Bids Are Invited For Price Registration For Future And Eventual Acquisition Of Classroom Furniture, Of Inter ... in Brazil

Work Detail

2-Door Steel Cabinet.10 2-Door Steel Cabinet Minimum Specifications: Minimum Specifications: Dimensions (Hxwxd): 200Cm Height X 80Cm Width X 40 To 45 Cm With Variation Of +/- 5%. Made From 22 (0.75) Standard Cold-Rolled Steel Sheet On The Sides, Bottom And Doors. It Has An Upper Lock Made Of 20 (0.90Mm) Steel Sheet With 3 Perpendicular Folds, The First Being 25Mm At 90º, The Second At 25Mm At 90º, The Third At 15Mm At 90º And Ending At 10Mm, And With A Lever System For Locking On The Sides. It Has A Lower Lock Made Of 20 Mm Steel Sheet (0, 90 Mm) With 2 Perpendicular Folds, The 1St Being 20 Mm At 90º, The 2Nd At 45 Mm At 90º And Ending With 15 Mm And A Lever System For Locking On The Sides. Have Sides Made Of Steel Sheet 22 (0.75Mm) With 4 Folds At Perpendicular In Vertical Direction With The 1St At 5Mm With 180º, The 2Nd At 5Mm With 90º, 3Rd At 10Mm With 90º, The 4Th At 1900Mm With 180º And Ends With 5Mm And In Its Depth With 6 Folds, Steel Wardrobe Cabinet With 16 Doors. Locking By Lock And Rod.Following The Provisions Of Item 4.4.2 Of The Abnt 13961:2010 Standard, With Rounded Edges And Free Of Burrs, And Must Not Have Sharp Edges As Per The Sharp Edge Test (5.8 Da Nm 300-1). Made Of Steel Plate #22 (0.75Mm) Fully Mountable With Inverted Cats Claw Locks That Do Not Need The Use Of Screws, It Has 1 Span With 4 Overlapping Doors In Steel Sheet #22 (0.75Mm) With Full Fitting Inside The Span, Consisting Of 1 Initial Module. Sides: Made Of Steel Plate # 22 (0.75Mm) In Measurements Of 1930Mm(H) Wood (Mdp) Composed Of At Least 4 Drawers, With Label Holder And Handle Type Handle On Each Drawer. Tops 15Mm Or Higher Composed Of Mdp On The Top And Bottom With Mdp Finishes, Covered On Both Sides In Gray With A Pvc (Polystyrene) Tape Finish With A Minimum Thickness Of 1.00Mm. It Has Sides, Bottom And Drawers Made Of Mdp, Covered On Both Sides With A Pvc (Polyethylene) Tape Finish With A Minimum Thickness Of 0.45 Mm. It Must Have At Least 2 Duraplac Backs Of At Least 3Mm Coated On Both Sides Measuring 1210Mm(W) X 425Mm(D). It Must Have At Least 04 (Four) Drawers With Fronts Made In Mdp Measuring 441Mm(W) Steel 12 Doors Colorful -10 Mini Steel Wardrobe 12 Doors - Minimum Specifications: 04 Bodies And 12 Doors: With 3 Doors Each Body, Totaling 12 Steel Doors - Steel Body Made From Steel Plate # 26 (0.45Mm) Fully Mountable With Inverted Cats Claw Locks That Does Not Require The Use Of Screws, Has 1 Bay With 3 Superimposed Doors In Steel Plate #26 (0.45Mm) With Full Fit Inside The Bay. Sides: Made Of Steel Plate #26

Contact Information