|
1.1 Conventional Location Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af032024, 1.1.2 Supply And Placement Of Work Sign Made Of Galvanized Sheet 26, Esp. 0.45Mm, Dimension 3X1.5M, Plotted With Vinyl Adhesive, Affixed With 4.8X40mm Rivets, On 20X20mm Metal Structure, Special. 1, 25Mm, Including Support In Autoclaved Eucalyptus Painted With Pva Paint Two 2 Coats, 1.1.3 Simple Concrete Floor Demolition, Manually, Without Reuse. Af092023, 1.1.4 Demolition Of Perforated Block Masonry, 1.2.1 Concrete Fck 20Mpa, Trace 1:2, 7:3 In Dry Cement Mass Medium Sand Crushed 1 - Mechanical Preparation With 600 L Concrete Mixer. Af052021, 1.2.2 Frame Of Miscellaneous Reinforced Concrete Structures, Except Beams, Columns, Slabs And Foundations, Using 8.0 Mm Ca-50 Steel - Assembly. Af062022, 1.2.3 Concrete Fck 25Mpa, 2:2, 5 In Dry Mass Of Cement Medium Sand Pebble - Mechanical Preparation With 600 L Concrete Mixer. Ca-25 Steel, Diameter 10.0 Mm. Af062022, 1.2.6 Cutting And Bending Of Ca-25 Steel, Diameter Of 8, 1.2.7 Unidirectional Precast Slab With Spans Greater Than 3.0 M, Double-Supported, For Flooring, Eps Filling, Prestressed Beam, Total Slab Height Lt 16 Cm Filling+Cover 12+4. Af082025, 1.2.8 Shoring Slab Formwork In Unprepared Wood, Double Right Foot, Including Locking, 4 Uses. Af092020, 1.3.2 Sliding Aluminum Window With 2 Panes For Glazed Glass Included, Frame Frame 6 To 14 Cm, Acetate Or Glossy Finish, Screw Fixing, Without Alizar Garnish, Dimensions 100X120 Cm, Silicone Sealing, Exclusive Contramarco - Supply And Installation. Af112024, 1.3.2 Complete Wooden Door, Dimension 80X210cm, Opening Type, One 1 Leaf, Natural Finish For Varnish Painting, Slatted Plank Type, Including Frame, Alizar And Hardware, Exclusive Varnish Painting, 1.3.3 Supply Of Fixed Iron Grid, For Window Protection, Including Installation And Accessories, 1.4.1 Fence Masonry Made Of Horizontally Drilled Ceramic Blocks Of 14X9x19 Cm Thickness 14 Cm, Block Laying And Laying Mortar With Manual Preparation. Af122021, 1.4.2 Acoustic Subfloor In Mortar Mix 1:4 Cement And Sand, Mechanical Preparation With 400L Concrete Mixer, Applied In Dry Areas, Non-Reinforced Finish, Thickness 6Cm. Af072021, 1.4.3 Granite, Marble Or Granite Flooring In Internal Environments, With A Thickness Of 8 Mm, Including Mixing In A Concrete Mixer, Laying The Joints, Applying The Floor, 4 Polishes With A Polisher, Plastering, Sealer And Wax. Af062022, 1.4.4 Plating Applied To Masonry With The Presence Of Gaps And Concrete Facade Structures, With Projection Equipment. Mortar Trace 1:3 With Manual Preparation. Af102022, 1.4.5 Single Putty, In Industrialized Mortar, Mechanical Preparation, Applied With Mixing Equipment And Mortar Projection On Internal Walls, And 5Mm, Without Flights. Af032024, 1.4.6 Single Putty, In Mortar Mix 1:2:8, Manually Applied To The Ceiling, And 17.5Mm, With Flights. Af032024, 1.4.7 Execution Of Sidewalk With Cast-In-Place Concrete, Made On Site, Stamped Finish, Thickness 8 Cm, Reinforced. Af082022, 1.4.8 Galvanized Steel Sheet Gutter Number 24, 50 Cm Development, Including Vertical Transport. Af072019, 1.4.9 Galvanized Steel Sheet Flashing Number 24, 25 Cm Cut, 1.5.2 Roofing With Ceramic Tile
|
