Tender For Rate Contract Works To Girls Hostels Ngh, Jindal, Bpcl, Block C, A,B,E Mess in India

Work Detail

Tender For Rate Contract Works To Girls Hostels Ngh, Jindal, Bpcl, Block C, A,B,E Mess--Distempering With Ist Quality Acrylic Distemper. Having Voc (Volatile Organic Compound) Content Less Than 50 G/L. Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour. One Coat As Per Specifications And As Per Directions Of Engineer In Charge Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete As Per Specifications And As Per Directions Of Engineer In Charge. Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : Old Work (One Coat Applied 0.90 1/10 M²) Including Preparing The Surface After Thoroughly Cleaning The Surface To Remove All Dirt, Dust And Foreign Matter, Cost Of Materials, Labour Complete As Per Specifications And As Per Directions Of Engineer-In-Charge. Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade: One Coats On Old Work As Per Specifications And As Per Directions Of Engineer In Charge. Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width. Using Epoxy Grout Mix Of 0.70 Kg Of Organic Coated Filler Of Desired Shade (0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg), Including Filling/Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge. Size Of Tile 600X600 Mm Providing And Applying High Build Acrylate Copolymers -Based Elastomeric Waterproof Coating For External Wall. Parapet & Chajja, Which Is Single Component. Cold Applied, Acrylic Emultion Polymer. Apply Coat 1St Coat With 10% Dilution Water And 2Nd Coat Without Dilution @ 0.27L/M2 In 2 Coats To Achieve Dft Of 110 Microns. The Material Having Followed Technical Properties: Attains Hairline Crack Bridging Up To 1 Mm, Elongation Of >120% As Per Astmd 412; Tensile Strength 1.50 Mpa Per Astm D 412. Pull Off Adhesion, 1.5Mpa As Per Astm D4541. Including Priming The Surface With 1 Coat Diluted With Water In The Ratio 2:1 Spreading @ 0.125 L/M2 As Self-Priming Coat. The Finished Cost To Include Surface Preparation, Making Coving At Junction, Treatment Of Cracks Completely As Per Specification. Providing 12 Mm Cement Plaster With Cement Mortar 1:6 (1 Cement:6 Fine Sand) Includingrounding Off Corners Wherever Required Smooth Rendering. Providing And Removing Scaffolding, Including Cost Of Materials, Labour, Curing Complete As Per Specifications And As Per Directions Of Engineer-In-Charge. Extra For Providing And Mixing Water Proofing Material In Cement Plaster Work In Proportion Recommended By The Manufacturers Including Cost Of Material Etc As Per Specifications And As Per Directions Of The Engineerin- Charge.

Contact Information