|
Tender for E-rate Quotation of non dsr Items for Preparation of Estimate for Providing, Supplying, Installation, Testing, Commissioning of Recovery Room, Strail Area of Kidney Operation Theater at Regional Refferal Hospital Nashik in Connection With the 2026-27-1 SITC OF : Wall Panel MOC : PCGI (Pre Coated Galvanised Iron): PCGI Sheet thickness - 1 mm, PCGI sheet thickness 0.8 mm with an overall thickness of 50 mm Standard wall & ceiling panels are a composite construction of double skins Panel Thickness : 50mm with 45 Kg/m3 PUF insulation Panels Joints - The panel joints are sealed by silicone for a perfectly flush finish2 SITC OF : Ceiling panels Panel MOC : PCGI (Pre Coated Gavanised iron): PCGI Sheet thickness - 1 mm, PCGI sheet thickness 0.8 mm with an overall thickness of 50 mm Standard wall & ceiling panels are a composite construction of double skins Panel Thickness : 50mm with 45 Kg/m3 PUF insulation Panels Joints - The panel joints are sealed by silicone for a perfectly flush finish.3 SITC OF :Hermatically Sealed Double Swing Door MOC : PCGI Door Size : 1500mm x2100mm: MOC - PCGI / 0.8 mm Sheet for Door Leaf Sheet MOC - PCGI / 1.2mm thick for Door Frame, shutter width of 45mm .Doors are designed to fit flush into the wall/panel system on both sides and are supplied in different dimensions. Stainless steel hinges Stainless Steel D type of handles on pull side Stainless steel push plates on push side. Standard arm door closure (TS-68) View panel along with self adhesive tape and silicon sealant Both side key operated locking arrangement Automatic door bottom seal at the bottom Stainless Steel kick plates4 SITC OF: Hermatically SealedSingle Swing Door MOC : SS 304 Door Size 1000mm x 2100mm: MOC - SS 304 / 0.8 mm Sheet for Door Leaf Sheet MOC - SS 304 / 1.2mm thick for Door Frame, shutter width of 45mm .Doors are designed to fit flush into the wall/panel system on both sides and are supplied in different dimensions. Stainless steel hinges Stainless Steel D type of handles on pull side Stainless steel push plates on push side. Standard arm door closure (TS-68) View panel along with self adhesive tape and silicon sealant Both side key operated locking arrangement Automatic door bottom seal at the bottom Stainless Steel kick plates5 SITC OF :Hermatically Sealed Single Swing Door MOC : PCGI Door Size : 1000mm x2100mm: MOC - PCGI / 0.8 mm Sheet for Door Leaf Sheet MOC - PCGI / 1.2mm thick for Door Frame, shutter width of 45mm .Doors are designed to fit flush into the wall/panel system on both sides and are supplied in different dimensions. Stainless steel hinges Stainless Steel D type of handles on pull side Stainless steel push plates on push side. Standard arm door closure (TS-68) View panel along with self adhesive tape and silicon sealant Both side key operated locking arrangement Automatic door bottom seal at the bottom Stainless Steel kick plates6 SITC OF: Antistatic Vinyl Flooring: Flooring should be seamless with perfectly curved flush-coving, resistant to mechanical stress and dynamic loads and having protection characteristic (Antistatic), Vinyl Specifications - Thickness @ 2mm, Washable vinyl in Sheet form, Flooring should be laid on self leveling compound, Vinyl properties - Complies to EN 433, EN 649. EN 1815, EN 1081 standards TVOC as per AgBB/ DIBt Certifications, ISO 16000-6 It should have antibacterial, antifungal properties 7 Dismantling and shifting of existing Modular Wall Panels (MOC: SS 304, Thickness: 1.0 mm) from OT-1 and OT-2. Work includes removal of perimeter sealants, careful de-fixing of panels from the substructure.8 Reinstallation of SS-304 modular wall panels (1.0mm) removed from OT-1 and OT-2 in the sterile store, including fixing/supplying the GI/aluminium sub-structure, alignment, and applying medical-grade anti-bacterial silicone sealant to all joints to provide a seamless, airtight finish.9 Dismantling of existing SS-304 Hermetically Sealed Double Swing Doors (1500x2100mm) from OT 1, OT 2 & Passage 1 wall system, including safe removal of all associated hardware, automatic seals, and door frames, followed by shifting to the designated area.10 Complete re-fixing and commissioning of existing Hermetically Sealed Double Swing Doors (1500x2100mm) with all associated SS-304 hardware, automatic seals, and perimeter silicone sealing to ensure airtight performance in the sterile area.11 Dismantling of existing Hermatically Sealed Single Swing Door MOC : SS 304 Door Size : 1000mm x2100mm: from OT 1, OT 2 & Passage wall system, including safe removal of all associated hardware, automatic seals, and door frames, followed by shifting to the designated area.12 Complete re-fixing and commissioning of existing Hermetically Sealed Single Swing Door MOC : SS 304 Door Size : 1000mm x2100mm with all associated SS-304 hardware, automatic seals, and perimeter silicone sealing to ensure airtight performance in the sterile area.13 SITC OF : LAF- SYSTEM CONTROL INTERFACE (3 Panel System):Theater Control Interface(TCI)With inside MOT controlling: Designed to have maximum controls within the theatre. 1.Fully IOT based design for 100% real-time remote access 2.Room ambience control, Medical gas monitoring, Room lighting controls, Real-Time clock with Counter are some of the standard features 3.Fire-smoke detection with Automatic Exhaust Activation 4.Fumigation setting & auto control 5.User-friendly GUI with Capacitive multipoint touch screen. 6.Data & Fault Alarm recording 7.USB Data Access port 8.Digital Monitoring of HEPA Pressure & Run Hours 9.One-touch HVAC system controls 10.Paasword driven, 2 Tier control 11.User-settable Micro-level settings, Sensor Calibration etc14 Supply and Installation C-Arm Compatible Electric 8 Functions OT Table of with Mattress Fully Eccentric pillar, Base & Cover made of attractive, easy to clean SS 304. Five Sectional Radio – Translucent Top.Sophisticated mechanics provide smooth,step less articulation of the table Top for precise patient positioning Detachable, head, leg & Pelvic section. In built kidney bridge. Split leg section Nurse Panel, Manual Override. Trendelenburg 25°, Reverse Trendelenburg 25°, Lateral Tilt +20°, Back Section +60°, Head Section +60°, Leg Section 0°-90°, Floor Locking System. Electronic Actuators and Hydraulics to support you during those complicated cases, Medical Grade Stainless Steel used-Handle patients ranging, Rust-proof Stainless Steel 304 with special anti-bacterial coating helps in preventing bacterial conditions, An operating table has a main platform where the patient sits or lies, and a central base that adjusts the height and inclination of the platform. The table may also have a passive arm that can be adjusted during surgery, Operating tables can be adjusted to place the patient in a variety of positions, such as prone for spinal surgery, Operating tables can be stationary Providing a stable and secure platform for surgical procedures: OT tables are specifically designed to provide a stable and secure platform for surgical procedures, helping to reduce the risk of complications and improve patient outcomes.OT tables are designed to support the needs of the surgical team, with features such as adjustable height and integrated medical equipment, helping to improve the efficiency of surgical procedures.OT tables may have features such as adjustable headrests and padding to support the comfort of the patient during the procedure.15 Supply and Installation of single arm pendant complete set with following The pendant horizontal & drop tube is of mild steel powder coated colour (as per cyustomer choice) 1. The length of horizontal tube is 1000mm/asper requirment long and vertical tube is as per height of ICU 2. Pendant carrying capacity of 125kg equipment load pendant rotates at 330degree. 3.Encapsulated central pivot bearing system sealed for life and free maintenance 4. Pendants having heavy platform shelf for keeping monitor-2Nos 5.5. Electrical switch & sockets 5/15amp- 6 Nos 6.BS standrad nemo safe gas outlet points with probe-6 Nos (in our scope) Oxy-2, N20-1 7. Main cabinet is made up of aluminium 8.Double bearing used (not single) for free movement 9.Rotation will be 330 degree from the both side bottom cabinet side and top side 10. Infusion pump pole and IV stand combined installed as modular pendants 2 Nos 11. HP tubing 5mtr, length for each gas
|
