1 For Hold Fasts (Four Nos For Each Window). (Viii) Preparation Of Steel Surfaces Of Windows And Grills And Guard Bars And Applying One One Shop Coat Of Zinc Chromate Primer And Two Coats Of Synthetic Enamel Paint After Installtion At Site. Note: Glass Panes And Grills & Guard Bars Shall Be Measured And Paid For Separately .Area Shall Be Measured Flat For One Side Only For The Purpose Of Measurement And Payment . 41 S&F In Replacement Factory Made Box Type Steel Windows With Glazing Bars ( With Provision Of Opening Of Size 2Feetx2.5Feet For Cooler) Made Of Erw Tube Hollow \P\ Section Of Size 60Mmx25Mm Double Rebated Outer Frame Comprising Double Shutters Side Hung Skelton & Glazed Shutters, Frame Of Erw Tube \P\ Section Size 50Mmx20Mm With Two Openable Leaf For Each Shutter Consisting Two Nos Sash Bar Of T-Section 20Mmx3Mm Welded To Frame With One Vertical Mullion Of Erw Box Type T-Section Of Size 60Mmx25Mm And Mild Steel Flat Iron 2Mm Thick Welded/ Screwed To Frame For Fixing Of Wire Gauge To Frame/ Shutters As Given Below And All As Shown On Drawing No. Cejz/Td-1019/08 And Cejz/Td-1020/08 Sheet No. 1/3 To 3/3 Including Taking Down Of Old Existing Window Complete All As Specified And Directed :- (I) Hold Fast,150Mm Long Of Flat Iron 12Mmx3Mm- 04Nos Per Window (Ii) Handle Of Z Section 20Mmx25Mm,100Mm Long-01Nos Per Leaf (Iii) Ms Tower Bolt 150Mm Long-02 Nos Per Leaf (Iv) Z Section 20Mmx25Mm,100Mm Long Stopper -01 Nos Per Leaf (V) Cleat 55Mm Long Of Hollow Square 15Mmx12Mm -02 Nos Per Leaf (Vi) Ms Pintol Hinges Size 75Mmx12Mm- 2 Nos. Per Leaf (Vii) Making Good Dismantled Portion In Pcc 1:2:4 Type B-1 For Hold Fasts (Four Nos For Each Window). (Viii) Preparation Of Steel Surfaces Of Windows And Grills And Guard Bars And Applying One One Shop Coat Of Zinc Chromate Primer And Two Coats Of Synthetic Enamel Paint After Installtion At Site. Note: Glass Panes And Grills & Guard Bars Shall Be Measured And Paid For Separately .Area Shall Be Measured Flat For One Side Only For The Purpose Of Measurement And Payment . 42 S&F In Replacement Factory Made Box Type Steel Ventilators Side / Top Hung With Glazing Bars Or Dovetailed Or Welded Made Of Erw Tube \P\-Section Of Size 60Mmx25Mm Outer Frame ( Single Rebated), Comprises Glazed Shutter, Frame Of Erw Tube And Mild Steel Flat Iron 2Mm Thick Welded/Screwed To Frame For Fixing Of Sheet Glass Including Fixture And Fittings Like As Stopper, Cleat, Pintal Hinges, Holdfast Etc All As Shown Ondrawing No. Cejz/Td-1019/08 And Cejz/Td-1020/08 Sheet No. 1/3 To 3/3 Including Taking Down Of Old Existing Window Complete All As Specified And Directed:- Note : 1. Grills And Guard Bars, Sheet Glass And Wiremesh Shall Be Measured And Paid Separately. 2. Making Good Dismantled Portion In Pcc 1:2:4 Type B-1 For Hold Fasts (Four Nos For Each Window). 3. Preparation Of Steel Surfaces Of Ventlators And Applying One One Shop Coat Of Zinc Chromate Primer And Two Coats Of Synthetic Enamel Paint After Installtion At Site. 4. Area Shall Be Measured Flat For One Side Only For The Purpose Of Measurement And Payment . 43 S&F Mild Steel Framed Work With Fe.290.Gde-E-165, Such As Grills, Gratings, Etc.. With Ends Of Bars Shouldered And/Or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework Of Water Tanks And Similar Work Complete All As Specified And Directed. 44 S&F 50Mmx47Mm Size Solid Pvc Door Frame Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With Ms Square Tube, Complete All As Specified Shown On Drawing And Specified And Directed. 45 S&F Factory Made 30Mm Thick (Style) Solid Panel Pvc Door Shutter Consisting Of Frame Made Out Of Ms Tubes For Top & Bottom Rails, Ms Frame Covered With Heat Moulded Plain Colour Pvc ‘C’ Channel Having A Pvc Sheet Strip Of 20 Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Paneling Of Plain Colour Pvc Sheet To Be Fitted In The Ms Frame Welded/Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading And Jointed Together With Solvent Cement, In The Frame At Site As Per Clause 8 B.2.1 Of Mes Schedule Part-Ii (2004) Complete All As Specified Shown On Drawing And Specified And Directed. 46 S&F 300Mm Long Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy Complete All As Specified And Directed. 47 S&F 300Mm Size Mild Steel Helical Door Spring Ordinery Rat Rail Rod Pattern Spring Including Roller And Roller Plate Complete All As Specified And Directed, 48 S&F In Repairs 300Mm Size Mild Steel Helical Door Spring Ordinery Rat Rail Rod Pattern Spring Including Roller And Roller Plate Complete All As Specified And Directed, 49 S & F Mild Steel Pressed Handle, Oval Type, 125 Mm Size, Stove Enameled Black And Fixed With Steel Screws, Complete All As Specified. 50 S&F 200 Mm Ms Barrel Tower Bolts Stone Enamelled Black With Bright Bolt And Fixed Complete All As Specified. 51 S&F 150Mm Long Ptmt Tower Bolts And Fixed With Steel Screws Complete All As Specified And Directed. 52 S&F 100Mm Long Ptmt Butt Hinges And Fixed With Steel Screws With Brass /Bronze Hinges Pin Complete All As Specified And Directed. 53 S&F 150Mm Long Ptmt Handle And Fixed With Steel Screws Complete All As Specified And Directed. 54 S&F In Repairs Aluminium Body Hydraullically Regulated Door Closer Universal Type, Suitable For Door Shutters Of 851 To 1000Mm Width & Of Weight Between 61 To 80Kg Complete Allas Specified And Diected. 55 S&F Stainless Steel Wire Cloth, 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm And Fixed With Stainless Steel Wire Staples Complete All As Specified And Directed. 56 S&F In Repairs Stainless Steel Wire Cloth, 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm And Fixed With Stainless Steel Wire Staples Complete All As Specified And Directed. 57 S&F 5.5Mm Thick, Plain Sheet Glass, Selected Quality And Glazing, With Oil Putty Or With Wooden/ Epdm Rubber Beads (Supplied Alongwith Shutters), In Squares Exceeding 0.50 Sqm In Each Pane Complete All As Specified And Directed. 58 S&F 3.0Mm Thick, Plain Sheet Glass, Ordinary Quality And Glazing, With Oil Putty Or With Wooden Beads (Supplied Alongwith Shutters), In Squares N.Exc 0.50 Sqm In Each Pane Complete All As Specified And Directed. 59 S&F Structural Steel Fe-410- W(Gde E-250) Quality B Rolled Sections As In Roof Trusses (Framed), Trussed,Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc.Tes Complete All As Specified And Directed. 60 M&L For 75Mm Thick Plain Cement Concrete (1:3:6) Type C-1 Using 20Mm Graded Crushed Stone Aggregate As In Plinth Protection And All Other Similar Works , Surface Finished Even And Fair Complete All As Specified And Directed. 61 M&L For 25Mm Thick Plain Cement Concrete (1:2:4) Type B-1 Using 20Mm Graded Crushed Stone Aggregate As In Surface Finished Rough To Receive Floor Topping, Surface Finished Even And Fair Complete All As Specified And Directed. 62 M&L For 10Mm Thick (Square/ Rectangular) Vitrified Tiles, Light Colour, Polished, Area Of Each Tile Exceeding 0.36Sqm And Not Exceeding 0.42 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Colour Of Tiles Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cement Mortar (1:6) Complete All As Specified And Directed. 63 M&L For 7 To 8 Mm Thick (Square/ Rectangular) Non-Skid Ceramic Tiles Coloured, Premium Quality, Joint-Free, Area Of Each Tile Exceeding 0.11Sqm But Not Exceeding 0.18Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Colour Of Tiles Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cement Mortar (1:6) Complete All As Specified And Directed. 64 M&L For 7 To 8 Mm Thick (Square/ Rectangular) Non-Skid Ceramic Coloured Tiles, Joint-Free, Premium Quality, Area Of Each Tile Exceeding 0.11Sqm But Not Exceeding 0.18Sqm, In Vertical Surfaces Such As Skirtings, Dados, Risers And Steps Etc Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Colour Of Tiles Over And Including 10Mm Thick Rendering Cement Plaster In Cement Mortar (1:4) Complete All As Specified And Directed. 65 M&L For 7 To 8 Mm Thick Glazed Coloured And Cereamic Tiles In Vertical Surfaces 350 X 250 Mm / 450 X 300 Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match In Dados And Vertical Surfaces Over And Including 10Mm Thick Rendering Cement Plaster In Cement Mortar (1:4) Complete All As Specified And Directed. 66 M&L For Machine Cut Kota Stone Slab Flooring 20-25Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cement Mortar (1:6) Complete All As Specified And Directed. 67 M&L For Kota Stone Slab 20-25Mm Thick In Riser Of Steps, Skirting, Dado And Pillar Laid Over Cemen Screed And Jointed Over And Including 10Mm Thick Rendering Cement Plaster In Cement Mortar (1:4) Complete All As Specified And Directed. 68 M&L For Providing And Laying 60Mm Thick Factory Made Chamfered Edge Cement Concrete Paver Block Of M-35 Grade With Approved Colour, Design & Pattern As In Footparth, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc., Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over And Including 50Mm Thick Compacted Bed Of Fine Sand, Compacting And Proper Embedding/ Laying Of Inter Locking Paverblocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand Complete All As Specified And Directed. 69 M&L For 15Mm Thick Rendering Cement Plaster In Cement Mortar (1:6) On Fair Faces Of Brick Walls Or Concrete Surfaces, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. 70 M&L For 15Mm Thick Rendering Cement Plaster In Cement Mortar (1:4) On Other Than Fair Faces Of Brick Walls Or Concrete Surfaces, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. 71 M&L For 5Mm Thick Rendering Cement Plaster In Cement Mortar (1:3) On Concrete Surfaces, Finished Even And Smooth Without Using Extra Cement As In Ceiling Complete All As Specified And Directed. 72 M&L For 15Mm Thick Cement Plaster In Cement Mortar (1:3) With Water Proofing Compound On Walls And In Sunken Floor Portion Finished Even And Smooth With Out Using Extra Cement Complete All As Specified And Directed. Note:- Wpc Shall Be Measured And Paid Separately. 73 M&L For Water Proofing Treatment To Sunken Floors Of Kitchen, Toilets, Laboratories, Bath And WcS Etc Shall Be As Under :- (I) Application Of Two Components Of Acrylic Modified Cementitious Coating(Aa) Clean The Rcc Surface With Wire Brush And Chisel Out And Mortar Sticking To Surface(Ab) Apply Fosroc Nitoproof 600 Pf (Min 0.8Mm Dft) Over A Priming Coat Of Nitoproof Wb Primer Or Equivalent Of Asian Paint/Sika/Berger/Pidilite Dr Fixit(Ac) Provide Hdpe 1.0Mm Thick Sheet Before Laying Of Any Floor Finishes. 74 S & F In Repair To Hollow Pvc Wall Lining Consisting Of 5Mm Thick Single Side Prelam Pvc Sheet Instead Of Plain Colour Sheet Inclusive Of Solvent Cement And Fixing On Pvc Frame As Per Specified In Mes Schedule Part-I & Ii Complete All As Specified And Directed. 75 S & F In Rep Of Gypsum Board 6-7 Mm Thick In Ceiling Fixed With Screw 60X60Cm Placed In Ceiling (Angle 25Mm X 25Mm , Main Tee 38Mmx23Mm ,Sub Tee 23Mmx23Mm) Incl Aluminium Anodised Snap Grid Frame 605X605 Mm For False Ceiling Incl Hanging Arrangement Complete All As Specified And Directed By Engineer In Charge. 76 S&F 0.50Mm Thick Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screw Complete All As Specified Complete All As Specified And Directed. 77 S&F 0.50Mm Thick Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheetof An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screw Complete All As Specified 78 M&L For Preparing New Plastered Surfaces Of Walls And Applying Three Coats Of Lime White Wash Complete All As Specified And Directed. 79 M&L For Preparing Newly Plastered Surfaces Of Walls And Applying Two Coats Of Cement Base Paint Over A Coat Of Primer Complete All As Specified And Directed. 80 M&L For Preparation Of New Wood Or Wood Based Surfaces Of Any Description, Not Otherwise Described, Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over One Coat Of Pink Primer Complete All As Specified And Directed. 81 M&L For Preparation Of New Steel And Iron Surfaces Of Any Description, Not Otherwise Described, Over 10 Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Zinc Chromate Complete All As Specified And Directed. 82 S&F 110Mm Bore Pvc (Swr) Pipe Single Socketed, In Any Length With Rubber Ring Joints, Fixed To Walls Or Floor Complete All As Specified And Directed.Note:- Only Pipe Along The Centre Line Shall Be Measured And Paid Except Fittings And Accessories Which Shall Be Measured And Paid For Separately Under Respective Items.) 83 S&F 75Mm Bore Pvc (Swr) Pipe Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches Complete All As Specified And Directed.Note:- Only Pipe Along The Centre Line Shall Be Measured And Paid Except Fittings And Accessories Which Shall Be Measured And Paid For Separately Under Respective Items.) 84 S&F 75Mm Dia Pvc (Swr) Bends With Access Door Any Radius Complete All As Specified And Directed. 85 S&F 110Mm Dia Pvc (Swr) Bends With Access Door Any Radius Complete All As Specified And Directed. 86 S&F 110 Mm Dia Pvc (Swr)Junction Single (Single Or Double \T\) Equal Or Unequal Complete All As Specified And Directed. 87 S&F 110Mm Dia Pvc (Swr) Vent Cowl Complete All As Specified And Directed. 88 S&F Stack Clamps For 110Mm Dia Pipe Made Out Of 50 Mm By 5 Mm Flat Iron And 16Mm Dia Round Iron Stays, Including Bolts And Nuts And Securing Ends Of Stays To Wall Or Roof Complete All As Specified And Directed. 89 Supplying And Laying Of 20Mm Cpvc Pipes Sdr 11 & Plain Cpvc Sdr 11 Fittings On Walls/Ceiling Or Laying In Floors Complete All As Specified. 90 Supplying And Laying Of 25Mm Cpvc Pipes Sdr 11 & Plain Cpvc Sdr 11 Fittings On Walls/Ceiling Or Laying In Floors Complete All As Specified. 91 M&L For Removing Loose And Broken Concrete By Chiseling/Picking Etc Upto A Depth Of 20 To 40Mm From Floor/Roof Slab And Similar Structural Members Cutting Edges Cleaning The Dismantled Portion With Wire Brushes Etc To Remove Dust, Dirt And Other Foreign Particles Etc And Washing With Clean Water With Pressure And Removal Of Debries To A Distance Not Exc 500 M All As Specified And Directed By Engineer-In-Charge. (Note:- Rates Are Including Necessary Scaffolding And Work Done Up To Height Of Double Story). 92 M&L For Applying One Coat Of Anti Corrosive Primer As Per Manufacturers Insturctions To Exposed Old And New Reinforcement To The Full Circumferences And Length Of Bars To Form Unbroken 40Micron Thick Film In The Area Prepared Vide Item No. 73 Above All As Specified And Directed By Eng-In-Charge. Make : Fosroc (Nitozine Primer) Or Equivalent In Mc Bauchemic/S.Beck All As Specified And Directed. (Note:- Rates Are Including Necessary Scaffolding And Work Done Up To Height Of Double Story). 93 M&L For Application Of High Build Polymer Modified To Ceiling Of Mortar 40Mm Thick In Two Layers To Surfaces A Coat Of Bonding Agent In The Ratio Of (1: 3) Cement Mortar For Plaster @ 4 Kg Sbr Per Bag Of Cement Appled As Per ManufacturerS Instrutions All As Specified And Directed.(Note:- Rates Are Including Necessary Scaffolding And Work Done Up To Height Of Double Story). 94 S&F In Repairs 20Mm Bore Gun-Metal, Globe Or Gate Valves, With Iron Wheel Head, Screwed Both Ends For Iron Pipes Complete All As Specified And Directed. 95 S&F In Repairs Wash Hand Basins, Vitreous China (Flat Back) White Of Size 550Mm X 400Mm Including Cutting For And Pinning In Ends Of Brackets Or Erecting Stand Including Waste Fittings, 32 Mm Bore Pvc Flush Pipe With Long Screwed Shucks And Fly Nuts And Including Pvc Discharge Pipe Complete All As Specified And Directed. 96 S&F In Repairs Vitreous China Squatting Pan, \Orissa Pattern\, Size 580X440Mm White/ Coloured With Integral Foot Rests (Excluding Flushing Cistern, Flush Pipe And Waste Pipe), Including Trap And Connection To Trap, And To Flushing Pipe, Anti-Syphonage Pipe, Etc.Complete Including All Joints And Making Good To Floors Complete All As Specified And Directed. 97 S&F In Repairs Vitreous China Wash Down Water Closet Pan (Pedestal Pattern) Complete, White/ Coloured Including Seat And Cover, Trap, Including Connection To Drain (Or Outgoing Pipe), And To Flushing Pipe, Anti-Syphonage Pipe, Etc. Etc.Complete Including All Joints And Making Good To Floors Complete All As Specified And Directed. 98 S&F In Repairs Vitreous China Urinals, Flat Back Of Size 465X355X265Mm Complete Including Providing And Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar 1:2, Securing Urinal To Plugs With And Including 60Mm Long Brass Screws, Pointing Around Urinal Back In Cement; Fixing Automatic Flushing Cistern With Brackets, Flush Pipe, Grating And Union For Discharge Pipe. (Exclusive Of Fixing Supply Pipe To Flushing Cistern, Trap And Waste Pipe) Complete Including All Joints And Making Good To Floors Complete All As Specified And Directed.
|
