Request For Quotation Purchase Of Spare Parts For The Model 80 Armored Personnel Carrier According To The Cu ... in Kazakhstan

Work Detail

Fine Fuel Filter, Article No. 7401117040-09 Filtration Material – Highly Porous Filter Cardboard Or Phenol-Formaldehyde Impregnated Paper Filtration Fineness – Minimum 3.5, Maximum No More Than 10 Overall Dimensions -165+- 2Mm Outer Diameter – 80-84Mm Inner Diameter – 33-34Mm Throughput – At Least 1.5 L/Min The Complete Set Requires A Set Of Rubber Seals (Body Rings And Small Rod Rings). Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Fuel Pump With Regulator And Fuel Priming Pump Injection Pump, Article No. 334-1111005-20 Unit Complexity: Injection Pump Itself (8 Sections) All-Mode Speed Controller With Boost Corrector Fuel Priming Pump – 33.1106010 Pump Type – In-Line Multi-Plunger Plunger Diameter – 9Mm/10Mm Regulator Type – Mechanical, All-Mode With Anti-Smoke Corrector. Adjustment And Testing – The Pump Must Be Bench Tested And Adjusted By The Manufacturer. The Presence Of Seals On The Adjusting Screws Is Mandatory Complete Set - Supplied Assembled With Installed Injection Pump And Control Levers. All Inlet And Outlet Openings Must Be Closed With Protective Process Plugs. Material: Aluminum Alloy Body Without Cracks Or Pores. Plunger Chambers Must Have A High Density According To The Specifications. Documentation - The Mandatory Presence Of A Product Passport With An Individual Serial Number And A Mark From The Customer’S Representative Or Quality Control Department. Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods., Fuel Tap, Article No. 3151-1104160 Type – Multi-Pass Cork Housing Material: High-Strength Brass Alloy Or Cast Aluminum Control Type – Manual Working Pressure – Up To 0.6 Mpa Frost Resistance, Maintaining The Mobility Of The Cork And The Elasticity Of The Seal At Temperatures Down To -60C Wear Resistance Seals Must Be Made Of Fluorine Rubber Or Special Petrol And Oil Resistant Rubber Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Speedometer Cable 3 M, Article No. Gv300 Length - 3000Mm Design – Steel, Stranded Core (Cable) With A Flexible Protective Sheath Sheath Material – Galvanized Steel Strip With An Outer Coating Of Pvc Or Wear-Resistant Rubber Tip Type M18x1.5 Core Diameter 4-5 Mm Frost Resistance Lubricant Inside The Cable Should Retain Its Properties At Temperatures Down To -50C Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Type E50a. Basic Coverage. High Impact Strength And Ductility Of The Seam. Direct Current Operation (Dc+). 5 Kg Per Pack Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications, The Supplier Must Replace Them Within 15 Working Days. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Front Lamp, Article No. Pf-135 Rated Voltage -28 V Base: P42s/11 Power:40W Flask Type: Pear-Shaped Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Repair Kit For Kamaz-7403 Engine Head, Article No. 7405-1003000-02 Sealing Of Head Liners Only Fluorine Rubber Or Heat-Resistant Silicone Head Gaskets 8Pcs Reinforced Paronite With Metal Edging For All Functional Holes Gas Joint Rings 8Pcs Steel With Copper Plating/Coating Manifold Gaskets Made Of Steel-Asbestos Or Steel-Asbestos Sheets With Increased Fire Resistance The Pan Gasket Is Made From A Rubber-Cork Mixture Seals Front/Rear Silicone Or Fluorine Rubber With Dust-Proof Edge Contents Of A Complete Repair Kit 1) Cylinder Head Group: Head Gaskets, Covers, Gas Joint Rings, Valve Caps (16 Pcs) 2) Cpg Group: Sealing Rings Of Sleeves (24 Pieces - 3 Sleeves Each) 3) Timing Group: Gaskets For Front And Rear Block Covers. 4) Lubrication System - Oil Pump Filter Pan Gasket 5) Cooling System - Gaskets Of The Water Pump, Thermostats, Pipes 6) Fuel System - Copper Washers, Injectors And Injection Pump Gaskets 7) Turbocharging - Gaskets Of Turbochargers, Drain Pipes And Manifolds Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods., Article No. 2517.3813 The Device Is Designed For Continuous Measurement Of Engine Rotation Frequency And Display Of Engine Operating Time Rated Voltage – 24 V Upper Measurement Limit – 3000-4000 Rpm Graduation Value – 100 Rpm Signal Type – Pulse Vibration Resistance - The Device Must Maintain Accuracy Of Readings During Vibrations With A Frequency Of Up To 50 Hz And Acceleration Of Up To 50 M/S2 Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Middle Driving Disk (Intermediate Plate), Article No. 14.1601094 Drive Middle Disk Type – Cast Iron With Automatic Adjustment Mechanism To The Middle Position Feature – Equipped With 4 Lever Mechanisms With Springs Outer Diameter – 350 Mm Material: Special Gray Cast Iron With High Thermal Conductivity Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Transistor Switch With Coil, Article No. 9301.3734 Transistor Switching Block Rated Voltage – 24W System Type – Contactless – Transistor Operating Current Switched Current In The Primary Circuit Of The Coil Up To 5-7A Secondary Voltage Not Less Than 20-25Kw The Switch Housing Must Be Made Of Cast Aluminum With Advanced Fins For Effective Heat Dissipation The Electronic Board Must Have A Varnish Coating Coil Oil-Filled Or Dry Sealed Design The High-Voltage Terminal Must Be Protected Against Current Leakage At High Humidity Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Electrical Tape, Article No. Uiz-13-10-10M Color Red And Black Thickness – 0.15-0.20Mm Width 15-19Mm Quality Indicators Must Have High Adhesion And Not Support Combustion Temperature Range – From -50С To +70С Dielectric Strength Not Less Than 5-6 Kv Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications, The Supplier Must Replace Them Within 15 Working Days. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Fuel Filter Mesh K (Coarse), Article No. 740.1105024 With Filter Bowl Gasket. Element Type – Mesh, Reusable Mesh Material – Brass Or Stainless Steel Cell Size – 0.09-0.15 Mm Throughput – At Least 250 L/Hour Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Oil Filter Filter Element Assembly, Article No. 740-1012040 Type Size – Height 200-205Mm Outer Diameter -100-103Mm Construction Type - Replaceable Paper Element With The Rest Of The Internal Frame And Metal Covers Filtration Material – Highly Porous Filter Paper With Final Impregnation Nominal Filtration Fineness 25-40 Μm Completeness: Each Element Must Be Supplied With A Set Of Sealing Gaskets (Body Rings And Small Ring) Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Article No. Sp-24G-3802000-U-T A Mechanical Device With A Dial Indicator And A Counter Trip Meter. Drive Type: Mechanical, Carried Out Through A Flexible Shaft (Cable) From The Transfer Case. Speed Scale: Marked Up To 120 Km/H Functions: Indication Of Current Driving Speed Accounting For The Total Mileage Of The Car (Odometer) The Device Is Installed On The Drivers Instrument Panel The Device Is Designed For Operation In A Wide Range Of Temperatures And High Humidity. Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Engine Cylinder Head (Assembled), Article No. 740.1003010 The Head Is Supplied Fully Equipped With A Gas Distribution Mechanism And Is Ready For Installation. Complete Set - Body, Intake And Exhaust Valves, Springs, Crackers, Discs, Valve Seats. Housing Material: High-Strength Aluminum Alloy The Valves Are Heat-Resistant Steel, The Outlet Valve Has A Stellite Overlay. Tightness - Tested With Compressed Air (0.4 Mpa) Combustion Chamber Volume – 42.5-45.5 Comprehensiveness - The Presence Of Protective Plugs In The Inlet/Outlet Cooling Channels Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Air Filter Filter Element, Article No. 740.1109560-02 The Set Consists Of A Main And Control Element The Element Is A Cylindrical, Corrugated Curtain Made Of Special Filtered Paper, Reinforced With Metal Mesh Overall Dimensions - 400-410Mm X250-260Mm Inner Diameter – 130-150Mm Filtration Material – Highly Porous Paper Degree Of Air Purification – No Less Than 99.55% Construction – Metal, Outer And Inner Casing, Polyurethane End Caps Quality Of Corrugation - Uniform Distribution Of Paper Curtains Without Sticking; Curtains Must Be Firmly Fixed With An Adhesive Seam Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Rear Light, Article No. Fp133 Multifunctional Rear Light Rated Voltage – 24W Lamp Type – A24,21,3 Case Material: Impact-Resistant Metal Or Reinforced Polymer With Protective Grille Glow Color - Red Blackout – The Design Must Provide The Ability To Install Standard Blackout Attachments Vibration And Impact Resistance The Flashlight Must Withstand Shock Loads Of Up To 10-15G (According To Gost For Military Equipment) Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Article No. 271.1112010-02 The Nozzle Is Designed For Dosed Injection And Fine Atomization Of Fuel In The Combustion Chamber Of A Diesel Engine. Injection Start Pressure – 21.57-22.75 Mpa (220-232 Kgf/Cm2) Number Of Sawing Holes – 5 Holes Nozzle Diameter – 0.30 Mm Effective Flow Area – 0.220-0.240 Mm2 Spray Needle Stroke – 0.22-0.29 Mm Fastening Type: Bracket. Tightness - Complete Tightness Along The Locking Cone Of The Needle At The Joints At A Pressure Of 1-1.5 Mpa Below The Opening Pressure. Spray Quality - Precise, Intermittent Injection Material - The Body And Needle Of The Sprayer Must Be Made Of High-Alloy Heat-Resistant Steel With Appropriate Heat Treatment. Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, A Set Of Cuffs For Repairing The Main Brake Cylinder G-53 (Old Sample 32 Mm), Article No. 49-1602302-01 Kit Includes: 1. Main Conical Cuff – 1 Piece 2. Separate Ring Cuff – 1 Piece 3.Exhaust Valve With Holder – 1 Piece 4. Protective Cap – 1 Pc. Material: Oil- And Petrol-Resistant Rubber Based On Rubber, Resistant To Brake Fluids. Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Set Of Copper Washers (Set Contains At Least 100 Pieces), Article No. 2302028 Material – Honey Grade M1 Or M1p With A Frequency Of At Least 99.9% Material Condition: Soft (Annealed) Honey Resistance - To Diesel Fuel, Motor Oil, Antifreeze And High Temperatures Up To +600C Quantity In Set 100Pcs Applicability: Fuel Equipment, Oil System, Cooling System And Pneumatic System 1)6.8Mm 2)10,12,14Mm 3)16.18Mm 4)20.22Mm Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00

Contact Information