|
10.1 Wooden Frame Composed Of Slats, Rafters And Purlins For Roofs Of Up To 2 Pitches For Capacanal Ceramic Tile, Including Vertical Transport, 10.2 Roofing With Capacanal Ceramic Tile, Paulista Type, With Up To 2 Pitches, 10.3 Immunizing Paint For Wood, 1 Coat, 10.4 Tying Of Ceramic Tiles Or Concrete, 10.5 Ridge For Ceramic Tile Embossed With Mortar Ratio 1:2:9 Cement, Lime And Sand For Roofs With Up To 2 Pits, 10.6 Manufacture And Installation Of Entire Shear In Unprepared Wood, Span Of 6 M, For Ceramic Or Concrete Tile, Including Lifting, 11.1 Plaster Applied To Masonry And Internal Concrete Structures, With Trowel, Mortar Traco 1:3 Prepared In Concrete Mixer 400L, 11.2 Plaster Applied To Ceiling Or Masonry And Structure, With Roller For Acrylic Texture. 1:4 Mixture Mortar And Adhesive Polymeric Emulsion Prepared In A 400L Concrete Mixer, 11.3 Plaster, In 1:2:8 Mixture Mortar, Mechanical Preparation, Manually Applied On Internal Walls, For Rooms With An Area Less Than 5M, E = 10Mm, With Screeds, 11.4 Single Mass, Manually Applied On Walls Interiors Of Rooms With An Area Between 5M And 10M, 11.5 Single Mass, In Mortar Mix 1:2:8 Mechanical Preparation, Manually Applied On Internal Walls Of Rooms With An Area Greater Than 10M, 11.6 Single Mass, Manually Applied On Ceilings, 1.1 Local Administration, 12.1 Ceramic Coating For Internal Walls With Enamelled Type Plates Of Dimensions 20X20 Cm Applied At Half Height Of The Walls, 12.2 Ceramic Coating For Internal Walls With Enamelled Type Plates Of Dimensions 20X20 Cm Applied At The Full Height Of The Walls, 1.2 Sanitary Container Rental, Incl Door, Basc 2 Light Pts, 1 Landing Pt., 3 Vases, 3 Washbasins, Urinal Channel, 6 Showers 1 Electric, Turntable, Registers, Floor Comp., 13.1 Plating Applied To Masonry With The Presence Of Gaps And Concrete Facade Structures, Using A Trowel. Mortar Mix 1:3 With Preparation In Concrete Mixer 400L, 13.2 Slab Applied On Masonry Without The Presence Of Gaps And Concrete Structures Of Facade, 13.3 Plaster Or Single Putty In Mortar Mix 1:2:8, Mechanical Preparation With Concrete Mixer 400L, 13.4 Plaster Or Single Putty In Mortar Mix Trace 1:2:8, 14.1 Lining In Pvc Strips, Beaded, For Residential Environments, Including Unidirectional Fixing Structure., 15.1 Acrylic Sealer Base, Manual Wall Application, One Coat, 15.2 Acrylic Sealer Base, Manual Ceiling Application, 15.3 Standard Acrylic Latex Paint, Two Coats, 15.4 Paint Standard Acrylic Latex, Manual Application On Walls, 16.1 Manual Application Of Acrylic Sealer Base On Exterior Walls Of Houses, 17.1 Sanding Wood For Application Of Background Or Painting, 17.2 Painting White Alkyd Leveling Base On Wood, 17.3 Painting Pigmented Finishing Paint Satin Synthetic Enamel On Wood, 2 Coats, 18.1 Mechanical Compaction Of Soil For Execution Of Radier, Concrete Floor Or Slab On Ground, With Vibrating Plate Type Soil Compactor, 18.2 Ballast With Granular Material Crushed Stone N.3, Applied To Floors Or Slabs On Ground, Thickness Of *10 Cm*, 18.3 Separator Layer For Execution Of Radier, In Canvas Plastic, 18.4 Thin Concrete Ballast, Applied To Floors, Slabs On Ground Or Radiators, Thickness Of 5 Cm, 18.5 Subfloor In 1:4 Cement And Sand Mortar, Mechanical Preparation With 400 L Concrete Mixer, Applied To Wet Areas On Slab, Adhered, Non-Reinforced Finish, Thick 3Cm, 18.6 Air Subfloor
|
