|
Tender For Vi Work At Thekkin Koottam- 1 Stringing Of 11 Kv Aerial Bunched Cable Of Size 3 X 120 + 1 X 95 Sqmm With Bare/Insulated Messenger Through Existing Poles 2 Erection Of Anchor Clamp / Dead End Clamp For 11Kv Abc Of Any Size 3 Erection Of Suspension Clamp For 11Kv Abc Of Any Size 4 Providing Cable Tie 5 Fiting One No Mvt On Existing Cross Arm Excluding Termination Work (For One Phase) Of Any Rating For 11 Kv Ab Cable 6 Doing One Cable End Termination On Ht Abc Of Sizes Up To 3X150+1X120 Sqmm And Connecting To Existing Mvt Or Other Terminals,Using The Cable End Termination Kit Supplied Departmentally Including Charges For Cable Jointer Etc. Complete As Per The Direction Of The Departmental Officers. 7 Doing Straight Joint On Ht Xlpe Ug Cables Of Sizes Upto And Including 3X185 Sqmm Using The Cable Jointing Kit Supplied Departmentally As Per Specification After Providing Proper Traffic Signalling And Caution Board Fencing Etc. Wherever Necessary, Including Charges For Cable Jointer And Other Sundries Etc. As Per The Direction Of Departmental Officers At Site. 8 Erecting One 100Kva Transformer To Existing Dp And Giving Connections, Including Loading From Tmr/Srs/Other Stacking Place & Unloading At Site But Excluding Cost For Transporting Transformer. 9 Transporting Transformers By Hired Vehicle To A Distance Upto 5Km And Carrying Upto 2 Numbers Of 63/100/160/250Kva Transformers / Ring Main Units Excluding Loading& Unloading Charges. 10 Labour Charges For Loading Ht A Type Pole From The Stacking Place And Unloading The Same At Work Site (Transportation By Any Vehicle). 11 Fitting And Erecting One Ht Double Pole Structure Using A Type Pole In Position Including Fitting 2 No. Channel Cross Arm, Digging And Back Filling Pit In Ordinary Soil, Drawing Sufficient Length Of Gi Earthing Leads Through All Cross Arms To The Ground For Earthing (Excluding Provision Of Earthing). 12 Fitting One Additional 2.4M/3M Channel Cross Arm (100X50X6Mm), In Existing 11Kv Dp Including Conveyance Of Materials. 13 Fitting One Set Ab Switch On Existing Dp, Giving Connection And Drawing Sufficient Length Of Gi Earthing Leads To The Ground For Earthing, Excluding Provision Of Earthing. 14 Additional Rate For Excavation Of Pit For A Type Pole In Laterite. 15 Additional Rate For Excavation Of Pit For A Type Pole In Hard Laterite. 16 Fitting One Set (3No.) 11Kv La And Giving Connections Excluding Earthing. 17 Transporting Poles By Hired Vehicle To A Distance Upto 5Km And Carrying Upto 4 Numbers Of Poles Excluding Loading& Unloading Charges. 18 Additional Rate For Refitting/Redoing One Disc Set While Renewing Any Type Of 11Kv Cut Pole. 19 Additional Rate For Providing One Ht Pin With Insulator, Complete On Any Type Of Ht Pole. 20 Fitting One Additional 75X40Mm, 1.8M Channel Cross Arm In Existing Single Pole Including Conveyance Of Materials. 21 Fitting One Lt 2 Line Cross Arm On Ht Or Lt Existing Poles Including Fitting Insulators And Binding The Same With Lt Line. 22 Providing Concrete Muffing Of Size 0.45X0. 45X1.5M (0.5M Above Gl And 1M Below Gl). Excavation 0.45X0.45X1M, Concrete (1:3:6, 20Mm) 0.45X0.45X1.5M, Plastering (1:3) 12Mm 0.45X0.45Mx5Sides. 23 Erecting Ht A-Type Pole As Support Pole For Abc Stringing Work -New 24 Dismantling (Without Damage) One Lt Psc/Rcc Pole After Disconnecting Stays, Strut Etc. Attached Thereon And Stacking The Same. 25 Dismantling One Damaged Lt Psc/Rcc Pole After Disconnecting Stays, Strut Etc. Attached Thereon And Stacking The Same. 26 Additional Rate For Refitting/Redoing One Shackle Set, Including Reshacling One Span, While Renewing Any Type Of Lt Pole. 27 Fitting One Additional V Cross Arm In Existing Single Pole Including Conveyance Of Materials. 28 Transferring Lt Three Phase 4/5 Wire Oh Line To Newly Erected Ht/Lt Pole Including Dismantling Existing Cross Arm And Insulators, Refitting The Same On The New Pole, Binding Etc. Complete. 29 Fitting One Lt 4 Line Cross Arm On Ht Or Lt Existing Poles Including Fitting Insulators And Binding The Same With Lt Line. 30 Transferring Lt Single Phase 2/3 Wire Oh Line To Newly Erected Ht/Lt Pole Including Dismantling Existing Cross Arm And Insulators, Refitting The Same On The New Pole, Binding Etc. Complete. 31 Labour Charges For Loading Ht Psc Pole From The Stacking Place And Unloading The Same At Work Site (Transportation By Any Vehicle). 32 Erecting 9M Psc Pole As Support Pole For Abc Stringing Work-New 33 Erection Of Suspension Clamp For Lt Abc Of Any Size 34 Dismantling One Section Fuse From Structure And Bringing Back To Section Store. 35 Fitting One No. Section Fuse On Lt Line With Dropping Cables, Crimping Sockets, Connecting With Bolt & Nut Etc. 36 Disconnecting And Lowering Down The Single Phase Wp Service Connection With Guy Wire From The Oh Line And Reconnecting The Same After Completing The Line Work. 37 Disconnecting And Lowering Down The Three Phase Wp Service Connection With Guy Wire From The Oh Line And Reconnecting The Same After Completing The Line Work. 38 Labour Charges For Loading Lt Psc Pole From The Stacking Place And Unloading The Same At Work Site (Transportation By Any Vehicle). 39 Erecting One Lt Psc Pole In Position Including Digging & Back Filling Pit In Ordinary Soil. 40 Dismantling One Ordinary Street Light/Cfl/Led Fitting From Existing Pole And Refitting The Same On Newly Erected Pole Including Disconnecting And Reconnecting Wires. 41 Pole Numbering Using Printed Aluminium Sheets Of 22 Swg Having Size 20 X 12 Cm Or Painting The Surface Of Line Supports Where Numbers Are To Be Inscribed, Pole Numbers Shall Be Painted In Circular / Rectangular Background, Using Approved Quality Anti Algal Yellow Paint In Two Coat After Scraping And Cleaning The Surface At A Height Of 2.5 Metre Above Ground Level. The Number And Letters Should Be In Black Synthetic Enamel Paint. The Size Of The Number Should Be At Least 2Cm In Height X 1.5Cm In Width. Including Cost Of Paint. 42 Additional Rate For Excavation Of One Earth Pit (2.5M Depth) In Laterite. 43 Additional Rate For Excavation Of One Earth Pit (2.5M Depth) In Hard Laterite. 44 Providing One Coil Earth Using No.8 Gi-Earth Wire (50Mm Dia, 115 Turns) Including Digging Separate Pit (0.45X0.45X1.5M) At Standard Distance Away From The Pole/Structure In Ordinary Soil & Backfilling. 45 Additional Rate For Excavation Of One Pit For Coil Earthing In Laterite 46 Providing One Earth Using Gi Earth Pipe Of Size 38.1Mm Dia, 2.5M Length Including Digging Separate Pit (0.45X0.45X2.5M) At A Minimum Distance Of 1.5M Away From The Pole/Structure And Maintaining Standard Distance Between Different Earth Pipes In Ordinary Soil & Backfilling. 47 Fitting 5 Channel Cross Arms, Ab Switch, Do Fuse, La(Ord), Ht & Lt Connections Upto Oh Lines, Etc. On Existing Dp Structure, Fixing Distribution Box/Provision For One Set (3No.) Of Lt Fuses, , Drawing Sufficient Length Of Gi Earthing Leads To The Ground For Earthing, Excluding Provision Of Earthing & Mounting Of Transformer On Poles. 48 Drilling Hole Of Various Sizes On Existing Channel/Cross Arm. 49 Fitting One Additional Fuse Unit And Giving Connection From Transformer To Fuse And Distribution Box To Lt Oh Line. 50 Erection Of Lt 2 Way Distribution Box (Normal Size 130X40X90Cm) On Existing Cross Arm, Giving Connection Including Cable And Earth Connection (Excluding Earthing). 51 Errection And Commissining Of Street Light Metering With Timer 52 Conveyance Of One Km 11Kv Line Materials From Section Store/Stacking Place To The Work Site (Excluding Poles). 53 Fitting And Providing One Ht Stay For 11Kv Pole, Including Digging And Back Filling Pit In Ordinary Soil. 54 Fitting And Providing One Strut Using Ht Psc Pole Including Digging And Back Filling Pit In Ordinary Soil. 55 Fitting And Providing One Ht Fly Stay For 11Kv Pole Using Ht Psc Pole Including Digging And Back Filling Pits In Ordinary Soil, Drawing Sufficient Length Of Gi Earth Leads To The Ground For Earthing (Excluding Provision Of Earthing). 56 Additional Rate For Excavation Of One Pit For Ht Pole/Ht Stay In Laterite. 57 Additional Rate For Excavation Of One Pit For Ht Pole/Ht Stay In Hard Laterite. 58 Providing Transformer Fencing To A Height Of 1.8 M Above Ground Level Using Ms Angle Frames Of Size Isa 50X50X6Mm For Outer Frame, 2 Runs Of 40 X 6 Ms Flat For Horizondal Brasing And Grills With Ms Rods 8 Mm Dia @ 10Cm C/C For Verticals, Providing Gate With Locking Arrangements, Providing Danger Board & Name Board, Embeding The Legs In Cement Concrete 1:2:4, Footing Of Size 30Cmx30Cmx50Cm, Painting With Synthetic Enamel Paint Two Coats Over One Coat Of Iron Primer Etc Complete, Incl Cost Of Transportation 59 Cleaning And Levelling Of Transformer Yard/Rmu, Spreading 40 Mm Broken Stone In Yard For A Thickness Of 10 Cm Above Bed Of 10 Cm Thick 6 Mm Broken Stone, After Constructing A Curb Wall Of Height 20Cm Above Ground And 10Cm Below Level Including Cost Of All Materials And Charges For Conveying, Spreading, Consolidating Etc. 60 Installing One Dtr Meter With Box (Normal Size 40X25X100Cm) On Existing Poles Including Fixing Of 3 Cts On Bus Bar, Laying And Termination Of Control Cable Using Proper Lugs, Fixing Of Meters, Capacitors, Control Fuses And Giving The Complete Connections Including Conveyance Of Materials.
|