Tenders Are Invited For Reconstruction Of The Road In Bachorce In The Kruszwica Commune in Poland

Work Detail

Common Procurement Vocabulary: Cpv 45230000-8 Construction Works For The Construction Of Pipelines, Communication And Power Lines, Highways, Roads, Airports And Railways; Land Leveling. Ordering Party: Kruszwica Commune. Completion Date: 3 Months From The Date Of Conclusion Of The Contract. 1. The Subject Of The Order Is The Renovation Of A Road Consisting In The Renovation Of The Surface. Existing Condition. The Area Covered By The Study Is A Section Of Municipal Road No. 150814C With A Bituminous Surface With A Road Width Ranging From Approximately 5.5 M To 6 M. The Section Covered By The Study - From Km 0+100 To Km 1+541.7 (Excluding The Railway Area - Plot No. 175/13 From Km 1+091.5 To Km 1+187.7). The Municipal Road On The Section From Km 0+100 To Km 0+500 Has A Semi-Street Cross-Section With A Sidewalk Made Of A Mineral-Bitumen Mixture Located On The Right Side Of The Road, In The Further Section There Is A Road Cross-Section Without Separated Pedestrian Routes. The Area Is Drained By Water Flowing Onto The Adjacent Area. The Area Covered By The Study Includes A Water Supply, Telecommunications And Energy Networks. The Scope Of The Renovation The Planned Renovation Includes Strengthening The Surface By Laying A Wearing Course With An Average Thickness Of 5 Cm (Min. 4 Cm) - Making A Bituminous Overlay Made Of Ac 11 S Kr 1-2 Asphalt Concrete. The Scope Of The Renovation Was Divided Into 3 Sections: - Section No. 1 From Km 0+100 To Km 0+541.5 Along With The Intersection With The District Road No. 2577C And The Municipal Road (Semi-Street Cross-Section), - Section No. 2 From Km 0+541.5 To Km 1+091.5 (Road Cross-Section, From The End Of Section No. 1 To The Railway Line), - Section No. 3 From Km 1+187.7 To Km 1+541.7 (Road Cross-Section To The Intersection With The Municipal Road). The Drawings Showing The Scope Of Renovation Include Coordinates At The Ends Of Each Section. The Scope Of Renovation Within The Railway Areas Should Be Determined By A Surveyor So As Not To Carry Out The Works In Areas Not Belonging To The Kruszwica Commune. Plots Covered By The Study: 120/6, 120/5, 229/1, 201, 164, 165. Surface Milling Should Be Performed At The Junction With The Existing Surface Within The Intersection At The End Of The Section Covered By The Works And Locally On The Road Section Next To The Sidewalk (Corrective Milling). It Is Also Planned To Cut The Existing Ground Roadsides With The Material Being Transported To The Contractors Landfill And Disposed Of. The Roadsides Should Be Hardened Using Crushed Aggregate C90/3 0/31.5 - A Layer 15 Cm Thick, The Sides Width 75 Cm. It Is Also Planned To Renovate A Section Of The Sidewalk With A Bituminous Surface Along With Replacing The Frames. (Section From Km 0+429 To Km 0+511) Along With Exits - Replacement Of Frames And Construction Of A Bituminous Surface With A Thickness Of On Average 5 Cm And A Width Of About 2 M. The Exit With A Concrete Block Surface Along The Sidewalk, To Property No. 46, Should Be

Contact Information