Tenders Are Invited For Procurement Of Farm Machinery in Ethiopia

Work Detail

Tenders are invited for Procurement of Farm Machinery. 1 Baler (manual small scale) Fully manual operation. Machine size 0.75 m x 0.65m x 1.5 m. Bale size 500 mm x 500 mm x 650 mm. Lever-action manual press, Top-down vertical plunger operated. Bale shape: Rectangular/square. Equipped with a single high-traction tire and a dual-handle system. Made of heavy-duty reinforced steel. pc 27 2 Electric pump Heavy-duty electric surface irrigation pump, head 23m, distance 50 m, discharge rate 17 l/s, HP 5.5 kw, inlet 3-inch, outlet 2.5 inch pc 1 3 Ground balance (Grain balance) Electric-powered digital balance, movable with 4 wheels and vertical back support. Dimension 50 cm x 50 cm. Capacity 350 kg. Pc 12 4 Small-scale forage chopper Electric Power: 2 hp Voltage: 127 or 220V Frequency: 60 Hz Type: Single-phase Rotation: 3,600 rpm PRODUCTION Sieve 3 mm: 130/300 kg/h (Fine bran) Sieve 5 mm: 250/700 kg/h (Coarse bran) Sieve 12 mm: 150/430 kg/h (Roller) Smooth sieve: 500/1,200 kg/h (Green feed) pc 6. 5 Solar pump with accessories Solar Driven Dynamo for 500 L/Min @10 m Head Spec Dynamo (Motor): 3-phase induction motor, 2.2 kW (3 HP), TEFC, IP55, Insulation Class F, 4 pole (1450 rpm), S1 continuous duty, foot-mounted (B3). Pump: End suction centrifugal, sized for 500 L/min @ 10 m head (confirm pump curve with supplier). + coupling adapter Solar PV modules: 5 × 400 W (or equivalent 2.2 kW p) Controller / Drive: Solar-capable VFD / MPPT + VFD sized 2.2 kW (supports PV-fed DC bus or AC-coupled operation). VFD must support softstart and solar MPPT operation or be paired with an MPPT. Discharge pipe: DN65 (2½") or DN80 (3") recommended to maintain velocity ~1.52.5 m/s choose based on friction loss calculations. Suction: foot valve + strainer if suction-lift used; keep suction lift 5 m for surface pump. NPSH: confirm pump NPSHreq with manufacturer; keep margin >12 m. Use a non-clog impeller if intakes may contain debris. Solar-capable VFD (2.2 kW) or MPPT + VFD combo PV combiner box, DC isolator, DC fuses AC breaker + motor overload relay + contactor (if required by VFD setup) Cables: PV DC cables, motor power cable (1.52.5 mm²), earthing conductors Baseplate, flexible coupling, coupling guard, foot valve/strainer, pressure gauge NB. Should include installation and warranty pc 1 Etc. Tender Link : http://www.ilri.org/tenders

Contact Information