Bids Are Invited For Acquisition Of Electrical Materials Intended For The Maintenance Of The Street Lighting ... in Brazil

Work Detail

Relay Base With Metal Support On Iron Base And Pvc Socket. Support: Supply Voltage: 100 To 305 V; Frequency: 50 / 60 Hz; Nominal Current: 10 A; Support: 2 Mm Thick And Hot-Dip Galvanized; Allows 360° Rotation For Correct Relay Orientation; Product Material: Polypropylene Socket With Uv Protection, Tinned Brass Contact Terminals With Conductors Joined By Tin Welding; 3-Wire Connection: Phase 1 (Black), Neutral Or Phase 2 (White) And Load (Red) Conductor Cross Section Of 1.5 Mm² And Length Of 30 Cm; Interchangeable With Relays From Other Manufacturers; Dielectric Strength: 2,500 V; Indelible Marking Map Identification Of The Relay Fitting Direction And Identification Of The Fitting Terminals, Arm In Hot-Dip Galvanized Iron Tube For Public Lighting, Without Bend, 48Mm Conductor: Made Up Of Bare Copper Wires, Soft Tempered And Class 4 Or 5 Stranding In Accordance With Abnt Nbr Nm 280. Insulation: Hepr 90°C - Extruded Thermoset Compound Based On High Modulus Ethylene Propylene. Cover: Pvc/St2 90°C - Extruded Thermoplastic Compound Based On Polyvinyl Chloride. Reference Standard: Abnt Nbr 7286, 5Mm2 1Kv Black. Conductor: Made Up Of Bare Copper Wires, 2-Way Control Switch Of 220V~ 50/60Hz; Fiberglass Reinforced Nylon Mounting Bracket, With 360° Rotation That Allows Ideal Key Positioning; Carbon Steel Fixing Support, Fire Zinc Plated; Magnetic Drive Through Contactor; Contacts: Na (Normally Open); Nominal Current: 30 A (Ac3); Number Of Poles: 2 (Two); Built-In Socket (Base); Maximum Load Current Ac5b = 30A - Incandescent Lamps, Bimetallic Connector For 1 Screw, Metal, Star Or Fixed Key Operation; 6-1/0 Lead, Piercing Connector -70. Connector Made Of Polymer Resistant To Weather And Uv Rays, The Insulator Made Of Electrolytic Copper With A Tin Finish And The Rubbers Made Of Elastomer. Main Conductor: 10 - 95Mm²; Derivation Conductor: 1, 5 Up To 10Mm², Insulating Tape. Flexible Pvc Insulating Adhesive Tape, In Black, With Flame Retardant Agent And Rubber And Resin Based Adhesive. Used For Insulation Of Electrical Wires And Cables In General With Voltage Up To 750 Volts. Recommended For Use In Low Voltage Electrical Installations. 19Mm Wide X 0.15Mm Thick. 20 Meter Roll, 100W Sodium Vapor Lamp, E40 Base, Lumin 8550 Flux 24,000H, Color: 2000 K, 250W Sodium Vapor Lamp, Lumin 1305 Flux 32,000H, 70W Sodium Vapor Lamp, E27 Base, Lighting Luminaire With Base E40. Maximum Power: 100W. Produced In Aluminum With Electrostatic Polyester Powder Painting. Maximum Voltage: 250V. Dimensions: Ø 120 (L) X 270 (W) 0.95 - Thd + 10% - Opening Angle

Contact Information