|
Tender for Rate Contract For Supply Of Handpump Set And Spare Parts , Supply Of Handpump Set And Spare Parts , Die Set 12Mm With Handle & Bits , Hydraulic Vice 32 Mm. , Heavy Duty Clamp 32 Mm , Heavy Duty Clamp 65 Mm , Connecting Rod Vice , Pipe Lifter Spanner For 32Mm N.B.Pipe. , Pipe Wrench 300 Mm , Pipe Wrench 450 Mm , Pipe Wrench 600 Mm , Pipe Wrench 900 Mm , Double Ended Open Jaw Spanner 17 * 18 In C.V. Steel , Hacksaw Frame , Pump Bucket (Nitrile) For Deepwell Hand Pump(Is: 15500 Part 7) , Sealing Ring For Deepwell Handpumps (Is: 15500 Part 7) , Hex Nut With Bolt M 12 * 40 , Handle Axle Along With Nut & Washer For Deepwell Hand Pump (Is: 15500 Part 4) , Single Side Shielded Bearing Confiming To Is: 15500 Part 4 Suitable For Above Handpumps , Chain Nut With Bolt M-12X40 (Is: 15500 Part 4) , Chain With Coupling For Deep Well Hand Pump , Head For Deepwell Hand Pump (Is: 15500 Part 4) , Third Plate Suitable For Deepwell Hand Pump (Is: 15500 Part 4) (Im-Ll) , Water Tank For Deepwell Hand Pump (Is: 15500 Part 4) (Im-Ll) , Connecting Rod Of 12 Mm Dia. X 3 Mtr. Length , I.S.I.Marked Galvanized Steel Tubes As Per I:S 1239 ( Part-1) /2004 Amdt.1 To 4 Scrwed At Both Ends As Per I:S 554/1999 ( Reaffirmed 2004) . One End Socketed With Isi Marked Socket As Per Is:1239 ( Part -Ii)/1992 ( Reaffirmed 2003) And Other End Protected With Plastic Thread Protector Medium Class , Bore Size (Nominal) Diameter - 32 Mm , Length - 3 Meter , Cylinder Assembly I.M.Ii , Cylinder Body With Brass Liner For Deepwell Hand Pump (Is: 15500 Part 5) , Reducer Cap For Deepwell Hand Pump (Is: 15500 Part 5) (Im-Ll) , Upper Valve Along With Rubber Seat For Deepwell Hand Pump (Is: 15500 Part 6) (Im-Ll) , Upper Valve Assly Suitable For Deep Well Hand Pump (Im-Ll) (Is: 15500 Part 6) (Im-Ll) , Lower Valve Assembly I.M.Ii , Hacksaw Blade (High Speed Steel) , Spacer G.M. I.M.Ii , Rubber Seat Lower Valve (Im-Ll) , Rubber Seat Upper Valve (Im-Ll) , Front Cover , Handle For Deepwell Hand Pump (Is: 15500 Part 4) , Stand Assembly Telescopic For Deepwell Hand Pump , Ring Spanner 17*18 , Crank Spanner 17*18 , I.S.I.Marked Deepwell Handpump Set (India Mark Ii) Confirming To I.S.15500 Completes With Head & Handle Assembly,Water Tank,Telescopic Stand Assembly,Cylinder Assembly Along With 12 Nos. Of 12Mm X 3 Mtr. Length Ms Electrogalvanised Connecting Rods Made Of Bright Bar And 12 Nos.Of Hot Dip Galvanised Riser Pipes 32Mm N.B. X 3 Mtr. Long Fitted With Socket (Made From Seamless Pipe Or Machined Bar & Galvanised) At One End And Thread Protector At Another End.Charges Etc Complete
|
