|
Comfort Baby Seat. Comfort Baby Seat For Children Up To 13 Kg, From 0 (Zero) Months To 01 (One) Year Of Age, Facing Backward, In The Back Seat Of The Car. Composition/Material Based On Plastic, Black, With Seat Belt With 3 (Three) Points, Removable And Washable Padded Seat, With Canopy. Certified By Inmetro. - Comfort Baby Chair. Comfort Baby Chair For Children Up To 13 Kg, With Canopy. Certified By Inmetro., Safety Chair. For Children From 9 (Nine) To 36 (Thirty-Six) Kg, Approximately 01 (One) To 04 (Four) Years Of Age, Facing Forward, In The Back Seat Of The Car, Compatible With Cars With A Minimum Of 03 (Three) Points On The Seat Belt. With Pillow, Shoulder Pads, Back And Seat Reducing Cushion, Crotch Protector, Color Black, Polypropylene Structure, Removable Cover For Washing. Certified By Inmetro. - Safety Chair. For Children From 09 (Nine) To 36 (Thirty-Six) Kg, Removable Cover For Washing. Certified By Inmetro., Lunch Set With 04 Seats With Wheeled Supervisor Chair, Table With Top Made Of 30 Mm Multi-Laminated Plywood With Pvc Edges Around Its Entire Perimeter, Fixed To The Structure Using Screws. Measuring 1830 X 960 Mm, With 04 Cavities 300 Height Between The Seat And The Top Of Approximately 160 Mm, Minimum Space For The Legs Of Approximately 120 Mm In Height And 100 Mm In Width. A Nylon Seat Belt On Each Seat. The Seat Must Have A Rounded Finish So As Not To Hurt Childrens Legs. Rear Side Of The Table In The Form Of An Arch With 1000 Mm In Area, Allowing Easy User Access To All Points Of The Table. Top/Floor Height 760 Mm. Top Support Structure Formed By 20X48 Mm Oblong Tubes, Molded According To The Curvature Of The Top, 50 By 30 Mm Tubes At The Ends Of The Internal Part Of The Top, 4 Columns, 2 On Each Side, In Rectangular Industrial Steel Tubes 80 By 40 Mm Connecting The Top Structure To The Feet, 1 Bar Support Between Side Columns In Rectangular Tube Measuring 50 X 30Mm. Double Ski-Shaped Feet Made From 50 X 25 Mm Tube. Front Shoes Measuring 50 X 50 Mm And Rear Shoes Measuring 50 X 200 Mm, Non-Slip And Also With Paint Protection Function. The Entire Metallic Structure Is Manufactured From Industrial Steel Tubes Treated By Sets Of Chemical Baths For The Protection And Longevity Of The Structure, Interconnected By Mig Welding And Painted Using An Epoxy Powder System. The Furniture Should Not Pose Any Risk To Babies. Swivel Supervisor Chair With Seat And Back In Virgin Plastic Resin, Manufactured Using The Thermoplastic Injection Process. Seat Measuring 400Mm Wide By 460Mm Deep, With A Minimum Thickness Of 4Mm, Fixed By Screws. Backrest Measuring 400Mm L, Childrens Dining Room Set - Abs Resin Table With 02 Formica Stoolstable With Split Top, Smooth, Made Of Abs Resin, Measuring 1600Mmx800mmx590mm, Equipped With Ribs With A Minimum Thickness Of 5Mm, Edges Measuring 30Mm Seamless, Fixed To The Structure By Means With Non-Visible Screws, Base Of The Table Top Formed By 01 Square Tube Measuring 25Mm X 25Mm Positioned Under The Top, Manufactured Using The D Process
|