|
Conventional Lease Of Construction, Execution Of Deposit On Construction Site In Plywood Sheet, Furniture Not Included, Supply And Installation Of Construction Board With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, Manual Excavation For Baldrame Beam Or Footing, Manufacture, Assembly And Disassembly Of Formwork For Footing, In Sawn Wood, E=25 Mm, 4 Uses, Cutting And Bending Of Ca-50 Steel, Diameter Of 8.0 Mm. Af_06/2022, Diameter 10, Diameter 12.5Mm. Af_06/2022, Concreting Of Running Shoes, Fck 30 Mpa, Using Jerica - Laying, Densification And Finishing., Manufacture Of Formwork For Beams, With Sawn Wood, E = 25 Mm. 2 Use, Frame Of Conventional Concrete Structure 5.0 Mm Steel (Beams And Lining), Frame Of Pillar Or Beam Of Conventional Reinforced Concrete Structure Using 10.0 Mm Ca-50 Steel, Concreting Beams, Fck=25 Mpa, Use Of Pump - Launch, 1.2.0.10 Surface Waterproofing With Emulsion Asfaltica, Assembly And Disassembly Of Rectangular Pillar Formwork, Simple Right Foot, 4 Uses., Pillar Frame In Conventional Steel Concrete Structure Of 5.0Mm, Pillar Frame In Conventional Steel Concrete Structure Of 10Mm, Conventional Steel Concrete Structure Frame Of 12.5Mm, 1.2.0.14 Concreting Of Pillars, Fck=25Mpa, With Use Of Pump - Launching, Thickening And Finishing, E = 25 Mm. 2 Uses., Beam Frame In Conventional Concrete Structure Steel 5.0Mm Cras, Beam Frame In Conventional Concrete Structure Steel 10Mm, Conventional Concrete Structure Frame Steel 12.5Mm., Densification And Finishing..., Subfloor In Mortar Mix 1:4 (Cement And Sand), Mechanical Preparation With Concrete Mixer 400 L, 5Cm Ceramic Floor Covering With Extra Satin Type Plates Of Dimensions 60X60 Cm Applied In Environments, Ceramic Floor Covering With Extra Satin Type Plates Of Dimensions 60X60 Cm Applied In Environments, 1.8.0.10 Granite Threshold, Width 15Cm, Thickness 2.0Cm, Linear Sill In Granite, Thickness 2.0 Cm Laid With Mortar 1:6, Ceramic Plinth 7 Cm High, Construction Of Sidewalk (Sidewalk) Or Concrete Floor With Concrete Cast In Situ, Made On Site, Conventional Finish, Thickness 6 Cm, Reinforced, Masonry Sealing Ceramic Blocks Drilled Horizontally 11.5X19x29 Cm (Thickness 11.5 Cm) And Laying Mortar With Manual Preparation. Af_12/2021, Chapisco Applied To Masonry With A Trowel. 1:3 Mortar Prepared In A Concrete Mixer, Single Mass, For Receiving Paint, In 1:2:8 Mortar, Manually Applied To Walls, 20Mm Thick, With Screeds, Plaster, For Ceramic Receiving, Manual Preparation, Manually Applied To Internal Wall Faces, 1.4.0.2 Surface Waterproofing With Asphalt Blanket, One Layer, Including Application Of Asphalt Primer, E=3Mm., Ceramic Coating For Internal Walls With Type Plates Dimensions 31X59 Cm, Class A, Manufacture And Installation Of Entire Steel Shear, 10 M Span, For Fibercement, Metallic, Plastic Or Corrugated Tile Thermoacoustic, Including Lifting, Steel Mesh Composed Of Purlins For Roofs Up To 2 Waters For Corrugated Fiber Cement Tile, Transport Included, Roofing With Thermoacoustic Metal Tile E = 30 Mm, With Up To 2 Waters, Gutter In Galvanized Steel Sheet Number 24, Development Of 50 Cm, Vertical Transport Included, Pre-Molded Slab Unidirectional, Bi-Supported, Ceramic Filling, Total Slab Height (Ench
|
