Tender For Proposed Construction Of Type 2 (G+1) 4 Unit Residential Building In Talbehat, Distt.- Lalitpur ( ... in India

Work Detail

Tender for Proposed Construction Of Type 2 (G+1) 4 Unit Residential Building In Talbehat, Distt.- Lalitpur (U.P.) , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And For All Lift, As Directed By Engineer-Incharge. Excavation Work By Mechanical Means /Manual Means Upto 1.5 M. , Excavating, Supplying, Stacking And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Foundation Trenches, Plinth, Sides Of Foundation Etc. Complete For All Lift. , Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Diluting And Injecting Chemical Emulsion For Post Constructional Anti-Termite Treatment (Excluding The Cost Of Chemical Emulsion) :Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2(1 Cement : 2 Coarse Sand) To Match The Existing Floor:With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration. , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete In Foundaction , Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level :1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Lll) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominalsize Derived From Natural Sources) , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up Tofloor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement :1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Lll) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Brick Work With (Non Modular) Bricks Of Class Designation 15 In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Half Brick Masonry W (Non Modular) Bricks Of Class Designation 15In Superstructure Above Plinth Level Up To Floor V Level.Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Providing And Laying Damp-Proof Course 40 Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Lll) Derived From Natural Sources : 4 Graded Stone Aggregate 12.5 Mm Nominal Size Derived From Natural Sources) , Providing & Applying A Coat Of Residual Petroleum Bitumen Of Grade Of Vg-10 Of Approved Quality Using 1.7Kg Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With Apiece Of Cloth Lightly Soaked In Kerosene Oil. , Providing And Laying Integral Cement Based Water Proofing Treatment Including Preparation Of Surface As Required For Treatment Of Roofs, Balconies, Erraces Etc Consisting Of Following Operations: (A) Applying A Slurry Coat Of Neat Cement Using 2.75 Kg/Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is. 2645 And Approved By Engineer-In-Charge Over The Reinforced Cement Concrete Slab Including Adjoining Walls Upto 300 Mm Height Including Cleaning The Surface Before Treatment. (B) Laying Brick Bats With Mortar Using Broken Bricks/Brick Bats 25 Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 (1 Cement : 5 Coarse Sand) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 (1 Cement :5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Of Junctions Of Walls And Slabs.(C) After Two Days Of Proper Curing Applying A Second Coat Of Cement Slurry Using 2.75 Kg/ Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineerin- Charge. (D) Finishing The Surface With 20 Mm Thick Jointless Cement Mortar Of Mix 1:4 (1 Cement :4 Coarse Sand) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineerin- Charge Including Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finishing The Surface With Trowel With Neat Cement Slurry And Making Pattern Of 300X300 Mm Square 3 Mm Deep. (E) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test.All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In-Charge : With Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 65 Mm. , Supply & Fixing Of Flush Doors Commercial Quality Conforming To Is 2202 Part-1 (1983) Including Fixing Of Wooden Cleats & Stoppers And Including Fixing And Adjustment Of Hinges, Bolts Locks Handles, Springs And Other Fitting But Excluding Their Supply And Including Painting With Two Coats Of Black Japan Paint On Iron Fitting Of Necessary Fitting With Departmentally. 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Supply & Fixing Of Flush Doors Commercial Quality Conforming To Is 2202 Part-1 (1983) Including Fixing Of Wooden Cleats & Stoppers And Including Fixing And Adjustment Of Hinges, Bolts Locks Handles, Springs And Other Fitting But Excluding Their Supply And Including Painting With Two Coats Of Black Japan Paint On Iron Fitting Of Necessary Fitting With Departmentally. 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws Both Side Laminated , Providing And Fixing M.S. Tubular Frames For Doors, Windows, Ventilators And Cupboard With Rectangular/ L-Type Sections, Made Of 1.60 Mm Thick M.S. Sheet, Joints Mitred, Welded And Grinded Finish, With Profiles Of Required Size, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer.Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10x10 Cm Of cement concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete . Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , 15Mm Cement Plaster On Rough Side Of Mix 1:4 (1 Cement : 4 Coarse Sand) , 12 Mm Cement Plaster Of Mix 1:6 (1 Cement: 6 Coarse Sand) , 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix:1:6 (1 Cement: 6 Coarse Sand) , Forming Groove Of Uniform Size From 12X12 Mm And Upto 25X15 Mm In The Top Layer Of Washed Stone Grit Plastered Surface As Per Approved Pattern, Including Providing And Fixing Aluminum Channels Of Appropriate Size And Thickness (Not Less Than 2 Mm), Nailed To The Under Layer With Rust Proof Screws And Nails And Finishing The Groove Complete As Per Specifications And Direction Of The Engineer-In-Charge. , Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades,Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand),Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm. , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete.Size Of Tile 600X600 Mm. , Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills , Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Area Of Slab Over 0.50 Sqm Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent , Providing Edge Moulding To 18 Mm Thick Marble Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge. Granite Work , Kota Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) :25 Mm Thick , Kota Stone Slabs 20 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete. , Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm(Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement :4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc.Complete. , Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm,Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture. , Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade: New Work (Two Or More Coats Applied @ 1.43 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Lit/10 Sqm) , Distempering With 1St Quality Acrylic Distemper (Ready Mixed) Having Voc Content Less Than 50 Gram/Litre, Of Approved Manufacturer And Of Required Shade And Colour All Complete To Achieve Even Shade And Colour. New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Having Voc Content Less Than 50 Gram/Litre . , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Providing & Fixing Glass Panes With Putty And Glazing Clips In Steel Doors, Windows, Clerestory Windows, All Complete With : 4.0 Mm Thick Glass Panes , Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete : 250X16 Mm , Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, (Barrel Type) With Necessary Screws Etc. Complete :(A) 250 Mm X 10Mm , Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, (Barrel Type) With Necessary Screws Etc. Complete :(A) 200 Mm X 10Mm , Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete : 125 Mm , providing and Fixing Curtain Rods Of 1.25Mm Thick Chromium Plated Brass Plate, With Two Chromium Plated Brass Brackets Fixed With C.P. Brass Screws And Wooden Plugs Etc. Wherever Necessary Complete (A) 25 Mm Dia. , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Decorative One Side High Pressure Laminated Sheet Of Plain / Wood Grain In Gloss / Matt / Suede Finish With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 25 Mm Thick (For Cupboard) Including Isi Marked Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws , Construction Of Drain Along With Apron. 230X230mm , Providing & Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc. Including Welding, Grinding, Buffing, Polishing & Making Curvature (Wherever Required) & Fitting The Same With Necessary Stainless Steel Nuts & Bolts Complete I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Eng-In-Charge. (Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts , Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required : W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid , Providing & Fixing White Vitreous China Wash Basin With C.I. Brackets Painted White, 15 Mm C.P. Brass Pillar Taps, C.P. Brass Chain With Rubber Plug, 32Mm C.P. Brass Waste Of Standerd Pattern Including Cutting & Making Good The Walls Wherever Required. A)White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps , Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete.Semi Rigid Pipe 32 Mm Dia , Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete.Semi Rigid Pipe 40 Mm Dia , Providing And Fixing 600X450mm Bevelled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. , Providing And Fixing Ptmt Bottle Trap For Wash Basin And Sink Bottle Trap 38 Mm Single Piece Moulded With Height Of 270 Mm, Effective Length Of Tail Pipe 260 Mm From The Centre Of The Waste Coupling, 77 Mm Breadth With 25 Mm Minimum Water Seal, Weighing Not Less Than 263 Gms , Providing And Fixing Ptmt Liquid Soap Container 109 Mm Wide, 125 Mm High And 112 Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour, Weighing Not Less Than 105 Gms. , Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour.600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighing Not Less Than 190 Gms. , Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is:13983 With C.I. Brackets And Stainless Steel Plug 40 Mm, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required Kitchen Sink With Drain Board 510X1040 Mm Bowl Depth 250 Mm , Providing And Fixing Unplasticised Pvc Connection Pipe With Brass Unions 45 Cm Length.15 Mm Nominal Bore , Providing And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Is:8931 A) 15 Mm Nominal Bore , Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms.A) 15 Mm Nominal Bore , Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Gyser Points Of Approved Quality Conforming To Is:8931 A) 15 Mm Nominal Bore , Providing And Fixing C.P. Brass Shower Rose With 15 Or 20Mm Inlet100 Mm Diameter , Providing And Fixing C.P. Brass Stop Cock (Concealed) Of Standard Design And Of Approved Make Conforming To Is:8931:15Mm Nominal Bore , Providing And Fixing Unplasticised-Pvc Pipe Clips Of Approved Design To Unplasticised-Pvc Pipes By Means Of 50X50x50 Mm Hard Wood Plugs, Screwed With Ms Screws Of Required Length Including Cutting Brick Work And Fixing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) And Making Good The Wall Etc. Complete.110Mm , Providing And Laying Cement Concrete 1:5:10(1 Cement : 5 Coarse Sand : 10 Graded Stone Aggregate 20Mm Nominal Size) Around P.V.C Soil And Waste Pipe Including Bed Concrete As Per Standard Design(Embedded In The Flooring / Ground)100 /90 Mm Dia , Providing And Fixing On Wall Face Unplasticised-Rigid Pvc Rain Water Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10Mm Gap For Thermal Expansion. 110 Mm , Providing And Fixing On Wall Face Unplasticised Pvc Moulded Fittings/Acces.Ies For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is:13592 Type A Including Jointing With Seal Ring Conforming To Is:5382 Leaving 10Mm Gap For Thermal Expansion.Bend 87.5 Degree 110 Mm Bend , Providing And Fixing On Wall Face Unplasticised Pvc Moulded Fittings/Acces.Ies For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is:13592 Type A Including Jointing With Seal Ring Conforming To Is:5382 Leaving 10Mm Gap For Thermal Expansion.Bend 87.5 Degreeshoe (Plain)110 Mm Shoe , Providing And Fixing To The Inlet Mouth Of Rain Water Pipe Cast Iron Grating 15 Cm Diameter And Weighing Not Less Than 440 Grams. , Providing And Fixing Unplasticised-Pvc Pipe Clips Of Approved Design To Unplasticised-Pvc Rain Water Pipes By Means Of 50X50x50 Mm Hard Wood Plugs, Screwed With Ms Screws Of Required Length Including Cutting Brick Work And Fixing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) And Making Good The Wall Etc. Complete.110 Mm , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testiang Of Joints Complete As Per Direction Of Engineer In Charge.Concealed Work Including Cutting Chases And Making Good The Walls Etc.20Mm Dia Nominal Outer Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testiang Of Joints Complete As Per Direction Of Engineer In Charge.Concealed Work Including Cutting Chases And Making Good The Walls Etc.25Mm Dia Nominal Outer Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testiang Of Joints Complete As Per Direction Of Engineer In Charge.Concealed Work Including Cutting Chases And Making Good The Walls Etc.32Mm Dia Nominal Outer Dia Pipes , Providing And Fixing Gi Pipes Complete With Gi Fittings And Clamps, Including Cutting And Making Good Walls Etc. (Internal Work).Internal Work-Exposed On Wall.25Mm Dia Nominal Bore , Providing And Fixing Gi Pipes Complete With Gi Fittings And Clamps, Including Cutting And Making Good Walls Etc. (Internal Work).Internal Work-Exposed On Wall.32Mm Dia Nominal Bore , Providing And Fixing Gi Pipes Complete With Gi Fittings And Clamps, Including Cutting And Making Good Walls Etc. (Internal Work).Internal Work-Exposed On Wall.40Mm Dia Nominal Bore , Providing And Fixing Gi Union In Gi Pipes Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete (New Work).25Mm Dia Nominal Bore , Providing And Fixing Gi Union In Gi Pipes Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete (New Work).32Mm Dia Nominal Bore , Providing And Fixing Gi Union In Gi Pipes Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete (New Work).40Mm Dia Nominal Bore , Providing And Fixing Gi Union In Gi Pipes Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete (New Work).50Mm Dia Nominal Bore , Providing And Fixing Gun Metal Gate Valve With Wheel Of Approved Quality.25Mm Dia Nominal Bore , Providing And Fixing Gun Metal Gate Valve With Wheel Of Approved Quality.32Mm Dia Nominal Bore , Providing And Fixing Gun Metal Gate Valve With Wheel Of Approved Quality.40Mm Dia Nominal Bore , Providing And Fixing Gun Metal Gate Valve With Wheel Of Approved Quality.50Mm Dia Nominal Bore , Providing And Placing On Terrace (At All Floor Levels)Polyethylene Water Storage Tank Isi : 12701 Marked Indicating The Bis License No. With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Over Flow Pipes But Without Fitting And Base Support For Tank.[Sintex, Electroplast, Star, Lotus Or Equivalent Having Valid Isi License].Capcity In Per Liters , Excavating Trenches Of Required Width For Pipes, Cables Etc. Including Excavation For Sockets And Dressing Of Sides, Ramming Of Bottoms, Depth Upto 1.5M Including Getting Out The Excavated Soil, And Then Returning The Soil As Required, In Layers Not Exceeding 20Cm In Depth Including Consolidating Each Deposited Layer By Ramming, Watering Etc. And Disposing Of Surplus Excavated Soil As Directed, Within A Lead Of 50M.All Kinds Of Soil Pipes, Cables Etc. Exceeding 80Mm Dia But Not Exceeding 300Mm. , Providing, Laying And Jointing Glazed Stoneware Pipes Grade A With Stiff Mixture Of Cement Mortar In The Proportion Of 1:1 (1 Cement : 1 Fine Sand) Including Testing Of Joints Etc. Complete.100Mm Diameter , Providing And Laying Non Pressure Np 2 Class (Light Duty) Reinforced Cement Concrete Pipe With Collars Jointed With Stiff Mixture Of Cement Mortar In The Proportion Of 1:2 (1Cement : 2 Fine Sand ) Including Testing Of Joints Etc. Complete. 150 Mm. Dia. Reinforced Cement Concrete Pipes , Providing And Laying Cement Concrete 1:5:10 (1 Cement: 5 Coarse Sand : 10 Graded Stone Aggregate 40Mm Nominal Size) Upto The Haunches Of Pipes Including Bed Concrete As Per Standard Design.150 Mm. Dia. Reinforced Cement Concrete Pipes , Providing And Fixing Square-Mouth S.W. Gully Trap Grade‘A Complete With C.I. Grating, Brick Masonry Chamber With Water Tight C.I. Cover With Frame Of 300 X300 Mm Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design 150 X 100 Mm Size P Type With Sewer Bricks Conforming To Is : 4885 , Supplying And Fixing C.I.Cover 300X300 Mm Without Frame For Gully Trap (Standard Pattern) The Weight Of Cover To Be Not Less Than 4.5 Kg. , Providing And Fixing 100 Mm Sand Cast Iron Grating For Gully Trap. , Constructing Brick Masonry Manhole In Cement Mortar 1:4 (1 Cement :4 Coarse Sand) Reinforced Cement Concrete Top Slab With 1:2:4 Mix (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1:4:8 Mix (1 Cement :4 Coarse Sand :8 Graded Stone Aggregate 40Mm Nominal Size) Inside Plastering 12Mm Thick With Cement Mortar 1:3 (1 Cement :3 Coarse Sand) Finished With Floating Coat Fo Neat Cement And Making Channels In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nminal Size) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design. Inside Size 90X80cms And 45Cms Deep Including Ci Cover With Frame (Light Duty) 455X610mm Internal Diamensions Total Weight Of Cover And Frame To Be Not Less Than 38 Kg (Weight Of Cover 23 Kg And Weight Of Frame 15Kg).With Fps Bricks Of Class Designation 75(I) For Sewer Line , Extra For Depth For Manholes: Size 90X80cm With Fps Bricks Class I). , Providing M.S. Foot Rests Including Fixing In Manholes With 20X20x10 Cm Cement Concrete Blocks 1:3:6 (1 Cement:3 Coarse Sand :6Graded Stone Aggregate 20 Mm Nominal Size) As Per Standard Designwith 20X20 Mm Square Bar , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cablein Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group A , Wiring For Light/ Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit Alongwith 1 No. 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 6 Sq. Mm + 1 X 6 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 10 Sq. Mm + 1 X 6 Sq. Mm Earth Wire , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required3 X 1.5 Sq. Mm , Supplying And Fixing Metal Box Of Following Sizes (Nominal Size) On Surface Or In Recess With Suitable Size Of Phenolic Laminated Sheet Cover In Front Including Painting Etc. As Required.250 Mm X 300 Mm X 60 Mm Deep , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.5/6 A Switch , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.15/16 A Switch , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.3 Pin 5/6 A Socket Outlet , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.6 Pin 15/16 A Socket Outlet , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. , Supplying And Fixing Following Size/ Modules, Gi Box Alongwith Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required.12 Module (200Mmx150mm) , Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 6 Pin 5/6 & 15/16 A Modular Socket Outlet And 15/16 A Modular Switch, Connections Etc. As Required. , Supplying And Fixing 3 Pin, 5 A Ceiling Rose On The Existing Junction Box/ Wooden Block Including Connections Etc. As Required. , Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage, Connection, Testing, Commissioning Etc. As Required.Upto 450 Mm Sweep , Supplying & Fixing Suitable Size Gi Box Wih Modular Plate And Cover In Front On Surface Or In Recess Including Providing And Fixing 25 A Modular Socket Outlet And 25 A Modular Sp Mcb, C Curve Including Connections, Painting Etc. As Required. , Supplying And Fixing Pvc Batten/ Angle Holder Including Connections Etc. As Required. , Supplying And Fixing Of Following Ways Surface/ Recess Mounting, Vertical Type, 415 V, Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected, Duly Powder Painted, Inclusive Of 200 A Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Bar For Mounting Mcbs (But Without Mcbs And Incomer ) As Required . (Note : Vertical Type Mcb Tpdb Is Normally Used Where 3 Phase Outlets Are Required.)4 Way (4 + 12), Double Door , Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole , Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. , Providing And Fixing M.V. Danger Notice Plate Of 200 Mm X 150 Mm, Made Of Mild Steel, At Least 2 Mm Thick, And Vitreous Enameled White On Both Sides, And With Inscription In Single Red Colour On Front Side As Required. , Providing And Fixing 25 Mm X 5 Mm G.I. Strip On Surface Or In Recess For Connections Etc. As Required. , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required.Above 35 Sq. Mm And Upto 95 Sq. Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required.Above 35 Sq. Mm And Upto 95 Sq. Mm (Clamped With 25X3mm Ms Flat Clamp) , Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum 6.00, Air Delivery Minimum 210 Cum/Min , 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. , Providing And Fixing Circular/ Hexagonal Cast Iron Or M.S. Sheet Box For Ceiling Fan Clamp, Of Internal Dia 140 Mm, 73 Mm Height, Top Lid Of 1.5 Mm Thick M.S. Sheet With Its Top Surface Hacked For Proper Bonding, Top Lid Shall Be Screwed Into The Cast Iron/ M.S. Sheet Box By Means Of 3.3 Mm Dia Round Headed Screws, One Lock At The Corners. Clamp Shall Be Made Of 12 Mm Dia M.S. Bar Bent To Shape As Per Standard Drawing.63 annual periodical maintenance Four Pole , Supplying And Fixing Of Following Rating 240/415 V, 10 Kg. C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connection, Testing And Commissing Etc. Required.63 annual periodical maintenance Four Pole , Supply And Fixing Of Factrory And Wired Metal Wired Metal Clad Dust And Vermin Proof Mountingn. M.S Channel Base With Bottan And Top Cable Entires Electrical Contral Panel With Tpn Mccbs(Four Pole 36Ka With Thermal Magnatic Release)Switches Complete And Insturment Chamber Etc. Complete In All Respects. The Instrument Chamber Shall Be Separate And Shall Complate Of Flush Type Digital Metering System For Phase To Phase Voltage. Current And Other Paraments (Kva.P.F.K.W Etc.)In Each Phase With Toche Type Selector Switch For Diffrent Reading Instruments Fuses Current Transformer Etc. The Panel Board Shall Have Suitable Capacity Electrolytic Aluminum Busbars As Per Is 8623 Or Above Insulated With Heat Shrink Sleeving And Mounted On The Sides. The Mccbs Shall Be Completed Withsuitable Cable End Boxes. Compression Glands And Indicating Lamp On Incoming Etc. The Job Includes The Grounting Of The Board As annual periodical maintenance And Above Well Be Provided With Ammetre. The Panel Board Shall Be Fabricated With Crca Sheet With Ammetre. The Panel Board Shall Be Fabricated With Crca Sheet With A Minimum Thickness Of 1.6Mm /2Mm Cubicle Type Switch Shall Be L/T Or Schnieder Of Equvalent Make.Incoming Mccb 200 Amp- 01 No (For Hall)Outgoing Mccb 100 Amp-01 No Outingoing Mccb 63 Amp-02 Nos , Supply And Fixing Of 16 Gauge Ms Durm With Louvers Duly Painted Including Making Hole In The Wall For Exhaust Fan And Finishing Property Complete In All Respects. , Supply And Fixing Of Hexagonal / Round Gp Fan Box Of Approved Make Made Up 1.0 Mm Thick Isi Marked Gp Sheet Spot Welded Four To Eight Holes Of 25.40 Mm For Pipe Entry Of The Box. Holes Should Be Semi-Shuttered Type With 0.50 Mm Gp Steel Made Upper And Lower Cover Duly Screwed Fitted With 300 Mm Round Zink Coted Ms Bar X 12 Mm And Brand Name Should Be Embossed, Fixing With Wiring Conduit Laid In The Reinforced Cement Concrete Roof Before Concreting Along With Supply Of All Material, Labour, T&P Etc. Required For Proper Completion Of Work. , Supply And Fixing Of Recess / Surface Mounting Round 18 To 20 Watt Cut Out Min 150 Mm, Height Min 40 Mm, Led Down Lighter Having With Heat Sink, Diffuser Die Cast Aluminium Housing With Heat Sink, Diffuser/Reflector And Driver Set, Suitable For 24 Hr. Continuous Operation, Complete In All Respect. 100 Lm/W, Pf0.95, Thd10% At Full Load, Cri80, With 3 Years Warranty. , Supply And Fixing Of Led Street Light Fitting With Mandatory Driver Set Having Die Cast Aluminium Body And Lenxes Suitable For 75 Watt To90 Watt, Confirming To Ip 65 /66 Protection Having Company Logo Engraved Complete In All Respects Including Labour . Mid Power Led With Lences . 100 Im / Watt. providing fixing 0.95 , Thd 10% At Full Load Cri 70 , Potted Drived Set ( Not Circulatory ) , With 3 Year Warranty. , Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cmm/W) Minimum 6.85, Air Delivery Minimum 215 Cmm, 350 Rpm (Tolerance As Per Is : 374- 2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 1200 Mm Sweep Ceiling Fan , Supply And Burring Of Safe Earthing Electrode T-19 ( Hot Dip Galvanised) , Length Up To 3000 Mm , Outer Gi Pipe Of 16 Swg And Inner With Crystalline Conductive Misture (Ccm) Having Anti Corrosive & Conductive Property With 50 Kgs Activated Soil (Bfc) Capable Of Reducing The Soil Resistivty With Good Mixture Of Retaining Capacity Housing ( From Apron To Switch Board Cost Of 25 X 3 Mm Gi Strip Will Be Extra ) Make C.P.R.I. Certified. , Supply/Fixing Of 9 Watt Led Bulb Isi Complete. , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.1.50Mt To 3.0 Mt , Brick Work With (Non Modular) Bricks Of Class Designation 15 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Providing And Fixing Soil, Waste And Vent Pipes : 75Mm Diameter : Sand Cast Iron S&S Pipe As Per Is: 1729 , Providing M.S. Foot Rests Including Fixing In Manoholes With 20X20x10 Cm Cement Concrete Blocks 1:3:6 (1Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) As Per Standard Design:(With 20X20mm Square Bar) , Making Soak-Pit 2.5 M. Diameter And 3 M. Deep With 45 X 45Cm Dry Brick Honey Comb Shaft With F.P.S Bricks And Sw Drain Pipe Complete As Per Standard Design. , Providing, Laying, Spreading And Compacting Graded Stone Aggregate (Up To 65 Mm May Be Used ) To Granular Sub Base (Gsb) Specification Including Premixing The Material With Water At Omc In For All Leads & Lifts,Laying In Uniform Layers With Mechanical Paver Finisher In Sub- Base / Base Course On Well Prepared Surface And Compacting With Roller Of 3 To 8 Tonne Capacity To Achievethe Desired Density, Complete As Perspecifications And Directions Of Engineer-In-Charge , Providing And Laying Factory Made Chamfered Edge Cement Concretepaver Blocks In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parkingetc, Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratorymethod Using Pu Mould, Laid In Required Colour & Pattern Over 50 Mmthick Compacted Bed Of Sand, Compacting And Proper Embedding/Layingof Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratorycompaction By Using Plate Vibrator, Filling The Joints With Sand And Cuttingof Paver Blocks As Per Required Size And Pattern, Finishing And Sweepingextra Sand. Complete All As Per Direction Of Engineer-In-Charge. 80 Mm Thick cement concrete Paver Block Of M-35 Grade With Approvedcolour Design And Pattern , Boring/Drilling Bore Well Of Required Dia For Casing/ Strainer Pipe, By Suitable Method Prescribed In Is: 2800 (Part I), Including Collecting Samples From Different Strata, Preparing And Submitting Strata Chart/ Bore Log, Including Hire & Running Charges Of All Equipments, Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer -In-Charge, Upto 90 Metre Depth Below Ground Level. 300 Mm Dia , Boring/Drilling Bore Well Of Required Dia For Casing/ Strainer Pipe, By Suitable Method Prescribed In Is: 2800 (Part I), Including Collecting Samples From Different Strata, Preparing And Submitting Strata Chart/ Bore Log, Including Hire & Running Charges Of All Equipments, Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer -In-Charge, Beyond 90 Metre & Upto 150 Metre Depth Below Ground Level. 300 Mm Dia , Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well, Unplasticized Pvc Medium Well Casing (Cm) Pipe Of Required Dia, Conforming To Is: 12818, Including Required Hire And Labour Charges, Fittings & Accessories Etc. All Complete, For All Depths, As Per Direction Of Engineer -In-Charge. 150 Mm Nominal Size Dia , Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well Unplasticized Pvc Medium Well Screen (Rms) Pipes With Ribs, Conforming To Is: 12818, Including Hire & Labour Charges, Fittings & Accessories Etc. All Complete, For All Depths, As Per Direction Of Engineer-In-Charge. 150 Mm Nominal Size Dia , Gravel Packing In Tubewell Construction In Accordance With Is: 4097, Including Providing Gravel Fine/ Medium/ Coarse, In Required Grading & Sizes As Per Actual Requirement, All Complete As Per Direction Of Engineer-In-Charge. , Providing And Fixing Suitable Size Threaded Mild Steel Cap Or Spot Welded Plate To The Top Of Bore Well Housing/ Casing Pipe, Removable As Per Requirement, All Complete For Borewell Of: 150 Mm Dia , Providing And Fixing M.S. Clamp Of Required Dia To The Top Of Casing/ Housing Pipe Of Tubewell As Per Is: 2800 (Part I), Including Necessary Bolts & Nuts Of Required Size Complete. 150 Mm Clamp , Providing And Fixing Bail Plug/ Bottom Plug Of Required Dia To The Bottom Of Pipe Assembly Of Tubewell As Per Is:2800 (Part I). 150 Mm Dia , Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc.50 Mm Nominal Size Dia , Supply And Installation Of 1.5 Hp Submersible Pump Set Complete

Contact Information