Tenders Are Invited For Modernization Of The Playground In Dębina in Poland

Work Detail

1. Detailed Description Of The Subject Of The Order Entitled Modernization Of The Playground In Dębin.2. Subject Of The Order The Subject Of The Order Is The Development Of Part Of The Plot No. 5/3 Within The Town Of Dębina, Pniewy Commune, Through The Construction Of A Public Playground With The Installation Of Playground Equipment, Elements Of Small Architecture And The Construction Of A Fence. The Scope Of The Order Results Directly From The Plot Development Plan Developed In January 2025 And Includes The Performance Of All Works Necessary For The Proper Functioning Of The Playground In Accordance With The Documentation.3. Investment Location Investment Area: Plot No. 5/3, Dębina District, Pniewy Commune, Szamotulski Poviat. Area Of ​​The Separated Area For The Playground: Approx. 354.74 M². The Square Was Designed On A Plan Similar To A Rectangle With Dimensions Of 21.50 M X 16.50 M.4. Scope Of Works To Be Performed. As Part Of The Order, The Following Should Be Performed: 4.1. Preparation Of The Area• Marking Out The Area In Accordance With The Design, • Removal Of The Fertile Soil Layer Thickness. Approx. 30 Cm In Safety Zones, • Excavations For Safety Zones, • Filling Safety Zones With Dry, Loose Yellow Sand, • Leaving The Remaining Area As A Grass Surface.4.2. Delivery And Installation Of Playground Equipment And Small Architecture Elements. In Accordance With The Designations On The Project, The Following Should Be Delivered And Installed: 1. Three-Person Swing Swing With A Storks Nest - 1 Pc. 2. Disc Carousel With Seats - 1 Pc. 3. Play Set - 1 Pc. 4. Spring Bouncer - 2 Pcs. 5. Gymnastic Quadrangle - 1 Pc. 6. Rope Pyramid, 2.70 M High - 1 Pc. 7. Concrete Football Table - 1 Pcs. 8. Waste Bin - 1 Pc. 9. Park Bench - 3 Pcs. 10. Board With Playground Regulations - 1 Pc. The Devices Should Be Placed In Accordance With The Manufacturers Guidelines And Applicable Standards, Ensuring Stability And Safety Of Use.4.3. Construction Of Fencing Of The Area• Panel Fence System On A Prefabricated Concrete Foundation, • Height Of The Fence: Panel 1.23 M + Plinth 20 Cm, • Technology: Hot-Dip Galvanizing + Powder Coating, • Length Of The Fence: Approx. 76 M, • Entrance Gate With A Width Of Min. 1.20 M, • Upper Part Of The Fence Without Protruding Elements.5. Surface Requirements• Safety Zones Under The Devices: Dry, Loose Yellow Sand, • Remaining Terrain: Grass Surface, • Surfaces Must Meet The Requirements For Fall Absorption.6. Safety And Standards Requirementsall Devices And The Method Of Their Installation Must Meet The Requirements Of The Following Standards: • Pn-En 1176 (All Parts Relating To Playground Equipment), • Pn-En 1177 (Fall-Absorbing Surfaces). Each Device Must Have Certificates Of Compliance With Polish And European Standards And The Required Safety Certificates.7. Conditions For Locating The Playgroundthe Playground Has Been Designed:• Maintaining The Required Distances From Roads, Buildings And Parking Lots, • In An Area With Adequate

Contact Information