|
A Polypropylene Bend With A Diameter Of 25 Mm, A Rotation Angle Of 90°, Is Intended For Changing The Direction Of Pipes In Water Supply Systems. Ppr Material, White Or Grey. Operating Temperature Up To 95 °C. Connection Type: Welding. Suitable For Cold And Hot Water Supply. The Surface Is Smooth, Without Cracks Or Scratches, Polypropylene Tee 25–25–25 Mm, Pressure Class Pn20/Pn25, Intended For Cold Water Supply Systems, Ppr Material, Color White Or Gray. Installation Is Carried Out By Welding With A Special Soldering Iron. Be Sure To Check With The Customer: Transitional Or Equal Bore, Steel Pipe With A Diameter Of 15 Mm (Dn15), Pressure Class Pn16, Intended For Hot Water Supply Systems. Composition: Drive, Coupling, Lock Nut. Material: Steel. Type Of Connection - Threaded, Internal And External Thread. Operating Temperature Up To +175 °C. Provides A Tight Connection. Corrosion-Resistant, Has A Durable Protective Coating. The Product Must Be New, Unused And Easy To Install. Be Sure To Check With The Customer The Technical Requirements And Type Of Execution, Brass Valve With A Diameter Of 15 Mm, Designed To Regulate And Shut Off The Flow Of Water In Cold And Hot Water Supply Systems. Working Pressure: At Least 16 Bar. Operating Temperature From +1 To +150 °C. Control Is Manual, Using A Handle. Provides A Watertight And Tight Flow Shut-Off. Corrosion-Resistant, Has A Durable Protective Coating. Connection Type: Internal Thread With Coupling. Suitable For Cold And Hot Water Supply Systems. Be Sure To Check With The Customer The Technical Requirements And Type Of Execution, Polypropylene Plastic Water Pipe, Diameter 20 Mm, Wall Thickness 2.3–3.4 Mm, Pressure Class Pn20/Pn25, Length Of Each Pipe 4 Meters, Total Quantity 50 Pcs, Ppr Material, Corrosion Resistant, Durable, Intended For Water Supply Systems, Installation Is Carried Out By Welding With A Special Soldering Iron, 10-Section Bimetallic Radiator, 500 Mm High, Outer Layer - Aluminum, Inner Layer - Steel, Designed For Central And Autonomous Heating Systems, Wall-Mounted Installation. Connection Type: Side. Working Pressure - At Least 16–25 Bar, Test Pressure - 30 Bar. Thermal Power - No Less Than 1600 W. Operating Temperature Up To +110 °C. Color White. Corrosion-Resistant, Has A Durable Protective Coating. The Item Is New, Unused. Be Sure To Check With The Customer The Technical Requirements And Type Of Connection, Polypropylene Tee 20–20–20 Mm, Pressure Class Pn20/Pn25, Intended For Cold Water Supply Systems, Ppr Material, Color White Or Gray. Installation Is Carried Out By Welding With A Special Soldering Iron. Be Sure To Check With The Customer: Transitional Or Equal Bore., A Polypropylene Bend With A Diameter Of 20 Mm, A Rotation Angle Of 90°, Is Intended For Changing The Direction Of Pipes In Water Supply Systems. Ppr Material, White Or Grey. Operating Temperature Up To 95 °C. Connection Type: Welding. Suitable For Cold And Hot Water Supply. The Surface Is Smooth, Without Cracks Or Scratches, Metal Gate Valve Dn50, Material - Steel Or Brass (Be Sure To Check With The Customer). Purpose: For Water. Connection Type: Flange. The Design Is Standard Bore. Diameter Dn50 (2). Working Pressure - Pn16. Working Medium - Cold And Hot Water. Operating Temperature From -40 °C To +200 °C. Manual Control Using A Lever (Flywheel). Body Made Of High-Strength Material. Corrosion-Resistant, Has A Durable Protective Coating. Installation In Horizontal And Vertical Positions Is Possible. The Product Is New, Unused. Be Sure To Check With The Customer For The Exact Material Execution, A Polypropylene Coupling With A Diameter Of 25 Mm Is Intended For Connecting Polypropylene Pipes Of The Same Diameter. Installation Is Carried Out By Welding With A Special Soldering Iron (Semi-Fusion). Pressure Class Pn20/Pn25. Operating Temperature Up To 95 °C. Color White Or Grey. Suitable For Cold And Hot Water Systems, A Polypropylene Coupling With A Diameter Of 20 Mm Is Intended For Connecting Polypropylene Pipes Of The Same Diameter. Installation Is Carried Out By Welding With A Special Soldering Iron (Semi-Fusion). Pressure Class Pn20/Pn25. Operating Temperature Up To 95 °C. Color White Or Grey. Suitable For Cold And Hot Water Systems, Polypropylene Plastic Water Pipe, Diameter 25 Mm, Wall Thickness 2.3–3.4 Mm, Pressure Class Pn20/Pn25, Length Of Each Pipe 4 Meters, Total Quantity 50 Pcs, Ppr Material, Corrosion Resistant, Durable, Intended For Water Supply Systems, Installation Is Carried Out By Welding With A Special Soldering Iron., A Polypropylene Ball Valve With A Diameter Of 20 Mm Is Designed To Open And Close The Flow Of Water In Cold And Hot Water Supply Systems. The Case Material Is Polypropylene, The Internal Mechanism Is Brass. Valve Type: Ball Valve. Installation Is Carried Out By Welding With A Special Soldering Iron. Pressure Class Pn20/Pn25. Operating Temperature Up To 95 °C. Color White Or Grey. Designed For Cold Water Supply Systems. Corrosion Resistant, Highly Sealed, Durable., A Polypropylene Ball Valve With A Diameter Of 25 Mm Is Designed To Open And Close The Flow Of Water In Cold And Hot Water Supply Systems. The Case Material Is Polypropylene, The Internal Mechanism Is Brass. Valve Type: Ball Valve. Installation Is Carried Out By Welding With A Special Soldering Iron. Pressure Class Pn20/Pn25. Operating Temperature Up To 95 °C. Color White Or Grey. Designed For Cold Water Supply Systems. Corrosion Resistant, Highly Sealed, Durable., Steel Pipe With A Diameter Of 20 Mm (Dn20), Pressure Class Pn16, Designed For Hot Water Supply Systems. Composition: Drive, Coupling, Lock Nut. Material: Steel. Type Of Connection - Threaded, Internal And External Thread. Operating Temperature Up To +175 °C. Provides A Tight Connection. Corrosion-Resistant, Has A Durable Protective Coating. The Product Must Be New, Unused And Easy To Install. Be Sure To Check With The Customer The Technical Requirements And Type Of Execution, Brass Valve With A Diameter Of 20 Mm, Designed To Regulate And Shut Off The Flow Of Water In Cold And Hot Water Supply Systems. Working Pressure: At Least 16 Bar. Operating Temperature From +1 To +150 °C. Control Is Manual, Using A Handle. Provides A Watertight And Tight Flow Shut-Off. Corrosion-Resistant, Has A Durable Protective Coating. Connection Type: Internal Thread With Coupling. Suitable For Cold And Hot Water Supply Systems. Be Sure To Check With The Customer The Technical Requirements And Type Of Execution
|
