Tenders Are Invited For Waste And Rubbish Containers And Bins – Purchase Of Containers For Collecting Munici ... in Poland

Work Detail

Waste And Rubbish Containers And Bins – Purchase Of Containers For Collecting Municipal Waste And Delivery To The Municipal Services Center In Częstochowa. The Subject Of The Order Is The Purchase Of Containers For Collecting Municipal Waste In Accordance With The En-840 - 5.6 Standard, And In Accordance With The Following Specifications, With Delivery To Cuk In Częstochowa: • The Containers Must Be Made Of High-Density Polyethylene (Hdpe) Intended For Outdoor Use, Stabilized Against Uv Radiation. The Material Cannot Undergo Degradation Resulting In Loss Of Functional Properties During The Warranty Period. • Containers With Sockets For Mounting Transponders With A Diameter Of 30 Mm In Accordance With Ral Gz951/1 Or Equivalent. The Contractor May Demonstrate Equivalence Using The Means Of Evidence Referred To In Art. 104-107 Pzp, In Particular: Certificates Issued By An Accredited Conformity Assessment Body, Test Reports Or Technical Documentation Of The Manufacturer. • The Plastics And Dyes From Which The Containers Are Made Do Not Contain Cadmium, Lead Or Other Elements Harmful To The Environment. • Two Wheels With A Diameter Of 200 Mm And Larger With A Metal Axle (All Two-Wheeled Containers) And Four Wheels, Including Two With A Brake, With A Diameter Of 200 Mm And Larger On A Turntable (All Four-Wheeled Containers). • Container Axes Are Galvanized, Resistant To Corrosion (Or Other Process Or Material Meeting The Requirements For Corrosion Resistance) • For Containers Smaller Than 1100 L, A Flat Cover Equipped With A Handle In The Form Of An Embossment In The Form Of One Cover Strip On At Least 60% Of The Cover Width Or In The Form Of At Least Two Single Handles, Attached To The Body With Reusable Pins. • For 1100L Containers, There Is A Flat Cover, Which Consists Of Two Integrated Parts In The Form Of A Main Flap And A Smaller Flap Built Into It Or A Divided Flap. After Lifting, The Smaller Flap Should Remain In This Position (Not Fall). The Size Of The Smaller Flap Flap Within A Flap And The Insertion Hole Is At Least 700X250 Mm. • Flaps Of All Containers Without Metal Elements, Such As Pins, Axles, Clips, Hooks, Etc. All Elements Should Be Made Of Plastic. • Embossing On Covers Or Bodies: En-840 Standards, Year Of Production, Capacity And Load Capacity. • Containers Adapted For Emptying By Typical Garbage Trucks With A Comb Strip (Type A Strip) And Rear Hydraulic Booms (Only For Four-Wheeled Containers). • Guarantee That The Products Properties Will Be Maintained In The Temperature Range -30 °C To 80 °C • Minimum Load Capacity Of The Containers (Weight Of The Load With The Container) Mgb 120 – 60 Kg, Mgb 240 – 110 Kg; Mgb 360 – 160 Kg, Mgb 770 – 360 Kg Mgb 1100 – 510 Kg. • Minimum Empty Weight Of Containers 120L. – 8 Kg, 240L. – 11 Kg, 360L. – 15 Kg, 770L. – 39 Kg, 1100L. – 43 Kg • The Maximum Height Of The Post For 2-Wheeled Containers Is Set At 12 Pcs., And For 4-Wheeled Containers - 5 Pcs. • Partially Assembled Containers (Lid Mounted), Axles With Wheels Delivered Collectively For Each Post In The Container At The Top Of The Post Or Attached To It •

Contact Information