|
Tender for Purchase Of Lab Equipments For Ece Dept , Purchase Of Lab Equipments For Ece Dept , Dc Voltmeter (Digital) (Item Code : C006) 1.Dcvoltmeteranalog - Moving Coil -(0-10)V, Class1.0(±1%Full- Scale)Accuracy - 5 Nos 2.Dcvoltmeteranalog- Movingcoil-(0-30)V, Class1.0(±1%Full-Scale)Accuracy - 4Nos , Dc Ammeter(Item Code : C007) Specifications: •1. Dcammeteranalog-Movingcoil- (0-30)Ma,. 5 Nos 2. Dcammeteranalog -Movingcoil -(0-1000)?a, Class 1.0 (±1 % Full-Scale) Accuracy - 5 Nos , Decade Capacitance Box(Item Code : C0011) Specifications: • Range: 100 providing fixing To 100 ?f • Rotary Switch Selection With 6 Dials. • Maximum Voltage: 350 V. • Accuracy: ±1%. , Decade Inductance Box(Item Code : C0012 Specifications: • Range:10?hto10h. Rotaryswitchselectionwith6dials. • Low-Lossinductors. • Accuracy:±1%. , 8051 Microcontroller Kit(Item Code : C0013) Specifications: •• Operating Voltage: +5 V Dc. • Flash Memory: 4 Kb (At89c51) / 8 Kb (At89s52). • Ram: 128 Bytes Internal Ram. • 16 × 2 Alphanumeric Lcd Display. • Push Buttons / Tactile Switches. • Dip Switches For Digital Input. • Inbuilt Adc Interface: Ldr, Potentiometer. • Inbuilt Dac Interface. • Inbuilt Stepper Motor Driver With Stepper Motor. • Inbuilt Dc Motor Driver With Dc Motor. • 1 × 4 Led Array, 1 × 4 Keypad, 1 × Relay. • 1 × Buzzer, 16 × 2 Lcd Display, 1 × Pwm Driver. • 1 × Hardware Interrupt Key, Inbuilt Rtc. • Inbuilt Eeprom And Uart Module. • 4 × 7-Segment Display. • Supports Both Assembly And C Language Programming. • Pc Interfaceable. , Embedded Trainer Kit (Using Lpc2148) (Item Code : C0014) Specifications: • Cpu - Lpc2148, Core - 16/32 Bit Arm7tdmi-S • Speed - Max 60 Mhz, Flash - 512Kb, Ram (On Chip) - 40Kb, 46 General Purpose I/Opins, Usb2.0 • One 10Bit A/D Converter With 14 Analog Inputs, One 10Bit D/A Converter, Six Pwm & Watchdog • Two Uarts (16C550), Two I2c (400Kb/S), Two Spi • Eight Bit Digital Output, Eight Bit Digital Input,16X2 Characters Lcd And 4X4 Matrixkeypad • One Potentiometer For Giving Analog Input, Relay & Buzzer Interface • I2c Devices: Rtc, Eeprom And Seven Segment Display, On Board Stepper Motordriver • Lm35 Temperature Sensor, One Rs 232 Lines Are Terminated At 9 Pin D Type Connector And Usb Interface • Board Has Inbuilt Power Supply And Mounted In Sturdy Cabinet Accessories • Usb Cable With Utility Software To Download Programs From Pc To Target Board • Power Cord, User Manual , Temperature Measurement Kit (Item Code : C0019) Specifications: • Sensors: Rtd (Pt-100), Thermocouple (Fe-K/J-Type), And/Or Thermistor (Ntc). • Display: 3½ Digit Led/Lcd Digital Display (Typically 200 Mv Fsd). • Temperature Source: Portable Water Kettle Or Heater Block. • Signal Conditioning: On-Board Circuitry For Amplification, Linearization, And Cold Junction Compensation. • Test Points: Multiple 2 Mm / 4 Mm Banana Sockets For Monitoring Input/Output Signals. • Power Supply: 230 V Ac, 50 Hz, Single-Phase. • Accessories: Glass Thermometer, 10 K Ntc Thermistor Probe, K-Type Thermocouple Probe, Patch Cords And User Manual. , Fpga Trainer Kit(Item Code : C0025) Specifications: • Must Use Industry-Standard Mid-Range Fpga Device • Usb-Jtag Programmable, Compatible With Vivado Ise (Webpack). • Power Supply: 5 V Dc Through Usb Or External Adapter. • On-Board Peripherals: Leds, Switches, Push Buttons, 7-Segment Display,Clock Source, Gpio / Pmod Expansion Ports, Uart, Vga / Hdmi, Usb Uart Bridge, Usb Cable. •User Manual.
|
