|
Tender For Supply Of 1 Dual Output Regulated Dc Variable Power Supply-Input Voltage : 230V/50 Hz Ac.Output Voltage : (0-30)V Dc.Output Current : (0-2)A.Dcprotection Circuit : Over Voltage, Over Current And Short Circuit Protection.High Efficiency : Greater Than 85 %.Low Ripple And Noise Less Than 50 Mv.Digital Display 2 Digital Ic Trainer Kit With Breadboard:+5V Dc, 1 A Regulated Power Supply. ±12V Dc /±15V Dc, 200 Ma Regulated Power Supply.Solderless Breadboard With Minimum 840 Tie- Points, Power Distribution Buses.Zif(Zero Insertion Force)Ic Sockets To Accommodated 8 Or 16 Pin Ics.Logic Input And Output Leds For Output Monitoring.16 Buffered Led Outputs.16 Debounced Switch Inputsvariable Clock Generator: 0.5 Hz To 50 Hz.Single Pulse Output : 100 Ms(Buffered,Positive And Negative Outputs).One Seven-Segment Display With 4 Bcd Inputs.Built-In Logic Switches.Manual Clock: Debounced Push-Button(One Pulse Per Press). 3 Digital Storage Oscilloscope-Bandwidth: 50-100 Mhz. Sampling Rate: 1Gs/Sec.Channels: 2 (Minimum). Power Supply: 100V–240V Ac, 50-60 Hz Automatic Measurement: Vpp, Vavg,Rms, Frequency, Period, Vmax, Vmin, Rise Time, Fall Time, + Width, - Width, +Duty, - Duty Etc., Horizontal Scale: 5 Ns/Div – 50 S/Div Or Equivalent Vertical Resolution: 8 Bits (2 Channels Simultaneously) Vertical Sensitivity: 1 Mv/Div – 10 V/Div (At Input) Waveform Math: +, -, X , ÷, Invert, Fft Etc., Waveform Storage: 16 Waveforms Or Equivalentcommunication Interface: Usb Host, Usb Interface. C 7-Inch Color Display Or Equivalent Input Impedance - 1 M? ±2%, // 20 Pf Accessories:2 Xpassive Probes (1X/10X) 4 Pcb Prototype Machine :Manual Software : Copper Cam & Mach3 Mill.Resolution (X/Y) : 3.125 Micrometre.Working Area(X/Y/Z) : 200 X 300 X 120 Mm.Minimum Width Line And Space : 0.1 Mm (4 Mil).Maximum Travel Speed : 58 Mm/Sec(2.28”).Drilling Range: 0.2 – 3.175 Mm(8-125 Mil).Maximum Drilling Cycles : 50 Cycles/Minmain Axle Power Rating : 300W.Main Axle Rotating Speed : 25000 Rpm.Maximum Working Speed : 3500 Mm/Min.Feeding Height: 120 Mm.Working Drive : 0.02 – 0.05 Mm.Repositioning Accuracy : 0.01 – 0.02 Mm.Supported Formats : Standard Gerber, Dxf, Excellon.Capability Of Processing Various Materials:Fr4, Copper Clad, Acrylic, Metal, Aluminium Etc.Power Supply : 230V Ac Please Enable Macros To View Boq Information = Limited
|
